AB26TRB-32.768KHZ-T – Precision Timing Crystal by ABRACON for Low-Frequency Clocks

The Crystals AB26TRB-32.768KHZ-T by ABRACON are miniature tuning fork crystals designed for precision timing applications such as real-time clocks (RTC), microcontrollers, and low-power devices. With a 32.768 kHz frequency—a standard for clock generation—this crystal is optimized for stability, compactness, and minimal power consumption.

In this blog, we’ll explore the technical specs, key benefits, use cases, usage guidelines, and how to buy or download the datasheet from Xon Electronics.

Technical Specifications of AB26TRB-32.768KHZ-T

• Manufacturer: ABRACON

• Part Number: AB26TRB-32.768KHZ-T

• Type: Tuning Fork Quartz Crystal

• Frequency: 32.768 kHz

• Load Capacitance: 12.5 pF

• Frequency Tolerance: ±20 ppm

• ESR (Equivalent Series Resistance): 70 kO max

• Operating Temperature: -40°C to +85°C

• Package Type: SMD, 2-pin (2.0mm x 6.0mm)

• Category: Crystals, AB26TRB-32.768KHZ-T Crystals by ABRACON

With exceptional stability and low power draw, the AB26TRB-32.768KHZ-T Crystals by ABRACON are the go-to choice for clocking in portable and battery-operated electronics.

Key Features of AB26TRB-32.768KHZ-T

• Standard RTC Frequency (32.768 kHz) – Compatible with most RTC and MCU subsystems

• Compact 2x6 mm SMD Package – Ideal for space-constrained designs

• Low ESR & High Stability – Delivers accurate timekeeping under varied conditions

• Wide Operating Range – Functions from -40°C to +85°C

• RoHS Compliant – Lead-free and environmentally friendly

Thanks to these features, AB26TRB-32.768KHZ-T Crystals by ABRACON are widely used in timing-critical devices and ultra-low-power circuits.

Applications of AB26TRB-32.768KHZ-T

• Real-Time Clock (RTC) Circuits

• Smart Meters and Wearables

• Embedded Microcontrollers (MCUs)

• IoT Sensors and Modules

• Medical and Industrial Devices

When accurate, low-frequency oscillation is critical, the AB26TRB-32.768KHZ-T Crystals by ABRACON deliver consistent performance in energy-efficient systems.

Mounting and Usage Instructions

To use the AB26TRB-32.768KHZ-T in your design:

[Step 1] Place the crystal close to the oscillator input pins on the MCU/RTC
[Step 2] Use appropriate load capacitors (typically 12.5 pF) for tuning
[Step 3] Solder using standard reflow methods compatible with SMD
[Step 4] Avoid routing noisy traces near the crystal to reduce jitter
[Step 5] Confirm oscillator startup time during testing

Simple to use and extremely stable, the AB26TRB-32.768KHZ-T Crystals by ABRACON are ideal for long-life designs requiring real-time functionality.

Use Case Scenario – Battery-Powered IoT Sensor

Scenario: A smart agriculture sensor needed a real-time clock to manage data logging without draining the battery.

Problem: Traditional crystals consumed too much power and were physically too large.

Solution: The AB26TRB-32.768KHZ-T Crystals by ABRACON offered compact size, low ESR, and minimal power consumption.

Result: Increased battery life, compact design, and stable timing in field conditions.

This case illustrates why designers choose AB26TRB-32.768KHZ-T Crystals by ABRACON for time-sensitive, power-sensitive designs.

Download Datasheet for AB26TRB-32.768KHZ-T

Need load capacitance specs, pin configuration, or aging rates?

[Download AB26TRB-32.768KHZ-T Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

Xon Electronics offers authentic AB26TRB-32.768KHZ-T Crystals by ABRACON and related timing solutions:

100% Genuine ABRACON Parts
Global Shipping – USA, India, Australia, Europe & more
Ready-to-Ship Inventory
Technical Design Support
Safe & Seamless Online Checkout

Order now at www.xonelec.com and achieve accurate timing with AB26TRB-32.768KHZ-T Crystals by ABRACON.

Conclusion

The AB26TRB-32.768KHZ-T Crystals by ABRACON provide low-power, high-accuracy frequency control for embedded and time-sensitive applications. With their compact design and wide temperature range, AB26TRB-32.768KHZ-T Crystals by ABRACON are trusted across industries—from wearables to industrial IoT—available now from Xon Electronics.

FAQs – AB26TRB-32.768KHZ-T Crystal

Q1. What is the operating frequency?
32.768 kHz.

Q2. What is the package size?
2.0mm x 6.0mm SMD.

Q3. Is it suitable for battery-powered devices?
Yes, it offers low power consumption and high stability.

Q4. Can I use it with an RTC or MCU?
Absolutely—it’s designed specifically for that purpose.

