POW016 AC Power Leads by Itek

The AC Power Leads POW016 by Itek are designed to provide safe and reliable power connections for a wide range of electronic and industrial equipment. These leads are part of high-quality Wire & Cable solutions and are widely used in structured Cable Assemblies where stable AC input is critical.

Built with durable insulation and precision connectors, POW016 products ensure consistent performance in demanding environments. Whether used in laboratories, manufacturing floors, or commercial electronics, dependable AC Power Leads play a crucial role in protecting devices and maintaining operational uptime.

Technical Specifications of POW016

General Specifications

• Manufacturer: Itek

• Part Number: POW016

• Product Type: AC Power Lead

• Category: Wire & Cable, Cable Assemblies, AC Power Leads

• Application: Power input connections for electronic equipment

Construction Features

• High-grade copper conductors

• Robust outer insulation

• Secure molded connectors

• Compatible with global AC standards

These features make POW016 AC Power Leads by Itek suitable for integration into professional Cable Assemblies and long-term Wire & Cable installations.

Key Features of POW016 AC Power Leads

Safety and Reliability

• Stable power transmission

• Reduced electrical noise

• Heat-resistant insulation

Installation Benefits

• Plug-and-play compatibility

• Flexible cable routing

• Ideal for modular Cable Assemblies

Using certified AC Power Leads like POW016 helps prevent voltage drops and connection failures, especially in continuous-duty systems relying on quality Wire & Cable.

Applications of POW016 AC Power Leads

Industrial Applications

• Control panels

• Automation equipment

• Power distribution units

These systems rely on structured Cable Assemblies and dependable AC Power Leads for uninterrupted operation.

Commercial and IT Equipment

• Desktop power supplies

• Network devices

• Test and measurement instruments

In all these cases, quality Wire & Cable and proper AC Power Leads ensure device safety and performance.

System Integration Using POW016

Typical Power Connection Flow

• AC mains outlet

• POW016 AC Power Lead

• Equipment power inlet

• Internal power conversion

By using standardized Cable Assemblies, installation time is reduced and maintenance becomes easier, while maintaining safety through certified Wire & Cable products.

Use Case Example: Industrial Control Cabinet

Requirement

Reliable AC power input for PLC and monitoring equipment.

Solution

Installation of POW016 AC Power Leads by Itek with certified Wire & Cable routing and modular Cable Assemblies.

Outcome

• Stable power supply

• Reduced maintenance

• Improved equipment protection

Professionals prefer sourcing from XON Electronics to ensure original Itek products.

Download Datasheet – POW016 by Itek

The datasheet includes:

• Cable dimensions

• Electrical ratings

• Safety certifications

• Environmental compliance

         Download Datasheet – POW016

Why Buy POW016 AC Power Leads from XON

Customer Benefits

• 100% genuine Itek products

• Global shipping support

• Wide range of Wire & Cable and Cable Assemblies

• Trusted electronics distributor

For dependable sourcing, buy POW016 AC Power Leads by Itek from XON Electronics.

Conclusion

The POW016 AC Power Leads by Itek offer a safe, durable, and efficient solution for powering electronic equipment. When combined with professional Wire & Cable routing and reliable Cable Assemblies, these AC Power Leads ensure long-term system stability across industrial and commercial applications.

FAQs – POW016 AC Power Leads by Itek

What is POW016 used for?

It is used to connect electronic devices to AC mains power safely.

Are POW016 leads suitable for industrial use?

Yes, they are built for continuous industrial operation.

Can POW016 be used in cable assemblies?

Yes, they integrate well into structured Cable Assemblies.

Do these leads support global voltage standards?

Yes, they are compatible with standard international AC inputs.

Where can I buy POW016 AC Power Leads online?

Available at XON Electronics.

ICL7660SIPAZ Switching Voltage Regulators by Renesas

The Switching Voltage Regulators ICL7660SIPAZ by Renesas are compact charge-pump based voltage converters designed to efficiently generate regulated output voltages from a single power source. These regulators are widely used in low-power electronics requiring voltage inversion or regulation without inductors.

Classified under Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Switching Voltage Regulators, the ICL7660SIPAZ offers simple design and reliable performance. Genuine Renesas components are available at www.xonelec.com.

Technical Specifications of ICL7660SIPAZ

General Specifications

• Manufacturer: Renesas

• Part Number: ICL7660SIPAZ

• Product Type: Switching Voltage Regulator / Charge Pump

• Package: DIP-8

• Category: Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Switching Voltage Regulators

Electrical Characteristics

• Wide operating voltage range

• No inductor required

• Low quiescent current

• High efficiency for low-power systems

The ICL7660SIPAZ Switching Voltage Regulators by Renesas simplify power conversion in compact designs.

