MF1/4W-100K±1%-ST26 Thick Film Resistors – Through Hole by Anhui VICO

The Thick Film Resistors - Through Hole MF1/4W-100K±1%-ST26  by Anhui VICO is a precision Thick Film Resistor – Through Hole designed for stable performance, tight tolerance, and long-term reliability in general-purpose and industrial electronics. Belonging to the Passive Components, Resistors, Film Resistors, Thick Film Resistors - Through Hole category, this resistor provides accurate 100KO resistance with ±1% tolerance and dependable 1/4W power handling.

Engineers and procurement teams can source genuine components from www.xonelec.com, x-on electronics, and xon electronics for fast global availability and trusted supply.

Technical Specifications of MF1/4W-100K±1%-ST26

Manufacturer: Anhui VICO
Part Number: MF1/4W-100K±1%-ST26
Category: Passive Components, Resistors, Film Resistors, Thick Film Resistors - Through Hole
Resistance Value: 100KO
Tolerance: ±1%
Power Rating: 0.25W (1/4W)
Mounting Type: Through Hole
Technology: Thick Film
Temperature Coefficient: Stable low drift
Construction: Axial leaded

Download datasheet-MF1/4W-100K±1%-ST26 Datasheet

This device ensures accurate signal control and dependable current limiting across a wide range of circuits.

Key Features of MF1/4W-100K±1%-ST26

• Precision ±1% tolerance for accurate circuits
• Stable thick film technology for long life
• Low noise characteristics
• Compact axial design for easy PCB mounting
• Consistent thermal performance
• Cost-effective solution for bulk production

As part of Passive Components, Resistors, Film Resistors, Thick Film Resistors - Through Hole, it offers dependable operation in both consumer and industrial designs.

Applications of MF1/4W-100K±1%-ST26

This MF1/4W-100K±1%-ST26 Thick Film Resistor – Through Hole is widely used in:

• Power supplies
• Signal conditioning circuits
• Voltage dividers
• LED drivers
• Embedded control systems
• Home appliances
• Industrial electronics
• Communication devices

Its through-hole format provides strong mechanical bonding and easy hand or wave soldering.

Electrical Performance & Reliability

The MF1/4W-100K±1%-ST26 is engineered to deliver:

• Stable resistance over temperature variations
• Reliable current limiting
• Reduced drift over time
• Excellent load life
• Safe and consistent heat dissipation

These benefits make it ideal among Passive Components, Resistors, Film Resistors, Thick Film Resistors - Through Hole for long-term circuit stability.

Wiring and Installation Overview

Typical mounting method:

Insert axial leads into PCB holes
Solder leads securely
Trim excess lead length

The compact body and standard lead spacing simplify integration into prototypes and mass production boards.

Why Buy from www.xonelec.com?

x-on electronics and xon electronics offer:

• Genuine electronic components
• Competitive pricing
• Bulk stock availability
• Worldwide shipping
• Fast order processing
• Professional customer support

Whether you need small quantities or large-scale procurement, sourcing is simple and reliable.

Conclusion

The MF1/4W-100K±1%-ST26 Thick Film Resistor – Through Hole combines precision, durability, and affordability for modern electronic designs. With 100KO accuracy, 1/4W capability, and robust thick film construction, it remains a dependable solution across Passive Components, Resistors, Film Resistors, Thick Film Resistors - Through Hole applications.

FAQs – MF1/4W-100K±1%-ST26

Q1. What is the resistance value?
100KO.

Q2. What tolerance does it offer?
±1% precision.

Q3. Is this through-hole or SMD?
Through-hole axial mounting.

Q4. What power rating is supported?
0.25W (1/4W).

Q5. Where can I purchase it?
From www.xonelec.com with global shipping.

CRGP1210F68R Thick Film Resistors - SMD by TE Connectivity

The CRGP1210F68R from TE Connectivity is a high-reliability surface mount resistor designed for precision resistance control in modern electronic circuits. It is widely used across Passive Components, Resistors, Film Resistors, and Thick Film Resistors - SMD based circuit designs for industrial, automotive, and consumer electronics.

Available from https://www.xonelec.com/, x-on electronics, and xon electronics, this resistor is trusted for stable performance in Passive Components and Resistors applications requiring high durability and accuracy.

Technical Specifications of CRGP1210F68R

Product Overview

Manufacturer: TE Connectivity
Part Number: CRGP1210F68R
Resistance Value: 68 Ohms
Resistor Type: Thick Film Chip Resistor
Package Size: 1210 SMD
Tolerance: ±1% (Typical F Tolerance)
Power Rating: Typically 0.5W (1210 Package Range)
Mounting Type: Surface Mount

This device is optimized for Passive Components, Resistors, Film Resistors, and Thick Film Resistors - SMD circuit applications requiring stable resistance and thermal reliability.