Q5. Can I purchase globally?
Yes, from www.xonelec.com with delivery to USA, India, Australia, Europe, and more.

DS3231M+ Real Time Clock by Analog Devices – Precision Timekeeping for Embedded Systems

The Real Time Clock DS3231M+ by Analog Devices is a high-accuracy Semiconductors solution designed for precise timekeeping in embedded and industrial applications. This robust Integrated Circuits - ICs component provides a temperature-compensated crystal oscillator (TCXO) and crystal for enhanced stability, making it one of the most reliable Clock & Timer ICs in its class.

In this blog, we’ll explore the technical specifications, key features, applications, and how you can purchase it globally through Xon Electronics.

Technical Specifications of DS3231M+

• Manufacturer: Analog Devices

• Model: DS3231M+

• Type: Real Time Clock

• Voltage Range: 2.3V to 5.5V

• Interface: I²C Serial

• Timekeeping Accuracy: ±5ppm from 0°C to +40°C

• Backup Power: Supports battery backup

• Package: 8-Pin SOIC

• Category: Semiconductors, Integrated Circuits - ICs, Clock & Timer ICs, Real Time Clock

This Real Time Clock integrates crystal and compensation circuitry to minimize time drift, even under varying temperatures.

Key Features of DS3231M+ Real Time Clock

• Integrated TCXO for high accuracy across temperature ranges

• Battery backup for uninterrupted timekeeping

• I²C serial interface for easy communication with microcontrollers

• Minimal power consumption in standby mode

• Part of Analog Devices’ premium Clock & Timer ICs product range

The DS3231M+ Real Time Clock by Analog Devices ensures precise timing for mission-critical applications.

Applications of DS3231M+ Real Time Clock

• Embedded systems requiring precise scheduling

• Industrial automation and monitoring devices

• IoT devices with low power requirements

• Consumer electronics like clocks and smart appliances

• Automotive electronics with critical timing needs

These Integrated Circuits - ICs are ideal for designers seeking accurate and reliable Real Time Clock solutions.

Installation and Handling Overview

To integrate the DS3231M+:

• Connect to your system using the I²C interface.

• Ensure proper voltage regulation between 2.3V–5.5V.

• Use a suitable battery backup for power-failure scenarios.

• Follow ESD precautions when handling the Clock & Timer ICs package.

This Semiconductors component simplifies precise timekeeping in compact embedded designs.

Use Case Scenario: IoT Environmental Monitoring

Scenario: A designer required a low-power, high-accuracy Real Time Clock for an IoT environmental monitor.

Problem: Standard RTCs suffered from time drift in varying outdoor temperatures.

Solution: The DS3231M+ Real Time Clock by Analog Devices provided temperature compensation and reliable battery backup.

Result: Extended uptime and superior timing precision for critical data logging.

Download Datasheet for DS3231M+

Download DS3231M+ Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers authentic Analog Devices Real Time Clock solutions with:

• 100% Genuine Semiconductors for Embedded Systems

• Global Shipping to USA, India, Australia, Europe & more

• OEM Discounts and Bulk Order Support

• Technical Assistance for Integration

• Safe Online Ordering at www.xonelec.com

FAQs – DS3231M+ Real Time Clock by Analog Devices

Q1. What interface does this RTC use?
It uses an I²C serial interface for easy system integration.

Q2. Can it run on battery backup?
Yes, it supports battery backup to maintain timekeeping during power failures.

Q3. Is it suitable for industrial environments?
Yes, with temperature compensation, it is ideal for industrial and embedded systems.

Q4. Does Xon Electronics ship internationally?
Yes, we deliver to USA, India, Australia, Europe & more.

Conclusion

The DS3231M+ Real Time Clock by Analog Devices is a compact, reliable, and highly accurate solution for embedded applications. As a premium Semiconductors product in the Integrated Circuits - ICs and Clock & Timer ICs category, it is trusted globally for precision timekeeping. Order today from Xon Electronics for worldwide delivery and support.

DEP 40201-W OLED Displays & Accessories by Display Elektronik – Superior Visual Performance for Modern Devices

The OLED Displays & Accessories DEP 40201-W by Display Elektronik are premium Optoelectronics solutions offering high contrast, wide viewing angles, and energy efficiency. These advanced Displays are ideal for portable devices, industrial equipment, and consumer electronics where crisp visuals and reliable performance are essential.

In this blog, we’ll cover technical specifications, key features, applications, and how to download the datasheet or purchase from Xon Electronics.

Technical Specifications of DEP 40201-W

• Manufacturer: Display Elektronik

• Model: DEP 40201-W

• Type: OLED Displays & Accessories

• Display Size: 2.7 inches

• Resolution: 128 x 64 pixels

• Display Type: Monochrome White OLED

• Interface: I2C/SPI

• Operating Temperature: -40°C to +85°C

• Category: Optoelectronics, Displays, OLED Displays & Accessories

This compact OLED display provides excellent readability and low power consumption for embedded applications.