Key Features of ICL7660SIPAZ Switching Regulators

Performance Benefits

• Efficient voltage conversion

• Stable output regulation

• Low noise operation

Design Advantages

• Minimal external components

• Small PCB footprint

• Easy circuit implementation

Products in the Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Switching Voltage Regulators category enable efficient power solutions.

Applications of ICL7660SIPAZ

Portable Electronics

• Battery-powered devices

• Handheld instruments

• Wearable electronics

Industrial & Embedded Systems

• Signal conditioning circuits

• Sensor interfaces

• Communication modules

These applications rely on ICL7660SIPAZ Switching Voltage Regulators by Renesas for efficient power conversion.

Installation & Usage Guidelines

How to Use ICL7660SIPAZ

• Place capacitors close to IC pins

• Follow recommended PCB layout

• Avoid excessive load currents

High-quality Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Switching Voltage Regulators ensure stable and efficient designs.

Use Case Example: Voltage Inversion Circuit

Requirement

Generate negative voltage from single positive supply.

Challenge

Avoid bulky inductors in compact PCB layout.

Solution

ICL7660SIPAZ charge pump provided simple inverting supply.

Result

• Reduced component count

• Smaller PCB size

• Improved power efficiency

Engineers source Renesas regulators from X-On Electronics for trusted performance.

Download Datasheet – ICL7660SIPAZ

The datasheet includes:

• Electrical specifications

• Typical application circuits

• Pin configuration

• Thermal characteristics

      Download Datasheet – ICL7660SIPAZ

Why Buy from XON Electronics

Customer Benefits

• Genuine Renesas components

• Global shipping availability

• Competitive pricing

• Trusted electronics distributor

Buy ICL7660SIPAZ Switching Voltage Regulators by Renesas confidently from www.xonelec.com.

Conclusion

The ICL7660SIPAZ Switching Voltage Regulators by Renesas provide efficient voltage conversion, compact design, and reliable operation. As part of the Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Switching Voltage Regulators family, they are ideal for portable, embedded, and low-power applications.

FAQs – ICL7660SIPAZ Switching Voltage Regulators

What type of regulator is ICL7660SIPAZ?

It is a charge-pump based switching voltage regulator.

Does it require an inductor?

No, it operates without inductors.

Is it suitable for battery-powered devices?

Yes, it is optimized for low-power applications.

Can it generate negative voltage?

Yes, it can be configured as a voltage inverter.

Where can I buy it online?

Available at www.xonelec.com.

LD1117AV33 LDO Voltage Regulators by STMicroelectronics

The LDO Voltage Regulators LD1117AV33 by STMicroelectronics are high-performance linear regulators designed to provide a stable 3.3V output with low dropout voltage. These regulators are widely used in power management circuits where efficiency, simplicity, and reliability are critical.

Classified under Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, LDO Voltage Regulators, the LD1117AV33 is ideal for embedded systems and digital electronics. Genuine STMicroelectronics components are available at www.xonelec.com.

Technical Specifications of LD1117AV33

General Specifications

• Manufacturer: STMicroelectronics

• Part Number: LD1117AV33

• Product Type: Low Dropout Voltage Regulator

• Output Voltage: 3.3 V

• Category: Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, LDO Voltage Regulators

Electrical Characteristics

• Low dropout voltage

• High output current capability

• Built-in current limiting

• Thermal shutdown protection

The LD1117AV33 LDO Voltage Regulators by STMicroelectronics ensure safe and efficient voltage regulation.

Key Features of LD1117AV33 LDO Regulators

Performance Benefits

• Stable 3.3V output

• Low noise operation

• Fast transient response

Design Advantages

• Simple external component requirement

• Compact package options

• Suitable for linear power supplies

Products in the Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, LDO Voltage Regulators category are essential for reliable power delivery.

Applications of LD1117AV33

Embedded & Digital Systems

• Microcontroller power supplies

• FPGA and DSP voltage rails

• Development boards

Consumer & Industrial Electronics

• Communication modules

• Control circuits

• Sensor power regulation

These applications rely on LD1117AV33 LDO Voltage Regulators by STMicroelectronics for stable power output.

Installation & Usage Guidelines

How to Use LD1117AV33

• Provide adequate input voltage headroom

• Use recommended output capacitors

• Ensure proper heat dissipation

High-quality Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, LDO Voltage Regulators require correct thermal and layout design.