Key Features of CRGP1210F68R Resistor

Performance & Electrical Advantages

• Stable Thick Film Resistance Technology

• High Reliability SMD Construction

• Excellent Temperature Stability

• Compact 1210 Package for Space Efficient PCB Layout

• Long Operational Life

These features make it suitable for advanced Passive Components and Resistors circuit designs using Film Resistors and Thick Film Resistors - SMD technologies.

Applications of CRGP1210F68R

Common Industry Applications

• Power Supply Circuits

• Signal Conditioning Circuits

• Automotive Electronics

• Industrial Control Systems

• Consumer Electronics

• Telecom Equipment

• LED Driver Circuits

Design engineers prefer Thick Film Resistors - SMD for reliable resistance control in Passive Components and Resistors system designs.

Products are globally available through https://www.xonelec.com/, x-on electronics, and xon electronics for sourcing professional Passive Components, Resistors, and Film Resistors components.

Working Principle – Thick Film Resistor Technology

How Thick Film Resistors Work

Resistive Film Layer ? Controls Current Flow
Applied Voltage ? Produces Stable Resistance
Thermal Stability ? Maintains Accuracy

This makes Film Resistors and Thick Film Resistors - SMD critical parts in Passive Components and Resistors based electronic circuits.

Use Case Scenario – Power Supply Regulation Circuit

Real World Implementation

Scenario:
Industrial power module required stable current limiting resistor.

Problem:
Previous resistors failed under thermal stress.

Solution:
CRGP1210F68R provided stable operation using Film Resistors and Thick Film Resistors - SMD technology.

Result:
Improved reliability using high quality Passive Components and Resistors solutions.

Download Datasheet for CRGP1210F68R

Looking for full electrical characteristics, temperature curves, or packaging data?

Download CRGP1210F68R Datasheet from Xon Electronics

CRGP1210F68R Datasheet.

Why Buy from Xon Electronics?

Supplier Advantages

• Genuine TE Connectivity Components

• Global Distribution Support

• OEM Bulk Pricing Options

• Technical Product Support

• Secure Supply Chain

Order from https://www.xonelec.com/ for trusted Passive Components, Resistors, Film Resistors, and Thick Film Resistors - SMD sourcing.

Conclusion

The CRGP1210F68R resistor from TE Connectivity is a reliable solution for modern Passive Components, Resistors, Film Resistors, and Thick Film Resistors - SMD circuit applications. Its stable thick film technology and compact SMD size make it ideal for industrial and commercial electronics.

FAQs – CRGP1210F68R Thick Film Resistor

What resistance value is CRGP1210F68R?

It is a 68 Ohm thick film SMD resistor.

Where is this resistor commonly used?

Power supplies, signal circuits, and industrial electronics.

Is it suitable for high reliability applications?

Yes, it is designed for long term stable operation.

Which category does it belong to?

Passive Components, Resistors, Film Resistors, and Thick Film Resistors - SMD.

08-50-0113 Headers & Wire Housings by Molex

The 08-50-0113 from Molex is a high-quality interconnect solution designed for reliable signal and power connections in electronic systems. It is widely used across Connectors and Headers & Wire Housings applications in industrial, automotive, and consumer electronics.

Available from https://www.xonelec.com/, x-on electronics, and xon electronics, this component is trusted by engineers working with Connectors and Headers & Wire Housings for secure and long-lasting electrical connections.

Technical Specifications of 08-50-0113

Product Overview

Manufacturer: Molex
Part Number: 08-50-0113
Product Type: Crimp Terminal / Housing Contact Component
Series: KK / Interconnect Series (Typical Usage Category)
Mounting Type: Wire Mount / Crimp Connection
Contact Material: High Conductivity Copper Alloy
Plating: Tin / Gold (Depending on Configuration)
Application Type: Signal and Power Connection

This component is commonly used in Connectors and Headers & Wire Housings assemblies for reliable board-to-wire connectivity.

Key Features of 08-50-0113

Performance & Mechanical Advantages

• High Reliability Contact Design

• Strong Mechanical Retention

• Excellent Electrical Conductivity

• Compatible with Multiple Molex Housing Systems

• Designed for Long Lifecycle Interconnect Performance

These features make it suitable for professional Connectors and Headers & Wire Housings system designs requiring durable electrical interconnections.

