2200000297 USB Cables / IEEE 1394 Cables by Basler – High-Performance Connectivity for Industrial Applications

The USB Cables / IEEE 1394 Cables 2200000297 by Basler are engineered to deliver high-speed, reliable connections for industrial imaging and data transfer applications. Designed for Basler cameras and devices, these Cable Assemblies ensure optimal signal integrity and long-term durability. Whether for factory automation, machine vision systems, or robotics, these Wire & Cable solutions meet the rigorous demands of professional environments.

In this blog, we’ll cover technical specifications, key features, application areas, installation tips, and how to download the datasheet or order from Xon Electronics. These USB Cables / IEEE 1394 Cables are trusted worldwide for reliable connectivity.

Technical Specifications of 2200000297

• Manufacturer: Basler

• Model: 2200000297

• Type: USB Cables / IEEE 1394 Cables

• Connector Type: USB 3.0 Type A to Micro-B

• Cable Length: 5 meters

• Data Transfer Rate: Up to 5 Gbps

• Shielding: Double-shielded for EMI protection

• Jacket Material: PVC for flexibility and durability

• Compliance: RoHS compliant

• Category: Wire & Cable, Cable Assemblies, USB Cables / IEEE 1394 Cables

This high-quality Wire & Cable solution is ideal for high-speed data transmission in demanding industrial settings.

Key Features of 2200000297

• USB 3.0 support for ultra-fast data transfer up to 5Gbps

• Robust construction with double shielding to prevent signal loss

• Compatible with Basler cameras and industrial devices

• Flexible PVC jacket for easy routing and installation

• High-quality Cable Assemblies built for long-term reliability

The 2200000297 USB Cables / IEEE 1394 Cables by Basler are perfect for engineers seeking durable and efficient Wire & Cable solutions for mission-critical systems.

Applications of 2200000297

• Industrial automation and machine vision systems

• Robotics and control panels requiring reliable data connectivity

• High-speed imaging in scientific and medical applications

• Embedded systems and factory floor devices

• Custom Cable Assemblies for OEMs and system integrators

These USB Cables / IEEE 1394 Cables ensure uninterrupted data transfer in various professional and industrial environments.

Installation and Configuration Overview

To use the 2200000297:

• Connect the USB Type A end to the host PC or controller.

• Attach the Micro-B end securely to the Basler camera or device.

• Route the cable carefully to avoid sharp bends and physical strain.

• Ensure the cable shielding is properly grounded in sensitive environments.

These Cable Assemblies are designed for easy integration and robust performance in high-traffic installations.

Use Case Scenario: Machine Vision in Factory Automation

Scenario: A manufacturing plant needed reliable Wire & Cable solutions to connect high-resolution Basler cameras to industrial PCs for quality control.

Problem: Generic cables caused frequent signal drops and production delays.

Solution: The 2200000297 USB Cables / IEEE 1394 Cables by Basler provided stable high-speed connections and EMI shielding for interference-free operation.

Result: Improved image capture reliability, reduced downtime, and enhanced production efficiency.

This demonstrates the critical role of high-quality Cable Assemblies in advanced automation systems.

Why Buy from Xon Electronics?

Xon Electronics offers genuine Basler USB Cables / IEEE 1394 Cables with:

• 100% Authentic Products for Industrial Applications

• Fast Shipping to USA, India, Australia, Europe & more

• OEM and Bulk Order Discounts Available

• Technical Assistance for Selection and Integration

• Secure Ordering at www.xonelec.com

Choose Xon Electronics for premium Wire & Cable solutions trusted by engineers worldwide.

FAQs – 2200000297 USB Cables / IEEE 1394 Cables by Basler

Q1. What devices are these cables compatible with?
They are optimized for Basler cameras and other USB 3.0 devices.

Q2. What is the cable length?
5 meters for flexible installation in various setups.

Q3. Are these cables shielded?
Yes, they are double-shielded for EMI protection.

Q4. Can I use them in industrial environments?
Absolutely, they’re built for robust and durable performance.

Q5. Are they available globally?
Yes, at www.xonelec.com with delivery to USA, India, Australia, Europe & more.

Conclusion

The 2200000297 USB Cables / IEEE 1394 Cables by Basler provide high-speed, reliable connectivity for industrial and professional applications. Engineered for performance and durability, these Cable Assemblies are a must-have for mission-critical systems. Order today from Xon Electronics for fast worldwide delivery.

XY2CH13290H29 Cable Pull Switches by Schneider – Reliable Safety for Industrial Automation

The Cable Pull Switches XY2CH13290H29 by Schneider are high-performance Industrial Switches designed to enhance safety in Industrial Automation systems. These Cable Pull Switches provide emergency stop functionality over long conveyor belts or machinery, allowing operators to quickly shut down equipment in hazardous situations. Built with robust materials and engineered for harsh industrial environments, they ensure dependable operation and compliance with international safety standards.

In this blog, we will explore technical specifications, key features, applications, installation tips, and how to download the datasheet or order from Xon Electronics. These Electromechanical devices are critical for safeguarding workers and equipment in demanding industrial environments.

Technical Specifications of XY2CH13290H29

• Manufacturer: Schneider Electric

• Model: XY2CH13290H29

• Type: Cable Pull Switches

• Actuator: Latching emergency stop with manual reset

• Contact Configuration: 2 NC + 2 NO

• Maximum Cable Length: 50 meters

• Housing Material: Metal alloy for rugged use

• Protection Class: IP66/IP67 for dust and water resistance

• Operating Temperature: -25°C to +70°C

• Category: Electromechanical, Industrial Automation, Industrial Switches, Cable Pull Switches

These Industrial Switches provide reliable operation even in the most demanding industrial conditions.