Use Case Example: Microcontroller Power Supply

Requirement

Stable 3.3V rail for MCU operation.

Challenge

Preventing voltage dips during load changes.

Solution

LD1117AV33 provided reliable voltage regulation with fast response.

Result

• Improved system stability

• Reduced reset issues

• Extended component life

Design engineers source ST regulators from X-On Electronics for guaranteed authenticity.

Download Datasheet – LD1117AV33

The datasheet includes:

• Electrical specifications

• Thermal characteristics

• Pin configuration

• Application circuits

      Download Datasheet – LD1117AV33

Why Buy from XON Electronics

Customer Benefits

• Genuine STMicroelectronics components

• Global shipping to all regions

• Competitive pricing

• Trusted electronics distributor

Buy LD1117AV33 LDO Voltage Regulators by STMicroelectronics confidently from www.xonelec.com.

Conclusion

The LD1117AV33 LDO Voltage Regulators by STMicroelectronics provide dependable 3.3V regulation, built-in protection features, and simple circuit design. As part of the Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, LDO Voltage Regulators family, they are ideal for embedded, consumer, and industrial electronics.

FAQs – LD1117AV33 LDO Voltage Regulators

What is the output voltage of LD1117AV33?

It provides a regulated 3.3V output.

Is it suitable for microcontroller circuits?

Yes, it is commonly used to power MCUs and logic devices.

Does it include protection features?

Yes, it has current limiting and thermal shutdown.

Is heat sinking required?

For high load currents, proper heat dissipation is recommended.

Where can I buy it online?

Available at www.xonelec.com.

R-RJ11R06P-A800 Modular Connectors / Ethernet Connectors by Cankemeng

The Modular Connectors / Ethernet Connectors R-RJ11R06P-A800 by Cankemeng are reliable communication interface components designed for secure signal transmission in telecommunication and networking equipment. These connectors support stable data connections and easy PCB integration.

Classified under Connectors, Modular Connectors / Ethernet Connectors, this part is ideal for compact devices that require dependable modular connectivity. Genuine Cankemeng connectors are available at www.xonelec.com.

Technical Specifications of R-RJ11R06P-A800

General Specifications

• Manufacturer: Cankemeng

• Part Number: R-RJ11R06P-A800

• Product Type: Modular Connector (RJ Type)

• Number of Positions: 6P

• Category: Connectors, Modular Connectors / Ethernet Connectors

Electrical & Mechanical Features

• Through-hole PCB mounting

• Secure latch mechanism

• Durable contact plating

• Low contact resistance

The R-RJ11R06P-A800 Modular Connectors / Ethernet Connectors by Cankemeng ensure stable performance in data and voice transmission systems.

Key Features of R-RJ11R06P-A800 Modular Connectors

Performance Benefits

• Reliable signal integrity

• Consistent mating cycles

• Reduced transmission loss

Design Advantages

• Compact PCB footprint

• Easy cable insertion

• Strong housing material

Products in the Connectors, Modular Connectors / Ethernet Connectors category are essential for communication interfaces.

Applications of R-RJ11R06P-A800

Telecommunication Equipment

• Telephone systems

• Modems and routers

• Communication modules

Embedded & Networking Devices

• IoT gateways

• Industrial controllers

• Monitoring systems

These systems rely on R-RJ11R06P-A800 Modular Connectors / Ethernet Connectors by Cankemeng for dependable connectivity.

Installation & Usage Guidelines

How to Install R-RJ11R06P-A800

• Align connector with PCB footprint

• Solder pins securely to board

• Test signal continuity after assembly

Using quality Connectors, Modular Connectors / Ethernet Connectors ensures stable long-term performance.

Use Case Example: Industrial Communication Module

Requirement

Compact and reliable RJ interface for data transmission.

Challenge

Ensuring stable connections under vibration.

Solution

R-RJ11R06P-A800 provided strong mechanical retention and signal stability.

Result

• Reduced signal interruptions

• Improved device reliability

• Easy field servicing

Engineers source Cankemeng connectors from X-On Electronics for trusted supply.

Download Datasheet – R-RJ11R06P-A800

The datasheet includes:

• Mechanical drawings

• Electrical ratings

• PCB layout recommendations

• Environmental specifications

       Download Datasheet – R-RJ11R06P-A800

Why Buy from XON Electronics

Customer Benefits

• Original Cankemeng components

• Worldwide shipping support

• Competitive pricing

• Trusted electronics distributor

Buy R-RJ11R06P-A800 Modular Connectors / Ethernet Connectors by Cankemeng confidently from www.xonelec.com.