Key Features of DEP 40201-W OLED Displays

• Bright and sharp monochrome OLED display

• Wide viewing angles for superior visibility

• Energy-efficient design perfect for battery-powered devices

• Supports I2C and SPI interfaces for flexible integration

• Part of Display Elektronik’s high-quality OLED Displays & Accessories portfolio

The DEP 40201-W OLED Displays & Accessories by Display Elektronik deliver outstanding optical performance in compact designs.

Applications of DEP 40201-W OLED Displays

• Wearable devices and portable electronics

• Industrial control panels and instrumentation

• Consumer gadgets such as smart home systems

• Medical devices requiring clear visual output

• Embedded systems using advanced Optoelectronics solutions

These Displays are designed for applications requiring high-contrast, space-saving screens.

Installation and Handling Overview

To integrate the DEP 40201-W display:

• Connect via I2C/SPI depending on the system requirements.

• Ensure proper voltage regulation within the operating range.

• Follow ESD handling precautions for OLED Displays & Accessories.

• Test display outputs thoroughly during system integration.

This Optoelectronics component simplifies design for engineers building modern interfaces.

Use Case Scenario: Smart Thermostat Display Module

Scenario: A smart home company required compact and energy-efficient OLED Displays for their next-generation thermostats.

Problem: Previous LCD modules consumed excessive power and lacked readability in low light.

Solution: The DEP 40201-W OLED Displays by Display Elektronik offered superior contrast and low energy usage.

Result: Extended battery life and improved user experience.

Download Datasheet for DEP 40201-W

Download DEP 40201-W Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics provides authentic Display Elektronik OLED Displays & Accessories with:

• 100% Genuine Products for Embedded Applications

• Global Shipping to USA, India, Australia, Europe & more

• Bulk Order Discounts and OEM Support

• Expert Technical Assistance for Seamless Integration

• Secure Online Ordering at www.xonelec.com

FAQs – DEP 40201-W OLED Displays by Display Elektronik

Q1. What interfaces does this OLED display support?
It supports both I2C and SPI interfaces.

Q2. Is it suitable for outdoor applications?
Yes, it has a wide operating temperature range and excellent contrast.

Q3. Can I order in bulk for OEM projects?
Yes, Xon Electronics offers OEM support and bulk discounts.

Q4. Does Xon Electronics deliver worldwide?
Yes, shipping is available to USA, India, Australia, Europe & more.

Conclusion

The DEP 40201-W OLED Displays & Accessories by Display Elektronik provide high contrast, energy efficiency, and versatility for embedded and consumer applications. As premium Optoelectronics in the Displays category, they are a trusted choice worldwide. Order now from Xon Electronics for global delivery and technical support.

CY8C29666-24PVXI 8-bit Microcontrollers - MCU by Infineon – High-Performance Embedded Solutions

The 8-bit Microcontrollers - MCU CY8C29666-24PVXI by Infineon are versatile Semiconductors designed to meet the needs of embedded systems across a range of industries. As part of Infineon’s advanced Integrated Circuits - ICs and Embedded Processors & Controllers portfolio, these Microcontrollers - MCU offer robust features, energy efficiency, and design flexibility.

In this blog, we explore the technical specifications, key features, applications, and how to download the datasheet or purchase from Xon Electronics.

Technical Specifications of CY8C29666-24PVXI

• Manufacturer: Infineon Technologies

• Model: CY8C29666-24PVXI

• Type: 8-bit Microcontrollers - MCU

• CPU Core: M8C 8-bit

• Flash Memory: 64KB

• SRAM: 4KB

• Operating Voltage: 2.7V to 5.5V

• Clock Speed: 24 MHz

• Package: 52-Pin PQFP

• Category: Semiconductors, Integrated Circuits - ICs, Embedded Processors & Controllers, Microcontrollers - MCU, 8-bit Microcontrollers - MCU

This Microcontroller offers an ideal combination of processing power and peripheral support for embedded applications.

Key Features of CY8C29666-24PVXI Microcontroller

• Flexible programmable system-on-chip (PSoC®) architecture

• Integrated analog and digital peripherals for complex designs

• Supports multiple communication interfaces including UART, SPI, and I²C

• Low power consumption for energy-sensitive applications

• Part of Infineon’s premium Embedded Processors & Controllers range

The CY8C29666-24PVXI 8-bit Microcontrollers - MCU by Infineon provide engineers with design freedom and high reliability in compact systems.