Key Features of XY2CH13290H29

• Long cable reach (up to 50m) for extended emergency stop zones

• High ingress protection (IP66/IP67) against water and dust

• Latching mechanism for positive safety response

• Manual reset ensures safe restart after an emergency

• Rugged metal housing for industrial-grade durability

The XY2CH13290H29 Cable Pull Switches by Schneider offer superior safety and resilience, making them essential for modern Industrial Automation systems.

Applications of XY2CH13290H29

• Conveyor belt safety stop systems in manufacturing plants

• Packaging and material handling machinery

• Automotive assembly lines and robotics areas

• Mining and heavy equipment emergency stop controls

• Warehouses and distribution centers requiring long-span safety switches

These Cable Pull Switches are vital components for ensuring operator safety in diverse Electromechanical applications.

Installation and Configuration Overview

Installing the XY2CH13290H29 is straightforward:

• Mount the switch body securely to a fixed surface along the conveyor or machinery.

• Attach and tension the cable along the length of the protected area.

• Connect the 2 NC + 2 NO contacts to your safety relay or control system.

• Test the pull action to verify proper latching and reset operation.

These Industrial Switches are designed for quick integration and maximum reliability in safety-critical systems.

Use Case Scenario: Conveyor Belt Safety in a Packaging Plant

Scenario: A packaging facility required an effective safety solution to cover a long conveyor line.

Problem: Traditional emergency stop buttons didn’t provide continuous coverage, leaving gaps in worker protection.

Solution: The XY2CH13290H29 Cable Pull Switches by Schneider enabled workers to trigger an emergency stop anywhere along the 50-meter conveyor system.

Result: Enhanced worker safety, reduced downtime, and compliance with safety standards in Industrial Automation systems.

Download Datasheet for XY2CH13290H29

Looking for detailed technical drawings, wiring diagrams, and certifications?

Download XY2CH13290H29 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Schneider Cable Pull Switches with:

• 100% Authentic and Certified Products

• Global Shipping to USA, India, Australia, Europe & more

• OEM Pricing and Bulk Order Discounts

• Expert Technical Assistance for Product Integration

• Secure Ordering at www.xonelec.com

Choose Xon Electronics for trusted solutions in Electromechanical and Industrial Automation systems.

FAQs – XY2CH13290H29 Cable Pull Switches by Schneider

Q1. What is the maximum cable length supported?
Up to 50 meters for extended emergency stop zones.

Q2. Is it suitable for outdoor use?
Yes, it has an IP66/IP67 rating for water and dust resistance.

Q3. Does it have a manual reset feature?
Yes, ensuring safe restart after activation.

Q4. Can I integrate it with safety relays?
Absolutely, it works seamlessly with industrial safety systems.

Q5. Is global shipping available?
Yes, it’s available at www.xonelec.com with delivery to USA, India, Australia, Europe & more.

Conclusion

The XY2CH13290H29 Cable Pull Switches by Schneider provide a reliable, long-range emergency stop solution for Industrial Automation systems. Engineered for tough environments and designed for worker safety, these Industrial Switches are essential for any facility requiring robust safety mechanisms. Order today from Xon Electronics for fast worldwide delivery and technical support.

LSA1A Limit Switches by Honeywell – Precision Switching for Industrial Automation

The Limit Switches LSA1A by Honeywell are rugged and reliable Industrial Switches designed for use in a wide range of Industrial Automation systems. These compact Limit Switches provide precise position sensing, ensuring consistent operation in manufacturing lines, material handling systems, and safety mechanisms. Built with a durable metal housing, they deliver long-lasting performance in harsh environments where accuracy and reliability are critical.

In this blog, we’ll explore technical specifications, key features, application areas, wiring instructions, and how to download the datasheet or purchase from Xon Electronics. These Electromechanical components are essential for engineers building dependable control systems.

Technical Specifications of LSA1A

• Manufacturer: Honeywell

• Model: LSA1A

• Type: Limit Switches

• Actuator Type: Top plunger

• Contact Configuration: SPDT (Single Pole Double Throw)

• Operating Force: 0.75 lb (3.34N)

• Housing Material: Zinc die-cast

• Electrical Rating: 10A at 250V AC

• Operating Temperature: -25°C to +85°C

• Mounting Style: Panel mount

• Category: Electromechanical, Industrial Automation, Industrial Switches, Limit Switches

These Industrial Switches are designed to provide precise and repeatable switching for demanding automation tasks.

Key Features of LSA1A

• Rugged metal housing for durability in industrial settings

• SPDT contact configuration for flexible circuit integration

• Compact design for easy installation in tight spaces

• High electrical rating for controlling a variety of devices

• Resistant to shock, vibration, and environmental stress

The LSA1A Limit Switches by Honeywell combine precision and toughness, making them ideal for high-reliability Electromechanical applications.

Applications of LSA1A

• Conveyor systems and assembly lines in manufacturing

• Robotics and automated machinery position detection

• Elevator safety and limit control systems

• Packaging equipment requiring precise endpoint sensing

• Heavy-duty Industrial Automation environments

These Industrial Switches play a critical role in ensuring safety and accuracy in automated processes.

Wiring and Installation Overview

To install the LSA1A:

• Mount the switch securely using its panel mounting holes.

• Wire the SPDT contacts according to the system’s circuit design.

• Test the actuator for smooth operation and verify contact switching.

• Use proper cable protection to maintain environmental sealing.

These Limit Switches offer hassle-free integration into both new and retrofit systems.

Use Case Scenario: Conveyor Belt Position Control

Scenario: A factory required a robust Limit Switch for position detection on a high-speed conveyor system.