Conclusion

The R-RJ11R06P-A800 Modular Connectors / Ethernet Connectors by Cankemeng deliver reliable signal transmission, strong mechanical durability, and easy PCB integration. As part of the Connectors, Modular Connectors / Ethernet Connectors family, they are ideal for telecom, networking, and embedded applications.

FAQs – R-RJ11R06P-A800 Modular Connectors

What type of connector is R-RJ11R06P-A800?

It is an RJ-type modular connector designed for data and voice connections.

Is it suitable for PCB mounting?

Yes, it is designed for through-hole PCB installation.

Can it be used in industrial devices?

Yes, it offers reliable performance in industrial environments.

Does it support frequent plug cycles?

Yes, it is built for repeated mating and unmating.

Where can I buy it online?

Available at www.xonelec.com.

5001 Test Plugs & Test Jacks by Keystone

The Test Plugs & Test Jacks 5001 by Keystone are high-quality test access components designed to provide safe and reliable electrical contact points during testing, troubleshooting, and calibration of electronic circuits. These components are essential in laboratory setups, production testing, and field diagnostics.

Classified under Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks, the 5001 series supports accurate signal access and dependable probe connections. Genuine Keystone products are available at www.xonelec.com.

Technical Specifications of 5001 Test Plugs & Test Jacks

General Specifications

• Manufacturer: Keystone Electronics

• Part Number: 5001

• Product Type: Test Plug / Test Jack

• Mounting Style: Panel or PCB Mount (application dependent)

• Category: Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks

Electrical & Mechanical Features

• Durable metal contacts

• Insulated housing for safety

• Secure probe insertion

• Low contact resistance

The 5001 Test Plugs & Test Jacks by Keystone are engineered for long service life and consistent electrical performance.

Key Features of 5001 Test Plugs & Test Jacks

Performance Benefits

• Stable electrical connectivity

• Reliable signal transmission

• Safe access to live circuits

Design Advantages

• Compact and robust design

• Easy installation on panels or PCBs

• Compatible with standard test probes

Products in the Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks category are vital for accurate diagnostics.

Applications of 5001 by Keystone

Laboratory & R&D Equipment

• Measurement instruments

• Circuit testing benches

• Prototype development

Production & Field Testing

• Functional testing stations

• Maintenance diagnostics

• Electrical calibration tools

These environments depend on 5001 Test Plugs & Test Jacks by Keystone for fast and safe testing access.

Installation & Usage Guidelines

How to Use 5001 Test Plugs & Test Jacks

• Mount securely on panel or PCB

• Ensure proper insulation spacing

• Insert probes gently to avoid wear

High-quality Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks improve testing accuracy and operator safety.

Use Case Example: Production Test Fixture

Requirement

Quick and reliable access to multiple test points.

Challenge

Maintaining consistent probe contact during repeated tests.

Solution

5001 test jacks provided stable and repeatable connections.

Result

• Faster test cycles

• Reduced probe damage

• Improved test reliability

Technicians source Keystone accessories from X-On Electronics for assured quality.

Download Datasheet – 5001 Test Plugs & Test Jacks

The datasheet includes:

• Mechanical drawings

• Electrical ratings

• Mounting details

• Material specifications

      Download Datasheet – 5001 Test Plugs & Test Jacks

Why Buy from XON Electronics

Customer Benefits

• Original Keystone components

• Worldwide shipping options

• Competitive pricing

• Trusted electronics distributor

Buy 5001 Test Plugs & Test Jacks by Keystone confidently from www.xonelec.com.

Conclusion

The 5001 Test Plugs & Test Jacks by Keystone provide safe, durable, and reliable access points for electrical testing. As part of the Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks family, they are ideal for laboratories, production testing, and maintenance applications.

FAQs – 5001 Test Plugs & Test Jacks

What are 5001 test jacks used for?

They provide connection points for test probes during measurements.

Are they suitable for PCB mounting?

Yes, depending on the installation design and fixture layout.

Can they handle frequent probe insertions?

Yes, they are designed for repeated testing cycles.

Are they safe for live circuit testing?

Yes, insulated designs improve user safety.

Where can I buy them online?

Available at www.xonelec.com.

BZX55B2V4-TAP Zener Diodes by Vishay

The Zener Diodes BZX55B2V4-TAP by Vishay are reliable voltage regulation components designed to provide stable reference voltage and overvoltage protection in electronic circuits. These axial-leaded Zener diodes are widely used in power management and signal conditioning applications.

Classified under Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Zener Diodes, this component is trusted for consistent performance and long-term stability. Genuine Vishay products are available at www.xonelec.com.