Applications of 08-50-0113

Common Industry Applications

• Industrial Control Systems

• Consumer Electronics

• Automotive Wiring Systems

• Home Appliances

• Power Distribution Assemblies

• PCB Wire Harness Connections

Design engineers prefer Headers & Wire Housings solutions in modern Connectors systems for stable signal and power transfer.

Products are globally available via https://www.xonelec.com/, x-on electronics, and xon electronics for sourcing professional Connectors and Headers & Wire Housings components.

Working Principle – Crimp Contact Connection

How Wire Housing Contacts Work

Wire Crimped ? Secure Mechanical Bond
Terminal Inserted ? Locked Into Housing
Housing Connected ? Stable Electrical Path

This method ensures long-term performance in Connectors and Headers & Wire Housings assemblies used in industrial electronics.

Use Case Scenario – Industrial Wire Harness Assembly

Real World Implementation

Scenario:
Industrial automation system required durable wire-to-board connection.

Problem:
Previous connector contacts loosened under vibration.

Solution:
08-50-0113 used in Headers & Wire Housings improved retention strength.

Result:
Improved system reliability using high-quality Connectors and Headers & Wire Housings technology.

Download Datasheet for 08-50-0113

Looking for full specifications, crimp data, or housing compatibility?

Download 08-50-0113 Datasheet from Xon Electronics 08-50-0113 Datasheet .

Why Buy from Xon Electronics?

Supplier Advantages

• Genuine Molex Connector Components

• Global Export and Distribution Support

• OEM Bulk Pricing Support

• Technical Product Assistance

• Secure Global Supply Chain

Order from https://www.xonelec.com/ for reliable Connectors and Headers & Wire Housings sourcing.

Conclusion

The 08-50-0113 by Molex is a reliable interconnect solution widely used in Connectors and Headers & Wire Housings applications. Its strong crimp design, reliable conductivity, and mechanical durability make it ideal for modern wiring and harness systems.

FAQs – 08-50-0113 Molex Connector Component

What type of component is 08-50-0113?

It is a crimp contact used in Headers & Wire Housings connector systems.

Where is it commonly used?

Industrial wiring, consumer electronics, and automotive harnesses.

Is it compatible with Molex housings?

Yes, it is designed for compatible Molex connector housing systems.

Which category does it belong to?

Connectors and Headers & Wire Housings.

CSD18563Q5A MOSFETs by Texas Instruments

The CSD18563Q5A MOSFET from Texas Instruments is a high-performance power transistor designed for efficient switching and power management applications. It is widely used in modern Semiconductors, Discrete Semiconductors, Transistors, and MOSFETs based circuit designs for industrial, automotive, and consumer electronics.

Available from https://www.xonelec.com/, x-on electronics, and xon electronics, this device is trusted for high efficiency power conversion and reliable Semiconductors performance in demanding applications.

Technical Specifications of CSD18563Q5A

Product Overview

Manufacturer: Texas Instruments
Part Number: CSD18563Q5A
Device Type: N-Channel Power MOSFET
Technology: NexFET Power MOSFET
Package: SON 5mm × 6mm
Drain-Source Voltage (Vds): 60V
Continuous Drain Current: High Current Capability
RDS(on): Ultra Low On Resistance
Mounting Type: Surface Mount

This device is optimized for Semiconductors, Discrete Semiconductors, Transistors, and MOSFETs power switching applications requiring high efficiency and low thermal loss.

Key Features of CSD18563Q5A MOSFET

Performance & Electrical Advantages

• Ultra Low RDS(on) for High Efficiency

• High Current Handling Capability

• Compact SON Package for High Density PCB Design

• Optimized Gate Charge Performance

• High Reliability Power Semiconductor Structure

These features make it ideal for advanced Semiconductors and Discrete Semiconductors product designs using Transistors and MOSFETs switching architectures.

Applications of CSD18563Q5A

Common Industry Applications

• DC-DC Converters

• Power Management Systems

• Motor Drive Circuits

• Industrial Power Supplies

• Battery Management Systems

• Automotive Electronics

• Server and Telecom Power Modules

Design engineers prefer MOSFETs based Transistors for efficient power switching in Semiconductors and Discrete Semiconductors system architectures.

Products are globally available through https://www.xonelec.com/, x-on electronics, and xon electronics for sourcing Semiconductors and Discrete Semiconductors components.

Working Principle – MOSFET Power Switching

How MOSFET Controls Power

Gate Voltage Applied ? Channel Conducts
Gate Voltage Removed ? Channel Stops Conducting

This switching method makes MOSFETs critical components in Semiconductors, Discrete Semiconductors, and Transistors based high efficiency power circuits.