Problem: Previous Industrial Switches failed due to mechanical wear and dust exposure.

Solution: The LSA1A Limit Switches by Honeywell provided a durable housing and precise actuation for reliable performance.

Result: Reduced downtime, improved accuracy, and extended service life in a demanding Industrial Automation environment.

Download Datasheet for LSA1A

Looking for detailed mechanical drawings, electrical ratings, and certifications?

Download LSA1A Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Honeywell Limit Switches with:

• 100% Authentic and Certified Products

• Fast Shipping to USA, India, Australia, Europe & more

• Bulk Pricing and OEM Support for Industrial Buyers

• Expert Technical Assistance for Product Selection

• Secure Checkout at www.xonelec.com

Choose Xon Electronics for reliable Electromechanical solutions in Industrial Automation.

FAQs – LSA1A Limit Switches by Honeywell

Q1. What actuator type does the LSA1A have?
It features a top plunger actuator for precise position sensing.

Q2. Is it suitable for harsh environments?
Yes, the zinc die-cast housing provides excellent durability.

Q3. What is the electrical rating?
10A at 250V AC.

Q4. Can I use it in safety control systems?
Yes, it’s widely used in elevator and machinery safety applications.

Q5. Is it available globally?
Yes, you can buy it at www.xonelec.com with shipping to USA, India, Australia, Europe & more.

Conclusion

The LSA1A Limit Switches by Honeywell provide reliable and precise control for a variety of Industrial Automation systems. Engineered for durability and consistent performance, these Industrial Switches are a trusted choice for demanding applications. Order today from Xon Electronics for fast worldwide delivery and technical support.

RSP-1000-24 Switching Power Supplies by Mean Well – High-Efficiency Power for Demanding Applications

The Switching Power Supplies RSP-1000-24 by Mean Well are industrial-grade Power Supplies designed for high-performance and reliable operation. With a compact 1U low-profile design and an impressive 1000W output, these Switching Power Supplies provide a regulated 24V DC output for use in industrial automation, communication systems, and critical infrastructure applications.

In this blog, we’ll explore technical specifications, key features, practical applications, installation tips, and how to download the datasheet or purchase from Xon Electronics. If you need dependable Power Supplies, the RSP-1000-24 is the perfect choice.

Technical Specifications of RSP-1000-24

• Manufacturer: Mean Well

• Model: RSP-1000-24

• Type: Switching Power Supplies

• Output Voltage: 24V DC

• Output Current: 42A

• Output Power: 1008W

• Input Voltage: 90–264V AC (full range)

• Efficiency: Up to 90%

• Cooling: Built-in fan with speed control

• Protection: Overload, overvoltage, over-temperature, and short circuit

• Category: Power, Power Supplies, Switching Power Supplies

These Power Supplies combine high output with energy efficiency in a slim design for space-constrained applications.

Key Features of RSP-1000-24

• 24V DC regulated output with high current capacity (42A)

• Compact 1U profile for rack mounting and tight enclosures

• Built-in active PFC (Power Factor Correction)

• Intelligent fan speed control for efficient cooling and low noise

• Multiple protection features for enhanced system safety

The RSP-1000-24 Switching Power Supplies by Mean Well are engineered for maximum efficiency and long-term reliability in demanding Power environments.

Applications of RSP-1000-24

• Industrial automation equipment and control systems

• Telecommunication base stations and network infrastructure

• High-current LED lighting systems

• Renewable energy and battery charging stations

• Test and measurement systems requiring reliable Switching Power Supplies

These Power Supplies are suitable for mission-critical systems where stability and protection are essential.

Installation and Configuration Overview

To integrate the RSP-1000-24:

• Connect AC mains input (L/N terminals) and ensure proper grounding.

• Wire the 24V DC output to your load (V+/V- terminals) using appropriate gauge cables.

• Utilize the remote ON/OFF and voltage adjustment (Vadj) features as needed.

• Ensure adequate ventilation around the unit for optimal fan performance.

These Switching Power Supplies make installation straightforward for professional integrators.

Use Case Scenario: High-Current Industrial Automation

Scenario: An automation company required a compact Power Supply for a robotic assembly line needing high 24V current.

Problem: Existing supplies couldn’t handle the load or fit in the 1U rack design.

Solution: The RSP-1000-24 Switching Power Supplies by Mean Well delivered reliable 24V power at 1000W in a slim footprint.

Result: Improved system uptime, reduced heat buildup, and seamless integration.

This showcases the utility of high-performance Power Supplies in modern industries.

Download Datasheet for RSP-1000-24

Looking for detailed technical specifications, wiring diagrams, and certifications?

Download RSP-1000-24 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics provides genuine Mean Well Switching Power Supplies with:

• 100% Authentic Products with Global Certifications

• Worldwide Delivery to USA, India, Australia, Europe & more

• Bulk Order Discounts and OEM Support

• Expert Technical Guidance for Integration

• Secure Ordering at www.xonelec.com

Order now for high-efficiency Power Supplies you can trust.

FAQs – RSP-1000-24 Switching Power Supplies by Mean Well

Q1. What is the output power rating?
It delivers 1008W with 24V DC output at 42A.

Q2. Can it be mounted in a rack?
Yes, it has a 1U slim profile ideal for rack enclosures.

Q3. Is it suitable for industrial automation?
Yes, designed for automation and mission-critical systems.

Q4. Does it have PFC functionality?
Yes, it features active Power Factor Correction.

Q5. Can I purchase this globally?
Yes, it’s available at www.xonelec.com with shipping to USA, India, Australia, Europe & more.