Technical Specifications of BZX55B2V4-TAP

General Specifications

• Manufacturer: Vishay

• Part Number: BZX55B2V4-TAP

• Product Type: Zener Diode

• Package: Axial Leaded

• Category: Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Zener Diodes

Electrical Characteristics

• Nominal Zener Voltage: 2.4 V

• Tight voltage tolerance

• Low leakage current

• Stable temperature coefficient

The BZX55B2V4-TAP Zener Diodes by Vishay ensure accurate voltage regulation in compact designs.

Key Features of BZX55B2V4-TAP Zener Diodes

Performance Benefits

• Precise voltage clamping

• High reliability under load

• Consistent breakdown voltage

Design Advantages

• Easy through-hole mounting

• Durable axial construction

• Suitable for automated and manual assembly

Products in the Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Zener Diodes category are essential for circuit protection and regulation.

Applications of BZX55B2V4-TAP

Power Supply Circuits

• Voltage reference networks

• Overvoltage protection

• Linear regulator support

Signal Conditioning Systems

• Clipping circuits

• Bias stabilization

• Sensor interface protection

These applications depend on BZX55B2V4-TAP Zener Diodes by Vishay for reliable voltage control.

Installation & Usage Guidelines

How to Use BZX55B2V4-TAP Zener Diodes

• Install with correct polarity

• Ensure adequate power dissipation

• Follow recommended operating limits

High-quality Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Zener Diodes improve circuit safety and longevity.

Use Case Example: Voltage Reference Circuit

Requirement

Stable low-voltage reference for sensor electronics.

Challenge

Maintaining consistent voltage under temperature variations.

Solution

BZX55B2V4-TAP provided accurate and stable Zener voltage.

Result

• Improved measurement accuracy

• Reduced circuit drift

• Reliable long-term operation

Design engineers source Vishay diodes from X-On Electronics for guaranteed authenticity.

Download Datasheet – BZX55B2V4-TAP

The datasheet includes:

• Electrical ratings

• Temperature characteristics

• Mechanical dimensions

• Recommended operating conditions

      Download Datasheet – BZX55B2V4-TAP

Why Buy from XON Electronics

Customer Benefits

• Original Vishay components

• Worldwide shipping support

• Competitive pricing

• Trusted electronics distributor

Buy BZX55B2V4-TAP Zener Diodes by Vishay confidently from www.xonelec.com.

Conclusion

The BZX55B2V4-TAP Zener Diodes by Vishay deliver accurate voltage regulation, excellent stability, and dependable circuit protection. As part of the Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Zener Diodes family, they are ideal for power management and signal conditioning applications.

FAQs – BZX55B2V4-TAP Zener Diodes

What is the Zener voltage of BZX55B2V4-TAP?

It provides a nominal Zener voltage of approximately 2.4 V.

Is it suitable for power regulation?

Yes, it is commonly used for voltage reference and protection circuits.

What package type does it use?

It comes in an axial through-hole package.

Can it be used in temperature-sensitive circuits?

Yes, it has stable temperature characteristics.

Where can I buy it online?

Available at www.xonelec.com.

4-986 Screwdrivers, Nut Drivers & Socket Drivers by Bernstein

The Screwdrivers, Nut Drivers & Socket Drivers 4-986 by Bernstein are professional-grade hand tools designed for precision fastening, durability, and user comfort. These tools are ideal for technicians, electricians, and maintenance professionals who require reliable performance in daily operations.

Belonging to the Tools & Supplies, Tools, Screwdrivers, Nut Drivers & Socket Drivers category, the 4-986 tools are engineered for industrial and workshop environments. Genuine Bernstein tools are available at www.xonelec.com.

Technical Specifications of 4-986 Tools

General Specifications

• Manufacturer: Bernstein

• Part Number: 4-986

• Product Type: Hand Tool (Driver)

• Tool Category: Tools & Supplies, Tools, Screwdrivers, Nut Drivers & Socket Drivers

Construction & Performance

• Hardened steel shaft for long life

• Precision-machined driver tip

• Ergonomic anti-slip handle

• High torque transmission

The 4-986 Screwdrivers, Nut Drivers & Socket Drivers by Bernstein deliver consistent fastening performance.

Key Features of 4-986 Screwdrivers & Drivers

Performance Benefits

• Accurate fit to fasteners

• Reduced cam-out and slippage

• Long-term mechanical strength

User Comfort & Safety

• Insulated grip for better control

• Fatigue-reducing handle design

• Balanced weight distribution

Professional users trust Tools & Supplies, Tools, Screwdrivers, Nut Drivers & Socket Drivers for efficient assembly and maintenance.