Use Case Scenario – DC Power Converter

Real World Implementation

Scenario:
Industrial DC power module required high efficiency switching device.

Problem:
Higher heat generation using older transistor technologies.

Solution:
CSD18563Q5A provided low RDS(on) and efficient switching using MOSFETs and Transistors technology.

Result:
Improved thermal performance and reduced power loss using Semiconductors and Discrete Semiconductors solutions.

Download Datasheet for CSD18563Q5A

Looking for full specifications, switching characteristics, or thermal data?

Download CSD18563Q5A Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Supplier Advantages

• Genuine Texas Instruments Semiconductor Components

• Global Export and Supply Support

• Bulk Pricing for OEM Customers

• Technical Component Assistance

• Secure Global Distribution

Order from https://www.xonelec.com/ for reliable Semiconductors, Discrete Semiconductors, Transistors, and MOSFETs sourcing.

Conclusion

The CSD18563Q5A MOSFET by Texas Instruments is a high efficiency power switching solution widely used in Semiconductors, Discrete Semiconductors, Transistors, and MOSFETs applications. Its low resistance, high current capability, and compact package make it ideal for modern power electronics designs.

FAQs – CSD18563Q5A MOSFET

What type of MOSFET is CSD18563Q5A?

It is an N-Channel power MOSFET designed for high efficiency switching.

Where is this MOSFET commonly used?

Power converters, motor drivers, battery systems, and industrial electronics.

Is it suitable for high current applications?

Yes, it is designed for high current and low power loss performance.

Which category does it belong to?

Semiconductors, Discrete Semiconductors, Transistors, and MOSFETs.

2SC3324-BL(TE85L,F Bipolar Transistors - BJT by Toshiba

The 2SC3324-BL(TE85L,F from Toshiba is a high-performance small signal transistor designed for switching and amplification in modern electronic circuits. It is widely used across Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT based circuit designs.

Available from https://www.xonelec.com/ including x-on electronics and xon electronics, this device is trusted for stable performance in professional electronic applications involving Semiconductors and Discrete Semiconductors.

Technical Specifications of 2SC3324-BL(TE85L,F

Product Overview

Manufacturer: Toshiba
Part Number: 2SC3324-BL(TE85L,F
Device Type: NPN Small Signal Transistor
Package: SOT-23 / SC-59
Collector-Emitter Voltage: ~120V
Collector Current: ~100mA
Power Dissipation: ~150mW
Mounting Type: Surface Mount

This device is widely implemented in Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT circuit protection and signal switching applications.

Key Features of 2SC3324-BL(TE85L,F

Performance & Electrical Benefits

• High Voltage Capability for Signal Switching

• Low Power Dissipation Design

• Compact SMD Package for PCB Space Saving

• High Reliability Semiconductor Structure

• Stable Gain Performance

These characteristics make it suitable for advanced Semiconductors and Discrete Semiconductors product designs using Transistors and Bipolar Transistors - BJT architectures.

Applications of 2SC3324-BL(TE85L,F

Common Industry Applications

• Signal Amplification Circuits

• Switching Regulators

• Consumer Electronics

• Industrial Automation Controls

• Communication Equipment

• Power Management Modules

Design engineers prefer Transistors based Bipolar Transistors - BJT devices in Semiconductors and Discrete Semiconductors circuit modules.

Products are globally available via https://www.xonelec.com/, x-on electronics, and xon electronics for sourcing Semiconductors and Discrete Semiconductors components.

Working Principle – Bipolar Transistor Operation

How BJT Controls Current

Base Current ? Controls Collector Current
Small Input Signal ? Large Output Switching/Amplification

This makes Bipolar Transistors - BJT essential in Semiconductors, Discrete Semiconductors, and Transistors signal processing circuits.

Use Case Scenario – Signal Switching Circuit

Real World Implementation

Scenario:
Industrial controller required reliable small signal switching transistor.

Problem:
MOSFET alternative increased circuit complexity.

Solution:
2SC3324-BL(TE85L,F provided stable switching using Transistors and Bipolar Transistors - BJT design.

Result:
Improved circuit stability and reduced component cost using Semiconductors and Discrete Semiconductors solutions.

Download Datasheet for 2SC3324-BL(TE85L,F

Looking for full specifications, electrical curves, or application circuits?

Download 2SC3324-BL(TE85L,F Datasheet from Xon Electronics 2SC3324-BL(TE85L,F Datasheet .

Why Buy from Xon Electronics?