Conclusion

The RSP-1000-24 Switching Power Supplies by Mean Well deliver powerful, efficient, and reliable 24V output for a wide range of applications. Whether for automation, telecom, or renewable energy, these Power Supplies provide consistent performance and protection. Order today from Xon Electronics for global delivery and technical support.

EKUH 180 T Electrical Enclosures by Fibox – Rugged Protection for Electrical Systems

The Electrical Enclosures EKUH 180 T by Fibox are high-quality, durable Enclosures designed to safeguard sensitive electrical and electronic components in a variety of industrial and commercial applications. These Standard Electrical Enclosures offer superior protection against dust, moisture, and mechanical impact, making them ideal for indoor and outdoor use.

In this blog, we’ll explore the technical specifications, key features, common applications, installation guidelines, and how to download the datasheet or order from Xon Electronics. For engineers and designers looking for reliable Electrical Enclosures, the EKUH 180 T is a smart choice.

Technical Specifications of EKUH 180 T

• Manufacturer: Fibox

• Model: EKUH 180 T

• Type: Standard Electrical Enclosures

• Dimensions: 180mm x 180mm x 130mm

• Material: High-impact resistant polycarbonate

• Protection Class: IP66 (dust-tight and water-resistant)

• Color: Grey RAL 7035

• Operating Temperature: -40°C to +80°C

• Mounting: Wall-mountable with integrated fixing points

• Category: Enclosures, Standard Electrical, Electrical Enclosures

These Electrical Enclosures provide robust protection for a wide range of electrical and electronic assemblies.

Key Features of EKUH 180 T

• High-impact polycarbonate housing for enhanced durability

• IP66 rated for dust and water ingress protection

• UV-resistant material suitable for outdoor installations

• Transparent cover for easy visual inspection of components

• Pre-molded mounting points simplify installation

The EKUH 180 T Electrical Enclosures by Fibox are ideal for protecting critical electrical systems in harsh environments.

Applications of EKUH 180 T

• Industrial control panels and automation systems

• Outdoor lighting and power distribution boxes

• Telecommunication and networking installations

• Renewable energy system junction boxes

• Marine and offshore Electrical Enclosures applications

These Standard Electrical Enclosures are designed for use in demanding environments where safety and durability are essential.

Installation and Configuration Overview

Installing the EKUH 180 T is simple:

• Mount the enclosure using the pre-molded fixing points.

• Place your electrical components inside and secure them to the internal mounting plate.

• Seal the transparent cover tightly to ensure IP66 protection.

• Apply cable glands as necessary for secure cable entry and exit.

These Fibox Enclosures make installation quick and efficient for electricians and system integrators.

Use Case Scenario: Outdoor Power Distribution Box

Scenario: A solar energy company needed a weatherproof Electrical Enclosure for housing control electronics in an outdoor solar panel array.

Problem: Standard enclosures failed due to UV exposure and water ingress.

Solution: The EKUH 180 T Electrical Enclosures by Fibox offered UV resistance and IP66 sealing for superior protection.

Result: Improved reliability, reduced maintenance costs, and a longer operational lifespan of critical equipment.

This demonstrates how Standard Electrical Enclosures are crucial in renewable energy systems.

Download Datasheet for EKUH 180 T

Looking for dimensions, certifications, and detailed specifications?

Download EKUH 180 T Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics provides genuine Fibox Electrical Enclosures with:

• 100% Authentic EKUH 180 T Products

• Worldwide Shipping to USA, India, Australia, Europe & more

• OEM Discounts and Bulk Order Support

• Expert Technical Assistance for Selection & Integration

• Safe and Secure Ordering at www.xonelec.com

Choose Xon Electronics for trusted solutions in Standard Electrical and industrial enclosure systems.

FAQs – EKUH 180 T Electrical Enclosures by Fibox

Q1. What is the protection rating of EKUH 180 T?
It is rated IP66 for dust and water protection.

Q2. Can it be used outdoors?
Yes, it is UV-resistant and suitable for outdoor installations.

Q3. What material is it made of?
High-impact polycarbonate for enhanced durability.

Q4. Is the cover transparent?
Yes, it has a transparent cover for visual inspections.

Q5. Can I purchase this globally?
Yes, available at www.xonelec.com with shipping to USA, India, Australia, Europe & more.

Conclusion

The EKUH 180 T Electrical Enclosures by Fibox provide rugged, weatherproof protection for your electrical and electronic systems. Perfect for industrial, commercial, and renewable energy applications, these Enclosures ensure long-lasting performance. Order today from Xon Electronics for fast global delivery and technical support.

DIGIFLEX 4000A 350MM Clamp Multimeters & Accessories by Chauvin Arnoux – Flexible, Accurate Measurement for High Currents

The Clamp Multimeters & Accessories DIGIFLEX 4000A 350MM by Chauvin Arnoux are advanced current measurement tools designed for professionals in the Test & Measurement industry. This flexible Rogowski coil clamp meter is capable of measuring AC currents up to 4000A with precision and ease. Featuring a 350mm coil diameter, it provides versatility in accessing tight spaces and around large conductors, making it ideal for industrial and power distribution applications.

In this blog, we’ll explore the technical specifications, key features, application areas, setup instructions, and how to download the datasheet or order from Xon Electronics. These Clamp Multimeters & Accessories are an essential part of any engineer’s toolkit.

Technical Specifications of DIGIFLEX 4000A 350MM

• Manufacturer: Chauvin Arnoux

• Model: DIGIFLEX 4000A 350MM

• Type: Clamp Multimeters & Accessories

• Measurement Range: AC current up to 4000A

• Coil Length: 350mm flexible Rogowski coil

• Output: 1mV/A AC voltage proportional to measured current

• Accuracy: ±1% of reading

• Frequency Response: 10Hz to 10kHz

• Power Supply: 2x AA batteries

• Category: Test & Measurement, Multimeters & Voltmeters, Clamp Multimeters & Accessories

This unit is designed for professionals requiring reliable and non-intrusive high-current measurements.