Applications of 4-986 by Bernstein

Industrial & Electrical Work

• Control panel assembly

• Electrical installations

• Equipment servicing

Workshops & Field Maintenance

• Mechanical repair

• Appliance servicing

• Automotive electronics

These environments rely on 4-986 Screwdrivers, Nut Drivers & Socket Drivers by Bernstein for dependable results.

Usage & Handling Guidelines

Best Practices for Using 4-986 Tools

• Select correct driver size for fasteners

• Apply steady, even torque

• Store tools in dry conditions

High-quality Tools & Supplies, Tools, Screwdrivers, Nut Drivers & Socket Drivers ensure safe and efficient operation.

Use Case Example: Control Panel Assembly

Requirement

Precision tightening of multiple fasteners.

Challenge

Avoiding stripped screws and user fatigue.

Solution

The ergonomic 4-986 driver improved grip and torque accuracy.

Result

• Faster installation

• Reduced hand strain

• Improved assembly quality

Professionals choose Bernstein tools from X-On Electronics for guaranteed quality.

Download Datasheet – 4-986 Tools

The datasheet includes:

• Tool dimensions

• Material specifications

• Torque capability

• Safety guidelines

     Download Datasheet – 4-986 Tools

Why Buy from XON Electronics

Customer Benefits

• Original Bernstein products

• Worldwide shipping

• Competitive pricing

• Trusted electronics and tools supplier

Buy 4-986 Screwdrivers, Nut Drivers & Socket Drivers by Bernstein confidently from www.xonelec.com.

Conclusion

The 4-986 Screwdrivers, Nut Drivers & Socket Drivers by Bernstein offer precision, durability, and ergonomic comfort for professional fastening tasks. As part of the Tools & Supplies, Tools, Screwdrivers, Nut Drivers & Socket Drivers category, they are ideal for industrial, electrical, and maintenance applications.

FAQs – 4-986 Screwdrivers, Nut Drivers & Socket Drivers

What type of tool is 4-986?

It is a professional hand driver used for fastening screws and nuts.

Is it suitable for industrial use?

Yes, it is designed for continuous professional use.

Does it have an ergonomic handle?

Yes, the handle is designed for comfort and grip.

Can it be used in electrical installations?

Yes, it is commonly used in control panel and wiring tasks.

Where can I buy it online?

Available at www.xonelec.com.

CXM-6-30-90-36-AC40-F5-3 High Power LEDs - White by Luminus Devices

The High Power LEDs - White CXM-6-30-90-36-AC40-F5-3 by Luminus Devices are advanced LED emitters designed for high-lumen output, excellent thermal performance, and long operational life. These emitters are ideal for demanding lighting applications that require consistent brightness and energy efficiency.

Classified under Optoelectronics, LED Lighting, LED Emitters, High Power LEDs - White, this component is widely used in professional and industrial lighting systems. Authentic Luminus Devices products are available at www.xonelec.com.

Technical Specifications of CXM-6-30-90-36-AC40-F5-3

General Specifications

• Manufacturer: Luminus Devices

• Part Number: CXM-6-30-90-36-AC40-F5-3

• Product Type: LED Emitter

• Light Color: White

• Category: Optoelectronics, LED Lighting, LED Emitters, High Power LEDs - White

Optical & Electrical Features

• High luminous flux output

• Optimized thermal pad for heat dissipation

• Consistent color temperature

• High efficiency at operating current

The CXM-6-30-90-36-AC40-F5-3 High Power LEDs - White by Luminus Devices are built for performance-critical lighting designs.

Key Features of CXM-6 Series High Power LEDs

Performance Benefits

• Bright, uniform white light

• Reduced energy consumption

• Long service life

Design Advantages

• Compact emitter footprint

• Easy integration into LED modules

• Reliable thermal management

Products in the Optoelectronics, LED Lighting, LED Emitters, High Power LEDs - White category support modern lighting efficiency standards.

Applications of CXM-6-30-90-36-AC40-F5-3

Industrial & Commercial Lighting

• High-bay lighting

• Street lighting

• Warehouse illumination

Specialty Lighting Systems

• Medical lighting equipment

• Stage and studio lighting

• Architectural lighting

These systems depend on CXM-6-30-90-36-AC40-F5-3 High Power LEDs - White by Luminus Devices for consistent and powerful illumination.