Supplier Advantages

• Genuine Toshiba Semiconductor Components

• Global Export Support

• Bulk OEM Pricing

• Technical Component Support

• Secure Global Supply Chain

Order from https://www.xonelec.com/ for trusted Semiconductors, Discrete Semiconductors, and Transistors sourcing.

Conclusion

The 2SC3324-BL(TE85L,F transistor from Toshiba is a reliable small signal device widely used in Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT circuits. Its compact size, high voltage capability, and stable switching performance make it ideal for modern electronic designs.

FAQs – 2SC3324-BL(TE85L,F Transistor

What type of transistor is this?

It is an NPN small signal Bipolar Transistors - BJT device.

Where is it commonly used?

Signal amplification, switching circuits, and control electronics.

Is this a surface mount transistor?

Yes, it is an SMD transistor in SOT-23 package.

Which category does it belong to?

Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT.

1812L050/30PR Resettable Fuses - PPTC by Littelfuse

The Littelfuse  1812L050/30PR Resettable Fuses - PPTC is a compact surface-mount protection device designed to safeguard modern electronic circuits from overcurrent faults. Built using polymer positive temperature coefficient technology, it automatically resets after a fault condition clears.

This device is widely used in bold SEO categories like Circuit Protection, Thermistors, and Resettable Fuses - PPTC solutions for industrial electronics, telecom devices, and consumer electronics. Engineers sourcing from https://www.xonelec.com/ including x-on electronics and xon electronics rely on these components for dependable circuit reliability.

Technical Specifications of 1812L050/30PR

Product Overview

Manufacturer: Littelfuse
Part Number: 1812L050/30PR
Device Type: PPTC Resettable Fuse
Package Size: 1812 (4532 Metric)
Hold Current: 0.5A
Maximum Voltage: 30V DC
Mounting Type: Surface Mount (SMD)
Technology: Polymer PTC
Category: Circuit Protection, Thermistors, Resettable Fuses - PPTC

This device is optimized for Circuit Protection in sensitive electronic systems where automatic reset and thermal response are critical.

Key Features of 1812L050/30PR

Performance & Safety Advantages

• Automatic Reset Function – Reduces maintenance

• Fast Thermal Response – Protects circuits quickly

• Compact 1812 SMD Package – Saves PCB space

• High Reliability Polymer Technology

• Cost-Effective Circuit Protection Solution

These features make it ideal for Thermistors and Resettable Fuses - PPTC protection architectures used in modern electronics.

Applications of 1812L050/30PR

Where This PPTC Fuse is Used

• Power Supply Protection

• Battery Pack Safety

• USB Port Protection

• Industrial Control Systems

• Consumer Electronics

• Automotive Electronics

• Telecom Equipment

Designers prefer Resettable Fuses - PPTC for smart Circuit Protection and long lifecycle reliability. Components are widely distributed via https://www.xonelec.com/, x-on electronics, and xon electronics.

Working Principle – PPTC Resettable Fuse

How It Protects Circuits

Under normal current ? Low resistance
Overcurrent condition ? Resistance increases rapidly
Fault removed ? Device resets automatically

This behavior makes it superior compared to single-use fuses and highly suitable for Thermistors based Circuit Protection networks and Resettable Fuses - PPTC implementations.

Use Case Scenario – USB Device Protection

Real World Implementation

Scenario:
USB powered device requiring compact overcurrent protection.

Problem:
Traditional fuse replacement increased downtime.

Solution:
1812L050/30PR PPTC resettable fuse integrated into PCB.

Result:
Improved reliability and reduced service cost using Circuit Protection and Resettable Fuses - PPTC technology.

Download Datasheet for 1812L050/30PR

Looking for full specifications, certifications, or electrical curves?

Download 1812L050/30PR Datasheet from Xon Electronics

1812L050/30PR Datasheet

Why Buy from Xon Electronics?

Supplier Advantages

• Genuine Littelfuse Components

• Global Shipping Support

• Bulk Pricing for OEMs

• Technical Component Support

• Secure Online Ordering

Order from https://www.xonelec.com/ for reliable Circuit Protection and Thermistors product sourcing.

Conclusion

The 1812L050/30PR from Littelfuse is a reliable solution for modern Circuit Protection systems. With PPTC technology, compact SMD size, and automatic reset capability, it is widely used in Thermistors protection networks and Resettable Fuses - PPTC applications.

FAQs – 1812L050/30PR Resettable Fuse

What is the main function of this device?

It provides overcurrent protection and automatically resets after fault removal.

Is it reusable after tripping?

Yes, it is a PPTC resettable fuse.

Where is it commonly used?

Power supplies, battery circuits, USB protection, and control electronics.