Key Features of DIGIFLEX 4000A 350MM

• Flexible Rogowski coil design for easy placement in tight spaces

• Measures high AC currents up to 4000A with excellent accuracy

• Wide frequency response suitable for various electrical systems

• Lightweight and portable for field use

• Compatible with standard Multimeters & Voltmeters for enhanced functionality

The DIGIFLEX 4000A 350MM Clamp Multimeters & Accessories by Chauvin Arnoux are ideal for engineers and electricians performing advanced Test & Measurement tasks.

Applications of DIGIFLEX 4000A 350MM

• Electrical maintenance and troubleshooting in industrial systems

• Power distribution and transformer current measurements

• Renewable energy system analysis (solar, wind)

• HVAC system diagnostics and energy audits

• High-current monitoring in automotive and marine applications

These Clamp Multimeters & Accessories are essential for accurate and safe high-current measurements in diverse environments.

Installation and Usage Overview

Using the DIGIFLEX 4000A 350MM is simple:

• Wrap the flexible Rogowski coil around the conductor to measure.

• Connect the output leads to a compatible multimeter or oscilloscope.

• Power on the device and select the appropriate range on your measuring instrument.

• Ensure the coil is properly closed and centered for accurate readings.

These Multimeters & Voltmeters accessories are designed to simplify current measurement in even the most challenging spaces.

Use Case Scenario: Power Distribution System Monitoring

Scenario: A utility company needed a tool to measure high AC currents in crowded distribution panels.

Problem: Traditional clamp meters couldn’t access tightly packed conductors.

Solution: The DIGIFLEX 4000A 350MM Clamp Multimeters & Accessories by Chauvin Arnoux provided a flexible coil design to measure currents safely and accurately.

Result: Faster diagnostics, improved safety, and reliable measurements even in constrained spaces.

This demonstrates how these Test & Measurement tools empower technicians in critical field applications.

Download Datasheet for DIGIFLEX 4000A 350MM

Looking for detailed specifications, wiring diagrams, and certifications?

Download DIGIFLEX 4000A 350MM Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Chauvin Arnoux Clamp Multimeters & Accessories, providing:

• 100% Authentic Products with Global Certifications

• Worldwide Delivery to USA, India, Australia, Europe & more

• OEM Discounts and Bulk Order Options

• Technical Support for Product Integration

• Secure Checkout at www.xonelec.com

Choose Xon Electronics for all your Test & Measurement needs.

FAQs – DIGIFLEX 4000A 350MM Clamp Multimeters & Accessories

Q1. What is the maximum current it can measure?
Up to 4000A AC.

Q2. Can it fit around large busbars?
Yes, thanks to its 350mm flexible Rogowski coil.

Q3. Is it compatible with standard multimeters?
Yes, it outputs a voltage proportional to current for use with Multimeters & Voltmeters.

Q4. Does it require an external power source?
No, it runs on 2x AA batteries for portability.

Q5. Can I purchase this worldwide?
Yes, available at www.xonelec.com with shipping to USA, India, Australia, Europe & more.

Conclusion

The DIGIFLEX 4000A 350MM Clamp Multimeters & Accessories by Chauvin Arnoux provide unmatched flexibility, accuracy, and convenience for high-current measurements. Perfect for industrial, automotive, and utility applications, these Test & Measurement tools are trusted by professionals globally. Order now from Xon Electronics for fast worldwide delivery and expert support.

SDR-960-48 DIN Rail Power Supplies by Mean Well – High-Efficiency Power for Industrial Systems

The DIN Rail Power Supplies SDR-960-48 by Mean Well are high-performance Power Supplies designed to deliver 960W of reliable 48V DC output. With a slim form factor and high efficiency of up to 94%, these DIN Rail Power Supplies are ideal for industrial automation, control panels, and critical equipment requiring stable Power delivery. Featuring wide input ranges, advanced protection features, and compliance with international standards, they are the perfect choice for demanding applications.

In this blog, we will explore the technical specifications, key features, application areas, installation guidance, and how to download the datasheet or order from Xon Electronics. These Power Supplies are built to meet the challenges of modern industrial environments.

Technical Specifications of SDR-960-48

• Manufacturer: Mean Well

• Model: SDR-960-48

• Type: DIN Rail Power Supplies

• Output Voltage: 48V DC

• Output Current: 20A

• Output Power: 960W

• Input Voltage Range: 180–264V AC (Full Range)

• Efficiency: Up to 94%

• Mounting: DIN Rail TS-35/7.5 or 15

• Protection: Overload, overvoltage, short circuit, and over-temperature

• Category: Power, Power Supplies, DIN Rail Power Supplies

With its compact design and high reliability, this unit is tailored for applications requiring consistent and efficient Power.

Key Features of SDR-960-48

• High efficiency up to 94% reduces energy consumption

• Slim 110mm width for space-saving DIN rail mounting

• Built-in active PFC function (Power Factor Correction)

• Wide operating temperature range (-25°C to +70°C)

• Advanced protection: Overload, overvoltage, and over-temperature

The SDR-960-48 DIN Rail Power Supplies by Mean Well are a perfect match for systems demanding high efficiency and robust Power Supplies performance.

Applications of SDR-960-48

• Industrial automation and process control

• Factory equipment and robotics systems

• Telecommunication and networking infrastructure

• Renewable energy systems (solar, wind)

• Critical devices requiring stable DIN Rail Power Supplies

These Power Supplies are engineered for high-reliability environments where uninterrupted Power is vital.