Installation & Thermal Management

How to Integrate CXM-6 High Power LEDs

• Mount on proper heat sinks or MCPCBs

• Use thermal interface materials

• Ensure adequate airflow or cooling

Using high-quality Optoelectronics, LED Lighting, LED Emitters, High Power LEDs - White requires correct thermal design for long-term reliability.

Use Case Example: High-Bay Industrial Lighting

Requirement

Bright and efficient lighting for warehouse ceilings.

Challenge

Maintaining brightness with minimal power consumption.

Solution

CXM-6 LED emitters delivered high lumen output with efficient thermal control.

Result

• Reduced energy costs

• Improved visibility

• Long maintenance cycles

Lighting designers source Luminus LEDs from X-On Electronics for genuine products.

Download Datasheet – CXM-6-30-90-36-AC40-F5-3

The datasheet includes:

• Electrical characteristics

• Optical performance curves

• Thermal ratings

• Mechanical dimensions

      Download Datasheet – CXM-6-30-90-36-AC40-F5-3

Why Buy from XON Electronics

Customer Benefits

• Original Luminus Devices products

• Worldwide shipping support

• Competitive component pricing

• Trusted electronics distributor

Buy CXM-6-30-90-36-AC40-F5-3 High Power LEDs - White by Luminus Devices confidently from www.xonelec.com.

Conclusion

The CXM-6-30-90-36-AC40-F5-3 High Power LEDs - White by Luminus Devices deliver powerful illumination, efficient thermal performance, and long operational life. As part of the Optoelectronics, LED Lighting, LED Emitters, High Power LEDs - White family, they are ideal for industrial, commercial, and specialty lighting applications.

FAQs – CXM-6-30-90-36-AC40-F5-3 High Power LEDs

What type of LED is CXM-6-30-90-36-AC40-F5-3?

It is a white high-power LED emitter for professional lighting systems.

Is it suitable for industrial lighting?

Yes, it is designed for high-bay and commercial lighting environments.

Does it require a heat sink?

Yes, proper thermal management is essential for safe operation.

Can it be used in outdoor lighting?

With proper enclosure and cooling, it can be used in outdoor fixtures.

Where can I buy it online?

Available at www.xonelec.com.

42037-1 (MINI REEL) Terminals by TE Connectivity

The Terminals 42037-1 (MINI REEL) by TE Connectivity are precision-engineered crimp terminals designed for reliable electrical connections in compact and high-volume applications. Supplied in a convenient mini reel packaging, these terminals support automated assembly and consistent performance.

Belonging to the Connectors, Terminals category, the 42037-1 terminals are widely used across industrial, automotive, and electronic manufacturing sectors. Genuine TE Connectivity products are available at www.xonelec.com.

Technical Specifications of 42037-1 (MINI REEL)

General Specifications

• Manufacturer: TE Connectivity

• Part Number: 42037-1

• Packaging: Mini Reel

• Product Type: Crimp Terminal

• Category: Connectors, Terminals

Mechanical & Electrical Features

• High-quality copper alloy construction

• Tin-plated contact surface

• Optimized for automated crimping

• Secure wire retention

The 42037-1 (MINI REEL) Terminals by TE Connectivity ensure dependable signal and power transmission.

Key Features of 42037-1 (MINI REEL) Terminals

Performance Advantages

• Consistent electrical conductivity

• Resistance to vibration and mechanical stress

• Long service life

Design Benefits

• Compact terminal profile

• Mini reel packaging for efficiency

• Compatible with industry-standard crimp tools

Products in the Connectors, Terminals range are essential for safe and durable wiring systems.

Applications of 42037-1 (MINI REEL)

Industrial & Automation Systems

• Control panels

• Industrial machinery

• Automation wiring harnesses

Electronics & Automotive

• Consumer electronics

• Automotive wiring assemblies

• Power distribution modules

These applications rely on 42037-1 (MINI REEL) Terminals by TE Connectivity for reliable connectivity.

Connection Overview

How 42037-1 Terminals Work

• Conductors are stripped to the required length

• Terminal is crimped using compatible tooling

• Crimped terminal is inserted into connector housing

Using Connectors, Terminals like 42037-1 ensures secure mechanical and electrical connections.

Use Case Example: Automated Wiring Line

Requirement

High-volume terminal termination with minimal downtime.

Challenge

Maintaining crimp quality during continuous production.

Solution

The 42037-1 mini reel packaging supported automated crimping with consistent results.

Result

• Reduced assembly time

• Improved connection reliability

• Lower production waste

Professionals source TE Connectivity terminals from X-On Electronics for assured quality.