What package size is this fuse?

1812 SMD package.

What category does this belong to?

Circuit Protection, Thermistors, and Resettable Fuses - PPTC.

LTST-C171GKT Standard LEDs - SMD by Lite-On

The LTST-C171GKT from Lite-On is a compact and energy-efficient LED solution designed for modern PCB assemblies requiring reliable illumination and indication. As part of the Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD category, this device offers high brightness, low power consumption, and long operational life. Engineers and OEMs trust this component for indicators, displays, consumer electronics, and industrial control systems.

Available globally through X-ON Electronics, this LED ensures consistent optical performance and dependable quality for professional electronic designs.

Technical Specifications

Electrical & Mechanical Details

• Manufacturer: Lite-On

• Part Number: LTST-C171GKT

• Category: Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD

• Package Type: SMD

• Emitting Color: Green

• Forward Voltage: 2.0 – 2.4V (typ.)

• Luminous Intensity: High brightness output

• Viewing Angle: Wide angle

• Mounting Style: Surface Mount

• Operating Temperature: –40°C to +85°C

• Low power consumption design

Key Features

Performance Benefits

• Compact SMD footprint for dense PCB layouts

• Energy-efficient Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD design

• Stable brightness and long service life

• Excellent visibility and wide viewing angle

• Ideal for automated SMT assembly

• Reliable thermal and electrical stability

The LTST-C171GKT is engineered to meet demanding requirements where dependable Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD components are essential.

Applications

Where LTST-C171GKT is Used

• Status indicators

• Consumer electronics

• Industrial equipment panels

• Medical devices

• Networking hardware

• Automotive dashboards

These industries depend on Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD solutions to provide consistent signaling and visual feedback.

Why Choose LTST-C171GKT from Lite-On?

Lite-On is known for manufacturing premium Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD products that combine efficiency, durability, and optical clarity. The LTST-C171GKT ensures reduced maintenance costs and reliable performance across various environments.

Purchase genuine parts directly from XON Electronics with global supply and dependable service.

Download Datasheet

Access complete technical specifications, electrical curves, and packaging information directly from the product page LTST-C171GKT Datasheet.

FAQs

Q1. What type of LED is LTST-C171GKT?

It is a surface-mount green indicator LED.

Q2. Is it suitable for automated SMT assembly?

Yes, it is fully compatible with standard reflow soldering processes.

Q3. Where can it be used?

Ideal for indicators, panels, and compact electronic devices.

Q4. Does it offer long life?

Yes, designed for extended operational hours with stable brightness.

Q5. Where can I buy it?

Available worldwide through Xon Electronics.

Conclusion

The LTST-C171GKT delivers dependable illumination, compact design, and efficient power usage, making it a trusted choice among Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD components. For authentic products and fast worldwide shipping, source directly from www.xonelec.com.

DS1009-14AT1NX IC & Component Sockets by Connfly

The DS1009-14AT1NX from Connfly is a reliable and durable socket solution designed for secure mounting and easy replacement of integrated circuits. Built for precision and stability, this part is widely used in Connectors, IC & Component Sockets applications across industrial, consumer, and development electronics.

Engineers prefer the DS1009-14AT1NX because it allows quick IC insertion and removal without solder stress, improving maintenance efficiency and protecting expensive components. Its strong contact retention, compact footprint, and through-hole design make it ideal for both prototyping and production environments.

For authentic parts and fast delivery, purchase directly from XON Electronics, your trusted source for Connectors, IC & Component Sockets worldwide.

Key Specifications

• Manufacturer: Connfly

• Part Number: DS1009-14AT1NX

• Product Type: IC Socket

• Category: Connectors, IC & Component Sockets

• Number of Positions: 14

• Mounting Type: Through Hole

• Contact Material: Phosphor Bronze / Gold plated

• Housing Material: High-temperature plastic

• Pitch: 2.54mm

• Operating Temperature: Industrial grade

Features & Benefits

The DS1009-14AT1NX provides strong electrical and mechanical performance, making it a dependable choice for modern Connectors, IC & Component Sockets requirements.

• Secure IC retention

• Low contact resistance

• Easy component replacement

• Durable plating for long life

• Reliable signal integrity

• Perfect for testing and prototyping

With these benefits, the DS1009-14AT1NX stands out among professional Connectors, IC & Component Sockets solutions.

Applications

Common use cases include:

• Microcontroller boards

• Development kits

• Industrial control systems

• Repairable PCB designs

• Test fixtures

• Embedded systems

Because of its flexible design, the DS1009-14AT1NX supports multiple Connectors, IC & Component Sockets implementations across various industries.