Applications of CY8C29666-24PVXI Microcontrollers

• Industrial automation and control systems

• Consumer electronics and home appliances

• Medical devices and instrumentation

• Automotive control systems

• OEM designs requiring reliable Microcontrollers - MCU solutions

These 8-bit Microcontrollers - MCU are engineered for diverse embedded applications requiring performance and scalability.

Installation and Handling Overview

To integrate the CY8C29666-24PVXI:

• Ensure proper soldering of the 52-pin PQFP package onto the PCB.

• Use Infineon development tools for programming and debugging.

• Design power circuits to support voltage ranges between 2.7V–5.5V.

• Test thoroughly in target environments for optimal performance.

This Semiconductors solution simplifies embedded system design while ensuring robust operation.

Use Case Scenario: Smart Home Automation Controller

Scenario: A company required compact and programmable Microcontrollers - MCU for their next-generation smart home hubs.

Problem: Limited GPIO options and high power consumption in previous designs restricted functionality.

Solution: The CY8C29666-24PVXI Microcontroller by Infineon provided flexible PSoC® capabilities and energy efficiency.

Result: Expanded device features and increased market competitiveness.

Download Datasheet for CY8C29666-24PVXI

Download CY8C29666-24PVXI Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics provides genuine Infineon Embedded Processors & Controllers with:

• 100% Authentic Products for Embedded Applications

• Fast Global Shipping to USA, India, Australia, Europe & more

• Bulk Discounts and OEM Support Available

• Technical Assistance for Seamless Integration

• Secure Online Ordering at www.xonelec.com

FAQs – CY8C29666-24PVXI Microcontrollers

Q1. What is the clock speed of this MCU?
It supports up to 24 MHz for fast embedded processing.

Q2. Is this suitable for low-power applications?
Yes, it offers energy-efficient operation ideal for battery-powered devices.

Q3. Can this MCU handle multiple communication protocols?
Yes, it supports UART, SPI, and I²C interfaces.

Q4. Does Xon Electronics ship worldwide?
Yes, we deliver to USA, India, Australia, Europe & more.

Conclusion

The CY8C29666-24PVXI 8-bit Microcontrollers - MCU by Infineon offer powerful and flexible solutions for embedded applications in industrial, automotive, and consumer markets. As premium Semiconductors in the Integrated Circuits - ICs category, they are trusted globally for high-performance designs. Order today from Xon Electronics for global delivery and technical support.

CONSMA002-G RF Connectors/Coaxial Connectors by Linx Technologies – Reliable Connectivity for RF Systems

The RF Connectors/Coaxial Connectors CONSMA002-G by Linx Technologies are premium-quality Connectors engineered for robust and reliable RF signal transmission. These compact and durable RF Interconnects ensure excellent performance across a wide frequency range, making them ideal for applications in telecommunications, IoT devices, and industrial systems.

In this blog, we’ll explore technical specifications, key features, applications, and how to download the datasheet or purchase from Xon Electronics.

Technical Specifications of CONSMA002-G

• Manufacturer: Linx Technologies

• Model: CONSMA002-G

• Type: RF Connectors/Coaxial Connectors

• Connector Style: SMA Jack (Female)

• Mounting Type: Panel Mount

• Impedance: 50 Ohms

• Frequency Range: DC to 6 GHz

• Category: Connectors, RF Interconnects, RF Connectors/Coaxial Connectors

These Connectors are designed for seamless integration into high-frequency applications with minimal signal loss.

Key Features of CONSMA002-G RF Connectors

• SMA jack design for reliable RF connections

• Wide frequency range up to 6 GHz

• 50-ohm impedance for superior signal integrity

• Panel mount configuration for secure installations

• Part of Linx Technologies’ trusted RF Connectors/Coaxial Connectors range

The CONSMA002-G RF Connectors/Coaxial Connectors by Linx Technologies provide unmatched reliability in demanding RF systems.

Applications of CONSMA002-G RF Connectors

• Wireless communication systems

• IoT devices and gateways

• GPS modules and antennas

• Test and measurement equipment

• Industrial automation requiring durable RF Interconnects

These Connectors are ideal for engineers designing RF solutions where performance and reliability are critical.

Installation and Handling Overview

To install the CONSMA002-G:

• Mount securely to the panel using the threaded interface.

• Connect with compatible SMA plugs for optimal RF performance.

• Verify proper torque to avoid mechanical or electrical damage.

• Ensure shielding for reduced EMI in sensitive applications.

This RF Connector simplifies assembly while maintaining excellent signal quality.

Use Case Scenario: IoT Gateway Antenna Interface

Scenario: A manufacturer required compact and durable RF Connectors/Coaxial Connectors for their IoT gateways.

Problem: Previous connectors lacked durability under outdoor conditions.

Solution: The CONSMA002-G Connectors by Linx Technologies provided reliable performance and a secure panel mount design.

Result: Enhanced system reliability and reduced maintenance costs.