Installation and Wiring Overview

To install the SDR-960-48:

• Mount the unit securely on the DIN rail TS-35 in your control panel.

• Connect the AC input (L/N terminals) and ensure proper grounding (PE).

• Wire the 48V DC output (V+/V-) to your load with appropriate gauge cables.

• Verify output voltage and current to match your system’s specifications.

The DIN Rail Power Supplies design simplifies installation and maintenance in industrial cabinets.

Use Case Scenario: Powering Automated Factory Systems

Scenario: An industrial automation firm required a reliable Power Supply for its robotic control panels.

Problem: Previous DIN Rail Power Supplies failed under high-load conditions and lacked energy efficiency.

Solution: The SDR-960-48 DIN Rail Power Supplies by Mean Well provided high efficiency, advanced protection, and a slim form factor for space-constrained panels.

Result: Improved system uptime, reduced energy costs, and enhanced panel design flexibility.

This use case demonstrates the value of Mean Well’s Power Supplies in modern industrial ecosystems.

Download Datasheet for SDR-960-48

Looking for dimensions, wiring diagrams, and certifications?

Download SDR-960-48 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Mean Well DIN Rail Power Supplies with:

• 100% Original Products with Global Certifications

• Worldwide Delivery to USA, India, Australia, Europe & more

• OEM and Bulk Order Pricing for Industrial Buyers

• Technical Support for Integration and Selection

• Secure Checkout at www.xonelec.com

Shop trusted Power Supplies for mission-critical applications.

FAQs – SDR-960-48 DIN Rail Power Supplies by Mean Well

Q1. What is the output voltage and power?
48V DC output at 960W total.

Q2. Can it operate in high-temperature environments?
Yes, it supports up to +70°C with derating.

Q3. Is it suitable for industrial control systems?
Absolutely—designed for automation and critical applications.

Q4. What protections does it offer?
Overload, overvoltage, short circuit, and thermal protection.

Q5. Can I buy this globally?
Yes, available at www.xonelec.com with shipping to USA, India, Australia, Europe & more.

Conclusion

The SDR-960-48 DIN Rail Power Supplies by Mean Well combine high efficiency, robust protection, and space-saving design to deliver reliable Power for industrial systems. Ideal for automation, robotics, and renewable energy, these DIN Rail Power Supplies ensure stability and performance. Order today from Xon Electronics for global delivery and expert support.

SWPR-001T-P025 Terminals by JST – High-Reliability Crimp Contacts for Compact Wiring Systems

The Terminals SWPR-001T-P025 by JST are precision-engineered crimp terminals designed for secure and efficient wire-to-board or wire-to-wire connections in compact electronic assemblies. These tin-plated contacts are part of JST’s renowned SWPR series, offering exceptional conductivity, reliable mating, and excellent retention force in confined spaces. Built for performance in consumer electronics, automotive systems, and industrial devices, the Terminals by JST ensure long-term connectivity with minimal insertion resistance and superior durability.

In this blog, we’ll explore the technical specifications, key features, real-world applications, installation overview, and why you should choose Xon Electronics as your global supplier.

Technical Specifications of SWPR-001T-P025

• Manufacturer: JST

• Part Number: SWPR-001T-P025

• Series: SWPR

• Contact Type: Crimp Terminal

• Wire Gauge Range: 32 to 28 AWG

• Contact Plating: Tin over copper alloy

• Mounting Type: Free-hanging (Crimped to Wire)

• Rated Current: Up to 1A

• Operating Temperature: -25°C to +85°C

• Category: Connectors, Terminals by JST

These crimp terminals are designed for precision electronic systems where space, reliability, and electrical contact quality are critical.

Key Features of SWPR-001T-P025 Terminal

• Ultra-Compact Design – Ideal for high-density harnesses and miniature connectors

• Reliable Crimp Contact – Ensures stable electrical and mechanical connection

• Tin-Plated Finish – Enhances corrosion resistance and conductivity

• High Retention Strength – Maintains secure fit in connector housing

• RoHS Compliant – Environmentally friendly and globally approved

With these advantages, the SWPR-001T-P025 Terminals by JST are a leading solution for signal, data, and low-power connections in space-constrained devices.

Applications of Terminals by JST

The Terminals by JST are widely used in electronics where miniaturization and dependable connectivity are required:

• Consumer Electronics (Headphones, Cameras, Wearables)

• Automotive Control Units and Dashboards

• Battery Packs and Smart Chargers

• Medical Monitoring Devices

• Embedded and IoT Systems

• Robotics and Control Boards

The SWPR-001T-P025 Terminals by JST provide consistent performance in both static and dynamic environments, supporting signal integrity even in mobile and high-vibration systems.

Crimping and Assembly Overview

Proper installation of these terminals ensures optimal connection quality:

1. Strip insulation from wire (28–32 AWG)

2. Insert wire into crimp barrel of terminal

3. Use a JST-approved crimping tool for accurate crimp pressure

4. Insert the terminal into the appropriate JST housing

5. Confirm retention and continuity via pull test or inspection

These steps guarantee low-resistance contact and long-lasting durability in assembled harnesses.

Use Case Scenario: Wire Harness in Compact IoT Sensor

Scenario: A startup developing compact IoT sensors needed micro crimp terminals for board-to-wire connections without risking signal drop.

Problem: Previous contacts lacked insertion precision and loosened over time.

Solution: The SWPR-001T-P025 Terminals by JST delivered secure crimping, excellent contact retention, and low-profile design.

Result: Improved product reliability, reduced maintenance, and successful high-volume integration.

This practical example shows why engineers trust Terminals by JST in mission-critical electronic assemblies.