Download Datasheet – 42037-1 (MINI REEL)

The datasheet includes:

• Crimp specifications

• Wire compatibility

• Material and plating details

• Packaging information

       Download Datasheet – 42037-1 (MINI REEL)

Why Buy from XON Electronics

Customer Benefits

• Genuine TE Connectivity components

• Global shipping availability

• Competitive pricing

• Trusted electronics supplier

Buy 42037-1 (MINI REEL) Terminals by TE Connectivity with confidence from www.xonelec.com.

Conclusion

The 42037-1 (MINI REEL) Terminals by TE Connectivity deliver precision, reliability, and efficiency for modern wiring applications. As part of the Connectors, Terminals family, they are ideal for automated production, industrial systems, and electronic assemblies.

FAQs – 42037-1 (MINI REEL) Terminals

What is 42037-1 used for?

It is used for crimping wires in connector assemblies.

What does MINI REEL packaging mean?

It is optimized packaging for automated crimping machines.

Is 42037-1 suitable for industrial use?

Yes, it is designed for industrial and commercial applications.

Which tools are required for crimping?

Compatible TE Connectivity crimp tools are recommended.

Where can I buy 42037-1 online?

Available at www.xonelec.com.

PAP-04V-S Headers & Wire Housings by JST

The Headers & Wire Housings PAP-04V-S by JST are high-quality wire-to-board connector housings designed for secure and reliable electrical connections. Widely used in compact electronic assemblies, these housings ensure stable mating with JST headers and long-term performance.

As part of the Connectors, Headers & Wire Housings category, PAP-04V-S is trusted by engineers across industrial, consumer, and embedded electronics. Authentic JST components are available from www.xonelec.com.

Technical Specifications of PAP-04V-S

General Specifications

• Manufacturer: JST

• Part Number: PAP-04V-S

• Product Type: Wire Housing

• Number of Positions: 4

• Category: Connectors, Headers & Wire Housings

Mechanical & Electrical Features

• Secure locking mechanism

• High-strength insulating material

• Precise terminal alignment

• Reliable mating interface

These characteristics make PAP-04V-S Headers & Wire Housings by JST suitable for demanding applications.

Key Features of PAP-04V-S Headers & Wire Housings

Performance Benefits

• Stable electrical contact

• Resistance to vibration

• Long operational life

Design Advantages

• Compact and lightweight

• Easy terminal insertion

• Compatible with JST VH series headers

The Connectors, Headers & Wire Housings category emphasizes safety, precision, and durability.

Applications of PAP-04V-S

Industrial Electronics

• Control systems

• Power distribution units

• Industrial automation panels

Consumer & Embedded Devices

• Home appliances

• Embedded control boards

• IoT devices

These systems rely heavily on PAP-04V-S Headers & Wire Housings by JST for dependable connectivity.

Connection Overview

How PAP-04V-S Functions

• Wires are crimped using compatible JST terminals

• Terminals are inserted into the housing

• Housing mates securely with PCB headers

Using Connectors, Headers & Wire Housings like PAP-04V-S improves assembly efficiency and connection stability.

Use Case Example: Compact Control Module

Requirement

A 4-position connector was needed for a space-constrained control board.

Challenge

Ensuring secure wire retention under vibration.

Solution

The PAP-04V-S housing provided firm locking and reliable mating.

Result

• Improved system reliability

• Reduced wiring errors

• Long-term electrical stability

Engineers source JST components from X-On Electronics for guaranteed authenticity.

Download Datasheet – PAP-04V-S

The datasheet includes:

• Housing dimensions

• Terminal compatibility

• Electrical ratings

• Assembly instructions

     Download Datasheet – PAP-04V-S

Why Buy from XON Electronics

Customer Advantages

• Genuine JST products

• Global shipping support

• Competitive pricing

• Trusted electronic components supplier

Buy PAP-04V-S Headers & Wire Housings by JST confidently from www.xonelec.com.

Conclusion

The PAP-04V-S Headers & Wire Housings by JST deliver secure wire-to-board connections, compact design, and excellent durability. As part of the Connectors, Headers & Wire Housings family, they are ideal for industrial, consumer, and embedded electronic applications.

FAQs – PAP-04V-S Headers & Wire Housings

What is PAP-04V-S used for?

It is used for wire-to-board electrical connections in JST systems.

How many positions does PAP-04V-S have?

It supports four wire positions.

Is PAP-04V-S suitable for industrial use?

Yes, it is designed for reliable industrial and commercial applications.

Does it require special crimping tools?

Standard JST crimp tools are recommended.

Where can I buy PAP-04V-S online?

Available at www.xonelec.com.