Download Datasheet for CONSMA002-G

Download CONSMA002-G Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics supplies genuine Linx Technologies RF Connectors/Coaxial Connectors with:

• 100% Authentic Products for RF Applications

• Global Shipping to USA, India, Australia, Europe & more

• Bulk Order Discounts and OEM Support

• Expert Technical Assistance for Smooth Integration

• Secure Online Ordering at www.xonelec.com

FAQs – CONSMA002-G RF Connectors/Coaxial Connectors by Linx Technologies

Q1. What type of connector is CONSMA002-G?
It’s an SMA jack (female) panel mount RF connector.

Q2. What frequency range does it support?
It supports DC to 6 GHz for versatile RF applications.

Q3. Is it suitable for outdoor use?
Yes, with proper enclosure design, it can handle outdoor environments.

Q4. Does Xon Electronics offer worldwide shipping?
Yes, we ship to USA, India, Australia, Europe & more.

Conclusion

The CONSMA002-G RF Connectors/Coaxial Connectors by Linx Technologies deliver exceptional signal integrity and durability for a wide range of RF systems. As premium Connectors in the RF Interconnects category, they are trusted globally for demanding applications. Order today from Xon Electronics for worldwide delivery and support.

782090 – Compact General Purpose Relay by WJ Relay for Versatile Switching

The General Purpose Relays 782090 by WJ Relay deliver reliable and efficient switching in various industrial, commercial, and electronic control systems. Designed for high electrical endurance and fast operation, this relay ensures consistent performance in automation, HVAC, lighting, and control panels.

In this blog, we’ll cover its key specifications, features, application areas, usage guidelines, and how to download the datasheet or purchase from Xon Electronics.

Technical Specifications of 782090

• Manufacturer: WJ Relay

• Part Number: 782090

• Type: General Purpose Relay

• Coil Voltage: 12V DC

• Contact Configuration: SPDT (Single Pole Double Throw)

• Contact Rating: 10A @ 250VAC / 10A @ 30VDC

• Mounting Type: Through-Hole

• Dielectric Strength: 4000V RMS

• Operating Temperature Range: -40°C to +85°C

• Category: Relays, 782090 General Purpose Relays by WJ Relay

Built for versatility and long-term use, the 782090 General Purpose Relays by WJ Relay are ideal for systems where dependable load control is required.

Key Features of 782090

• SPDT Switching Format – Enables flexible control for AC and DC loads

• High Current Capacity (10A) – Suitable for medium-duty switching tasks

• Compact Through-Hole Design – Perfect for dense PCB layouts

• Reliable Coil Response – Fast and accurate operation with low power draw

• Electrical Isolation – Coil-to-contact isolation enhances system safety

These features make the 782090 General Purpose Relays by WJ Relay ideal for use in automated systems, signal switching, and power management modules.

Applications of 782090 Relay

• HVAC Controllers and Thermostats

• Home and Industrial Automation

• Lighting Circuits and Timers

• Security Systems

• Smart Power Distribution Boards

From building automation to consumer appliances, the 782090 General Purpose Relays by WJ Relay enable safe and consistent switching in compact, modular designs.

Mounting and Usage Instructions

To integrate the 782090 relay into your design:

[Step 1] Solder the through-hole pins into a compatible PCB layout
[Step 2] Connect the coil terminals to a 12V DC control signal
[Step 3] Wire the load through the common (COM), normally open (NO), and normally closed (NC) pins
[Step 4] Ensure proper spacing and ventilation for thermal protection
[Step 5] Test with your control logic to confirm reliable switching

With simple integration steps and robust performance, the 782090 General Purpose Relays by WJ Relay support smooth system operation in diverse conditions.

Use Case Scenario – HVAC Fan Control System

Scenario: A facilities engineer required a durable and compact relay to control 240V AC fans in a programmable HVAC system.

Problem: Previous relays failed under extended load or thermal cycling.

Solution: The 782090 General Purpose Relays by WJ Relay offered reliable 10A switching with superior isolation and electrical endurance.

Result: Long-term operation, minimal downtime, and higher system efficiency.

This real-world example illustrates the dependable functionality of 782090 General Purpose Relays by WJ Relay.

Download Datasheet for 782090

Looking for electrical curves, pin configurations, or switching characteristics?

[Download 782090 Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

Xon Electronics offers genuine 782090 General Purpose Relays by WJ Relay with:

• 100% Verified WJ Relay Components
• Fast Global Shipping – USA, India, Australia, Europe & more
• Ready-to-Ship Inventory
• Technical Support for Control Circuit Designers
• Secure Checkout and Easy Online Ordering

Shop now at www.xonelec.com and keep your control systems running smoothly with trusted WJ Relay products.