Why Choose DS1009-14AT1NX by Connfly?

Connfly is known for dependable interconnect products that meet strict quality standards. The DS1009-14AT1NX ensures stable connectivity, reduces soldering risks, and improves serviceability of circuits, making it a practical option for engineers and manufacturers alike.

When reliability and maintainability matter most, this Connectors, IC & Component Sockets product delivers excellent value.

Also Available from Other Manufacturers

This product category is also available from:

• Ninigi

Download Datasheet

Download the official DS1009-14AT1NX datasheet for mechanical drawings, pin configuration, and electrical specifications before integration DS1009-14AT1NX Datasheet.

Why Buy from XON Electronics?

• 100% genuine Connfly products

• Competitive pricing

• Bulk availability

• Fast global shipping

• Trusted distributor worldwide

Order today from https://www.xonelec.com/ for premium Connectors, IC & Component Sockets components.

Conclusion

The DS1009-14AT1NX by Connfly is a dependable and practical solution for engineers seeking high-quality Connectors, IC & Component Sockets that simplify installation, maintenance, and component replacement. With its durable construction, secure contact performance, and easy through-hole mounting, this socket improves PCB reliability while reducing servicing time and costs.

Whether you are building prototypes, industrial controllers, or embedded systems, the DS1009-14AT1NX delivers consistent performance and long operational life. For genuine parts, competitive pricing, and fast global delivery, choose XON Electronics and upgrade your designs with trusted Connectors, IC & Component Sockets today.

FAQs

Q1. What is DS1009-14AT1NX used for?
It is a 14-pin IC socket for safe and replaceable IC mounting.

Q2. Is it suitable for prototyping?
Yes, it allows easy IC swapping without soldering damage.

Q3. What mounting type does it support?
Through-hole mounting.

Q4. Does it provide stable electrical contact?
Yes, gold-plated contacts ensure low resistance.

Q5. Where can I buy it?
Available online at XON Electronics.

BC548A Bipolar Transistors - BJT by Diotec

The Bipolar Transistors - BJT BC548A by Diotec are reliable, low-noise general-purpose switching and amplification transistors widely used in consumer, industrial, and embedded electronics. Designed for stable gain and excellent electrical characteristics, the BC548A is a trusted choice for engineers looking for dependable Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT solutions.

Built using proven silicon technology, this transistor provides consistent current gain, low saturation voltage, and efficient performance in small-signal circuits. Whether you are designing audio amplifiers, signal processing modules, or switching stages, the BC548A ensures smooth operation and long service life.

For authentic parts and fast global shipping, buy genuine Diotec components online at XON Electronics.

Key Specifications

Technical Overview

• Manufacturer: Diotec

• Part Number: BC548A

• Product Type: NPN Small Signal Transistor

• Category: Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT

• Collector-Emitter Voltage (VCEO): 30V

• Collector Current (IC): 100mA

• Power Dissipation: 500mW

• Gain (hFE): 110–220 (A gain group)

• Package: TO-92

• Mounting Type: Through Hole

Features & Benefits

Why Engineers Choose BC548A

• Low noise performance for audio circuits

• High current gain stability

• Reliable switching and amplification

• Compact TO-92 footprint

• Low power consumption

• Cost-effective and widely available

The BC548A is ideal for modern Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT applications requiring efficient signal control.

Applications

Common Use Cases

• Audio amplifiers

• Signal conditioning circuits

• Switching loads

• Sensor interfacing

• Educational electronics projects

• Consumer electronic products

Thanks to its versatile design, the BC548A fits perfectly into numerous Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT systems.

Why Choose BC548A by Diotec?

Diotec is known for producing high-quality Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT components that meet industrial reliability standards. The BC548A delivers excellent performance, stable gain, and long-term durability even in demanding circuits.

Whether for prototyping or mass production, this transistor provides dependable and economical performance.

Download Datasheet

Access the official BC548A datasheet for detailed electrical parameters, pin configuration, and application circuits to ensure proper integration BC548A Datasheet.

Why Buy from XON Electronics?

• 100% genuine Diotec components

• Ready stock availability

• Competitive bulk pricing

• Fast worldwide shipping

• Trusted electronic component distributor

Order the BC548A today and experience reliable Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT performance.

Conclusion

The BC548A Bipolar Transistors - BJT by Diotec provide dependable amplification, low noise, and stable switching performance. Ideal for multiple small-signal designs, this transistor is a must-have for engineers and manufacturers seeking reliable discrete semiconductor solutions.

FAQs

Q1. What type of transistor is BC548A?