Download Datasheet for SWPR-001T-P025

Need complete mechanical drawings, crimp specifications, or compatibility info?

[Download SWPR-001T-P025 Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

Xon Electronics provides a wide selection of genuine Terminals by JST, including the SWPR-001T-P025, with:

• 100% Authentic JST Components
• Global Shipping – USA, India, Australia, Europe & more
• Bulk Availability for OEMs and Harness Manufacturers
• Technical Support for Assembly and Compatibility
• Fast, Safe, and Easy Online Ordering

Partner with Xon Electronics for high-quality connectivity solutions from JST.

Conclusion

The SWPR-001T-P025 Terminals by JST are compact, reliable, and precision-engineered for modern electronic assemblies. From consumer electronics to automotive control systems, these crimp contacts offer secure mating, minimal resistance, and superior long-term performance. Now available at Xon Electronics with global delivery to the USA, India, Australia, Europe, and other countries.

FAQs – SWPR-001T-P025 Terminals by JST

Q1. What wire gauge does this terminal support?
It supports 32 to 28 AWG wires.

Q2. Is it compatible with JST housings?
Yes, it fits into SWPR series connector housings.

Q3. What is the current rating?
Rated up to 1A depending on the application and gauge.

Q4. Can it be used in automotive or portable electronics?
Yes, it’s ideal for compact, high-reliability connections in such systems.

Q5. Where can I buy it globally?
You can purchase it at www.xonelec.com with shipping to USA, India, Australia, Europe, and more.

GRM21BR61E106KA73L Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata – Compact 10µF Capacitor for High-Reliability Designs

The Multilayer Ceramic Capacitors MLCC - SMD/SMT GRM21BR61E106KA73L by Murata are compact, surface-mount capacitors designed for high-performance decoupling and filtering in electronic circuits. Engineered with Murata’s trusted Class II X5R dielectric material, this 10µF, 25V capacitor delivers excellent capacitance stability, low ESR, and long-term reliability in a space-saving 0805 package. The Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata are widely used in smartphones, IoT modules, power supplies, and automotive electronics due to their high capacitance-to-size ratio and consistent electrical performance.

In this blog, we’ll cover the technical details, top features, applications, soldering tips, and why Xon Electronics is your ideal global supplier.

Technical Specifications of GRM21BR61E106KA73L

• Manufacturer: Murata Electronics

• Part Number: GRM21BR61E106KA73L

• Capacitance: 10 µF

• Voltage Rating: 25V DC

• Dielectric: X5R (Class II)

• Tolerance: ±10%

• Mounting Type: Surface Mount (SMD/SMT)

• Package Size: 0805 (2.0 mm × 1.25 mm)

• Operating Temperature: -55°C to +85°C

• RoHS: Compliant

• Category: Passive Components, Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata

This capacitor balances compact size with high capacitance and stable performance, making it ideal for both analog and digital circuit designs.

Key Features of GRM21BR61E106KA73L Capacitor

• 10µF Capacitance in 0805 Package – High density for compact PCBs

• X5R Dielectric – Stable performance under varying voltage and temperature

• Low ESR & ESL – Suitable for high-frequency decoupling and filtering

• ±10% Tolerance – Reliable for general-purpose and precision applications

• Murata Reliability – Industry-trusted for quality and consistency

With these features, the GRM21BR61E106KA73L Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata are ideal for advanced, space-efficient designs requiring stable capacitance.

Applications of Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata

The Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata are used in a broad range of industries and electronic devices:

• Mobile Phones and Wearables

• Automotive ECUs and Infotainment Systems

• Industrial Automation Boards

• High-Frequency Power Supplies

• Medical Instruments

• Networking Equipment and Routers

Because of their compact footprint and high capacitance, the GRM21BR61E106KA73L Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata are integral to modern, high-density electronic circuits.

Soldering and Mounting Overview

GRM21BR61E106KA73L capacitors are compatible with standard SMT processes:

1. Apply solder paste to the PCB using a stencil

2. Place components using automated pick-and-place

3. Reflow solder using a thermal profile that suits X5R ceramics

4. Post-process inspection for correct placement and solder quality

These MLCCs are built to withstand thermal cycling and vibration, ensuring long-term reliability in demanding applications.

Use Case Scenario: Decoupling Capacitor in Automotive Microcontroller Board

Scenario: An automotive electronics manufacturer needed compact, thermally stable capacitors to decouple high-speed microcontrollers.

Problem: Conventional capacitors exhibited capacitance drift and poor thermal response.

Solution: The GRM21BR61E106KA73L Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata delivered stable capacitance and reliable SMT soldering in automotive-grade conditions.

Result: Improved circuit performance, smaller board size, and better EMI suppression.

This real-world success illustrates how Murata MLCCs enhance both design and functional reliability.

Download Datasheet for GRM21BR61E106KA73L

Need footprint details, electrical curves, or thermal characteristics?

[Download GRM21BR61E106KA73L Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

At Xon Electronics, you’ll find original Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata, including GRM21BR61E106KA73L, with:

• 100% Authentic Murata Products
• Worldwide Shipping – USA, India, Australia, Europe & more
• Volume Discounts for OEMs and Assembly Lines
• Engineering Support for Selection and Compatibility
• Fast, Safe, and Secure Checkout

Rely on Xon Electronics for dependable Murata MLCCs that meet global industry standards.

Conclusion

The GRM21BR61E106KA73L Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata provide excellent electrical performance, thermal stability, and high capacitance in a compact form factor. Suitable for power decoupling, noise filtering, and signal smoothing, these MLCCs are ideal for a wide range of demanding electronic applications. Now available at Xon Electronics with global shipping to the USA, India, Australia, Europe, and other countries.