Conclusion

The 782090 General Purpose Relays by WJ Relay combine reliability, performance, and ease of integration. With a robust 10A contact rating, compact form factor, and SPDT switching, these relays are a dependable choice for engineers across automation, HVAC, and electronics industries. Choose 782090 General Purpose Relays by WJ Relay—available globally from Xon Electronics.

FAQs – 782090 WJ Relay

Q1. What is the coil voltage for this relay?
12V DC.

Q2. What load can the contacts handle?
10A @ 250VAC or 10A @ 30VDC.

Q3. What type of switching configuration is used?
SPDT (Single Pole Double Throw).

Q4. Can I use it in HVAC or lighting systems?
Yes, it is ideal for both.

Q5. Is it available worldwide?
Yes, order from www.xonelec.com with shipping to USA, India, Australia, Europe, and more.

CLP-110-02-G-D Board to Board & Mezzanine Connectors by Samtec – Precision Connectivity Solutions

The Board to Board & Mezzanine Connectors CLP-110-02-G-D by Samtec are high-performance Connectors designed for robust and reliable interconnect solutions in compact electronic systems. These versatile Board to Board & Mezzanine Connectors provide excellent signal integrity and mechanical stability, making them ideal for a wide range of applications from consumer electronics to industrial automation.

In this blog, we’ll explore the technical specifications, key features, applications, and purchasing details for engineers and designers seeking high-quality interconnect solutions.

Technical Specifications of CLP-110-02-G-D

• Manufacturer: Samtec

• Model: CLP-110-02-G-D

• Type: Board to Board & Mezzanine Connectors

• Contact Rows: Dual Row

• Pitch: 2.54mm

• Number of Positions: 20

• Mounting Style: Through Hole

• Operating Temperature Range: -55°C to +125°C

• Category: Connectors, Board to Board & Mezzanine Connectors

These Connectors deliver reliable electrical performance and are engineered for seamless integration into demanding designs.

Key Features of CLP-110-02-G-D Board to Board & Mezzanine Connectors

• Dual-row configuration for enhanced connection density

• Durable design for high-cycle mating applications

• 2.54mm pitch for standard board spacing

• Broad operating temperature range for industrial use

• Part of Samtec’s premium Board to Board & Mezzanine Connectors collection

The CLP-110-02-G-D Board to Board & Mezzanine Connectors by Samtec ensure consistent performance and easy integration in complex electronic systems.

Applications of CLP-110-02-G-D Board to Board Connectors

• Consumer electronics and handheld devices

• Embedded systems and IoT devices

• Telecommunications and networking equipment

• Industrial control panels and automation systems

• OEM solutions requiring high-density Connectors

These Board to Board & Mezzanine Connectors are ideal for compact designs where reliability and space efficiency are critical.

Installation and Handling Overview

To integrate the CLP-110-02-G-D:

• Align the connector properly with the board footprint before soldering.

• Use appropriate through-hole soldering techniques for a secure fit.

• Ensure mating connectors align precisely to avoid mechanical stress.

• Follow Samtec’s handling guidelines for long-term performance.

This robust Connector ensures seamless board-to-board connections for versatile electronic applications.

Use Case Scenario: Compact Embedded Systems

Scenario: An embedded systems designer required compact and durable Board to Board & Mezzanine Connectors for a multi-board IoT device.

Problem: Conventional connectors did not meet the space constraints and required mating cycles.

Solution: The CLP-110-02-G-D Connectors by Samtec offered high-density pin configurations and reliable performance.

Result: Improved design efficiency and reduced assembly time.

Download Datasheet for CLP-110-02-G-D

Download CLP-110-02-G-D Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics supplies authentic Samtec Board to Board & Mezzanine Connectors with:

• 100% Genuine Products for Industrial and Consumer Applications

• Global Shipping to USA, India, Australia, Europe & more

• Bulk Order Discounts and OEM Support Available

• Technical Assistance for Seamless Integration

• Secure Online Ordering at www.xonelec.com

FAQs – CLP-110-02-G-D Board to Board & Mezzanine Connectors by Samtec

Q1. What is the pitch of this connector?
It has a 2.54mm pitch for standard board spacing.

Q2. Is this connector suitable for industrial applications?
Yes, it supports a wide operating temperature range and high-cycle durability.

Q3. Can I purchase this connector globally?
Yes, Xon Electronics ships to USA, India, Australia, Europe & more.

Q4. Is this part RoHS compliant?
Yes, it meets global compliance standards.

Conclusion

The CLP-110-02-G-D Board to Board & Mezzanine Connectors by Samtec are robust, reliable, and ideal for space-constrained designs across industrial and consumer electronics. As premium Connectors, they are trusted worldwide for seamless integration and long-lasting performance. Order today from Xon Electronics for global delivery and technical support.