It is an NPN small-signal Bipolar Junction Transistor.

Q2. What package does it use?

Standard TO-92 through-hole package.

Q3. Can it be used for audio amplification?

Yes, it offers low noise and stable gain for audio circuits.

Q4. Is it suitable for switching?

Yes, supports low-current switching applications.

Q5. Where can I buy it?

Available online at XON Electronics.

CD1H224KC9BER1E000 Multilayer Ceramic Capacitors MLCC - Leaded by Dersonic

The Multilayer Ceramic Capacitors MLCC - Leaded CD1H224KC9BER1E000 by Dersonic are designed to deliver stable capacitance, high reliability, and consistent electrical performance for modern electronic circuits. These high-quality Passive Component,s Capacitors, Ceramic Capacitors, MLCCs - Multilayer Ceramic Capacitors, Multilayer Ceramic Capacitors MLCC - Leaded are widely used in filtering, decoupling, and noise suppression applications.

Engineered with advanced ceramic dielectric materials, this leaded MLCC ensures low ESR, excellent temperature stability, and long operational life. Whether used in consumer electronics, industrial devices, or embedded systems, the CD1H224KC9BER1E000 provides dependable circuit performance.

Available globally, you can purchase genuine Dersonic parts online at XON Electronics for fast delivery and competitive pricing.

Key Specifications

Technical Overview

• Manufacturer: Dersonic

• Part Number: CD1H224KC9BER1E000

• Product Type: Leaded MLCC

• Capacitance: 0.22µF (224)

• Voltage Rating: 50V (typical series)

• Dielectric: Ceramic

• Mounting Type: Leaded / Through Hole

• Temperature Stability: Reliable industrial grade

• Low ESR and low leakage

Ideal for Passive Component,s Capacitors, Ceramic Capacitors, MLCCs - Multilayer Ceramic Capacitors, Multilayer Ceramic Capacitors MLCC - Leaded applications.

Features & Benefits

Performance Highlights

• Stable capacitance over temperature

• High ripple current capability

• Compact and durable leaded design

• Low noise filtering performance

• Long operational lifespan

• Excellent mechanical strength

The CD1H224KC9BER1E000 supports demanding Passive Component,s Capacitors, Ceramic Capacitors, MLCCs - Multilayer Ceramic Capacitors, Multilayer Ceramic Capacitors MLCC - Leaded environments where reliability is critical.

Applications

Where It’s Used

• Power supply filtering

• Signal decoupling

• Noise suppression circuits

• Consumer electronics

• Industrial automation systems

• Embedded and IoT devices

Design engineers prefer the CD1H224KC9BER1E000 for stable performance across multiple Passive Component,s Capacitors, Ceramic Capacitors, MLCCs - Multilayer Ceramic Capacitors, Multilayer Ceramic Capacitors MLCC - Leaded solutions.

Why Choose CD1H224KC9BER1E000 by Dersonic?

Dersonic is known for producing dependable ceramic capacitors with consistent quality standards. The CD1H224KC9BER1E000 offers cost-effective reliability while maintaining electrical stability in demanding circuits.

If your project requires durable Passive Component,s Capacitors, Ceramic Capacitors, MLCCs - Multilayer Ceramic Capacitors, Multilayer Ceramic Capacitors MLCC - Leaded, this leaded MLCC is a trusted choice.

Download Datasheet

Access the official datasheet for complete electrical ratings, dimensions, and mounting guidelines to ensure proper integration into your PCB design CD1H224KC9BER1E000 Datasheet.

Why Buy from XON Electronics?

• 100% genuine Dersonic components

• Bulk stock availability

• Competitive pricing

• Worldwide shipping

• Trusted sourcing partner

Order the CD1H224KC9BER1E000 today for premium Passive Component,s Capacitors, Ceramic Capacitors, MLCCs - Multilayer Ceramic Capacitors, Multilayer Ceramic Capacitors MLCC - Leaded performance.

Conclusion

The CD1H224KC9BER1E000 Multilayer Ceramic Capacitors MLCC - Leaded by Dersonic deliver stable capacitance, durability, and efficient filtering for a wide range of electronics. Choose this reliable MLCC to ensure long-term circuit stability and dependable results.

FAQs

Q1. What is the capacitance value?

0.22µF (224 code).

Q2. Is it suitable for through-hole mounting?

Yes, it is a leaded through-hole MLCC.

Q3. Where can it be used?

Power supplies, filtering, and decoupling circuits.

Q4. Is it reliable for industrial use?

Yes, designed for stable performance in harsh environments.

Q5. Where can I buy it?

Available online at XON Electronics.