FAQs – GRM21BR61E106KA73L Multilayer Ceramic Capacitors MLCC - SMD/SMT by Murata

Q1. What is the capacitance of this MLCC?
It is rated at 10 µF.

Q2. What is the dielectric material used?
It uses X5R Class II dielectric.

Q3. What package size does it come in?
It comes in an 0805 surface-mount package.

Q4. Is it suitable for automotive or high-reliability systems?
Yes, it is widely used in automotive, medical, and industrial applications.

Q5. Where can I buy it globally?
At www.xonelec.com, with shipping to USA, India, Australia, Europe, and many other countries.

M6/BN124 DIN439 Screws & Fasteners by Bossard – Precision Hex Jam Nuts for Industrial Assembly

The Screws & Fasteners M6/BN124 DIN439 by Bossard are precision-engineered hex jam nuts built for mechanical locking in compact or low-clearance environments. Designed according to DIN439 standards, these M6 low-profile fasteners are ideal for pre-assembly locking, vibration resistance, and secure clamping without full-size nuts. The Screws & Fasteners by Bossard are renowned for their exceptional strength, precision threading, and long-term reliability—making them a go-to choice for engineers in global industries.

In this blog, we’ll walk through the key specifications, features, practical uses, installation guidelines, and reasons to buy from Xon Electronics.

Technical Specifications of M6/BN124 DIN439

• Manufacturer: Bossard

• Part Number: M6/BN124

• Type: Hex Jam Nut (DIN439)

• Thread Size: M6 x 1.0

• Height: ~3 mm (low profile)

• Material: Carbon Steel

• Finish: Zinc-Plated (corrosion-resistant)

• Drive Style: Hex

• Compliance: DIN439 Form B

• Category: Mechanical Hardware, Screws & Fasteners by Bossard

Engineered to ensure thread integrity and mechanical locking in confined spaces, this jam nut is ideal for dual-nut locking configurations.

Key Features of M6/BN124 Screws & Fasteners

• DIN439 Standardized Form – Ensures global compatibility and consistent fit

• Low-Profile Hex Design – Perfect for space-constrained applications

• Zinc-Plated Carbon Steel – Offers high strength and corrosion resistance

• Precision Threading – Promotes secure engagement and resistance to loosening

• Ideal for Locking & Preloading – Often used as a jam nut in dual-nut setups

With these benefits, the M6/BN124 DIN439 Screws & Fasteners by Bossard meet the highest demands of industrial-grade fastening.

Applications of Screws & Fasteners by Bossard

The Screws & Fasteners by Bossard are widely applied in high-vibration, space-restricted, and pre-assembled environments:

• Machinery and Equipment Assembly

• Automotive and Engine Systems

• Renewable Energy Infrastructure

• Electrical Panels and Enclosures

• Construction Fixtures and Industrial Frames

• Robotics and Motion Control Assemblies

Thanks to their standardized thread profile and low-profile hex form, the Screws & Fasteners by Bossard are essential in secure and stable fastening systems.

Installation and Assembly Overview

The M6/BN124 DIN439 jam nut is designed for simple and effective mechanical locking:

1. Thread the standard nut onto the bolt to secure the part

2. Add the DIN439 jam nut and tighten against the first nut

3. Use two wrenches to counter-lock the nuts (tighten one against the other)

4. Verify torque and mechanical holding force

This dual-nut locking method helps prevent loosening due to vibration or thermal expansion.

Use Case Scenario: Vibration-Resistant Mounting in Industrial Motor Base

Scenario: A mechanical design team needed a slim fastening solution for mounting electric motors onto a frame without space for full-height nuts.

Problem: Standard M6 nuts caused clearance issues and loosened over time from vibration.

Solution: The M6/BN124 DIN439 Screws & Fasteners by Bossard offered a low-profile, secure jam nut option that stayed tight under dynamic conditions.

Result: Improved reliability, eliminated fastener failures, and maintained structural integrity under vibration.

This example proves why Bossard’s fasteners are trusted across precision engineering tasks.

Download Datasheet for M6/BN124 DIN439

Need full specs, material certificates, or dimensional drawings?

[Download M6/BN124 DIN439 Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

At Xon Electronics, we stock a wide range of Screws & Fasteners by Bossard, including the M6/BN124 DIN439 hex jam nut, with:

• 100% Genuine Bossard Mechanical Components
• Global Delivery – USA, India, Australia, Europe & more
• Bulk Supply Options for OEMs and Assembly Lines
• Engineering Support for Fastener Selection
• Fast, Secure Online Ordering

Make your assembly more secure with high-performance fastening from Xon Electronics.

Conclusion

The M6/BN124 DIN439 Screws & Fasteners by Bossard offer a low-profile, vibration-resistant solution for compact and reliable mechanical assemblies. With DIN-compliant threading, durable zinc plating, and trusted engineering, these hex jam nuts are built for demanding industrial environments. Available now at Xon Electronics with worldwide shipping to the USA, India, Australia, Europe, and beyond.

FAQs – M6/BN124 DIN439 Screws & Fasteners by Bossard

Q1. What is the primary use of a DIN439 jam nut?
It is used as a lock nut against a standard nut to resist loosening from vibration.

Q2. Is this nut full height?
No, it is a low-profile nut approximately 3 mm in height.

Q3. What material is it made from?
Carbon steel with zinc plating for corrosion resistance.

Q4. Can it be used in high-vibration environments?
Yes, it’s ideal for such conditions when used as a jam nut.

Q5. Where can I purchase it globally?
At www.xonelec.com, with shipping to USA, India, Australia, Europe, and other countries.