CDR7D43MNNP-100NC Fixed Inductors by Sumida – Reliable Passive Components for Power Applications

The Fixed Inductors CDR7D43MNNP-100NC by Sumida are high-quality Passive Components designed for efficient energy storage and filtering in electronic circuits. These compact and durable Inductors Chokes & Coils are optimized for applications requiring stable inductance and high reliability. As part of Sumida’s advanced range of Fixed Inductors, the CDR7D43MNNP-100NC ensures excellent performance in power supplies, DC-DC converters, and other critical systems.

In this blog, we’ll explore technical specifications, key features, applications, installation details, and how to download the datasheet or purchase from Xon Electronics.

Technical Specifications of CDR7D43MNNP-100NC

• Manufacturer: Sumida

• Model: CDR7D43MNNP-100NC

• Type: Fixed Inductors

• Inductance: 10µH

• Rated Current: 2.3A

• DC Resistance (DCR): 0.060O max

• Operating Temperature: -40°C to +125°C

• Package: Surface Mount Device (SMD)

• Category: Passive Components, Inductors Chokes & Coils, Fixed Inductors

These Inductors are engineered for high efficiency and excellent thermal stability in compact designs.

Key Features of CDR7D43MNNP-100NC Fixed Inductors

• Compact SMD package for space-constrained designs

• High current handling capability (up to 2.3A)

• Low DCR for minimal energy loss

• Excellent thermal stability and reliability

• Part of Sumida’s trusted Passive Components and Inductors Chokes & Coils range

The CDR7D43MNNP-100NC Fixed Inductors by Sumida deliver superior performance for demanding electronic applications.

Applications of CDR7D43MNNP-100NC Fixed Inductors

• DC-DC converters in portable electronics

• Power supply filtering in industrial systems

• Automotive electronic control units (ECUs)

• Consumer electronics like LED drivers and gaming consoles

• OEM designs utilizing Fixed Inductors for energy-efficient solutions

These Inductors Chokes & Coils are perfect for modern high-frequency circuits.

Installation and Handling Overview

To integrate the CDR7D43MNNP-100NC:

• Place using automated pick-and-place equipment for SMD.

• Ensure proper soldering with reflow techniques suitable for the component’s thermal profile.

• Avoid excessive mechanical stress during PCB assembly.

• Follow Sumida’s guidelines for safe handling and operation.

This Passive Component is designed for seamless integration into compact and high-efficiency designs.

Use Case Scenario: DC-DC Converter in Portable Devices

Scenario: A portable electronics manufacturer needed compact and efficient Fixed Inductors for DC-DC converter modules.

Problem: Conventional inductors exhibited excessive heat generation and poor efficiency.

Solution: The CDR7D43MNNP-100NC Fixed Inductors by Sumida provided low DCR and high current handling, ensuring stable operation.

Result: Improved power efficiency and longer device battery life.

Download Datasheet for CDR7D43MNNP-100NC

Download CDR7D43MNNP-100NC Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics provides genuine Sumida Fixed Inductors with:

• 100% Authentic Products for Power and Signal Applications

•  Fast Global Shipping to USA, India, Australia, Europe & more

• OEM Discounts and Bulk Order Support

• Technical Assistance for Smooth Integration

• Secure Online Ordering at www.xonelec.com

FAQs – CDR7D43MNNP-100NC Fixed Inductors by Sumida

Q1. What is the rated current for this inductor?
It supports up to 2.3A of continuous current.

Q2. Is it suitable for high-frequency circuits?
Yes, it performs exceptionally in high-frequency DC-DC converters.

Q3. Can it operate at high temperatures?
Yes, it supports a wide operating range of -40°C to +125°C.

Q4. Does Xon Electronics deliver globally?
Yes, we ship to USA, India, Australia, Europe & more.

Conclusion

The CDR7D43MNNP-100NC Fixed Inductors by Sumida deliver efficiency, compactness, and reliability for power electronics and filtering applications. As premium Passive Components in the Inductors Chokes & Coils category, they are a trusted choice for engineers worldwide. Order today from Xon Electronics for global delivery and technical support.

CAB.719 RF Cable Assemblies by Taoglas – High-Performance Connectivity for RF Applications

The RF Cable Assemblies CAB.719 by Taoglas are premium-quality Wire & Cable solutions engineered for efficient signal transmission in RF and wireless systems. These versatile Cable Assemblies are designed to deliver superior performance, flexibility, and durability, making them an ideal choice for demanding applications. As part of Taoglas' reliable range of RF Cable Assemblies, the CAB.719 ensures consistent signal integrity across various industrial and commercial environments.

In this blog, we’ll dive into technical specifications, key features, applications, installation tips, and details on how to download the datasheet or purchase from Xon Electronics.

Technical Specifications of CAB.719

• Manufacturer: Taoglas

• Model: CAB.719

• Type: RF Cable Assemblies

• Connector Type: SMA Male to SMA Female

• Cable Type: RG-316

• Frequency Range: DC to 6 GHz

• Length: 500mm (custom lengths available)

• Impedance: 50 Ohms

• Category: Wire & Cable, Cable Assemblies, RF Cable Assemblies

These RF Cable Assemblies are optimized for low signal loss and excellent shielding in critical applications.

Key Features of CAB.719 RF Cable Assemblies

• Supports frequencies up to 6 GHz for high-speed data transmission

• Flexible and durable RG-316 cable design

• SMA connectors for secure and reliable connections

• Excellent shielding to minimize EMI/RFI interference

• Part of Taoglas’ trusted Wire & Cable and Cable Assemblies product range

The CAB.719 RF Cable Assemblies by Taoglas are engineered for professionals requiring dependable RF connectivity.

Applications of CAB.719 RF Cable Assemblies

• Wireless communication and IoT devices

• Test and measurement equipment

• Antenna and GPS module connections

• Industrial automation systems

• OEM projects requiring high-quality RF Cable Assemblies

These Cable Assemblies are ideal for applications demanding consistent RF signal performance.

Installation and Handling Overview

To integrate the CAB.719 RF Cable Assembly:

• Connect SMA male and female ends to the corresponding ports securely.

• Avoid sharp bends to maintain signal integrity.

• Verify impedance matching in high-frequency applications.

• Regularly inspect for wear or damage in dynamic environments.

These Wire & Cable components ensure optimal connectivity and longevity.

Use Case Scenario: IoT Device Antenna Integration

Scenario: An IoT device manufacturer required flexible and compact RF Cable Assemblies for antenna connections in their compact designs.

Problem: Standard cables were too bulky and suffered from high signal loss.

Solution: The CAB.719 RF Cable Assemblies by Taoglas provided a compact, low-loss solution with excellent flexibility.

Result: Improved device performance and easier assembly in tight spaces.

Download Datasheet for CAB.719

Download CAB.719 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Taoglas RF Cable Assemblies with:

• 100% Authentic Products for Wireless Applications

• Fast Global Shipping to USA, India, Australia, Europe & more

• Bulk Order Discounts and OEM Support Available

• Expert Technical Assistance for Seamless Integration

• Secure Online Ordering at www.xonelec.com

FAQs – CAB.719 RF Cable Assemblies by Taoglas

Q1. What frequency range does CAB.719 support?
It supports frequencies from DC up to 6 GHz.

Q2. Are these cables suitable for IoT applications?
Yes, they are ideal for IoT and wireless devices.

Q3. Can custom lengths be ordered?
Yes, custom lengths are available for specific requirements.

Q4. Does Xon Electronics offer global shipping?
Yes, we deliver to USA, India, Australia, Europe & more.

Conclusion

The CAB.719 RF Cable Assemblies by Taoglas deliver exceptional performance and reliability for RF signal transmission in various industries. As part of Taoglas’ high-quality Wire & Cable range, they are trusted globally for critical connectivity needs. Order now from Xon Electronics for worldwide delivery and technical support.

BTA40-600B Triacs by STMicroelectronics – Reliable Power Switching for AC Applications

The Triacs BTA40-600B by STMicroelectronics are high-performance Semiconductors designed for AC switching and phase control in industrial and consumer electronics. These robust Discrete Semiconductors deliver excellent thermal performance and high surge capability, making them a preferred choice in power control systems. As part of STMicroelectronics’ trusted range of Thyristors and Triacs, they ensure reliable operation in demanding environments.

In this blog, we’ll cover technical specifications, key features, applications, installation details, and how to download the datasheet or purchase from Xon Electronics.

Technical Specifications of BTA40-600B

• Manufacturer: STMicroelectronics

• Model: BTA40-600B

• Type: Triacs

• Repetitive Peak Off-State Voltage (VDRM): 600V

• RMS On-State Current (IT(RMS)): 40A

• Gate Trigger Current (IGT): 50mA

• Operating Temperature Range: -40°C to +125°C

• Package: TOP3 Insulated

• Category: Semiconductors, Discrete Semiconductors, Thyristors, Triacs

This Triac offers superior current handling and robust performance for AC load switching.

Key Features of BTA40-600B Triacs

• 40A RMS on-state current for high-power applications

• 600V voltage capability for AC mains control

• Insulated TOP3 package for enhanced safety and heat dissipation

• High surge capability for transient conditions

• Part of STMicroelectronics’ premium Semiconductors and Thyristors portfolio

The BTA40-600B Triacs by STMicroelectronics provide efficient and reliable AC power control for diverse applications.

Applications of BTA40-600B Triacs

• Light dimmers and fan speed controllers

• AC motor control systems

• Heating and temperature regulation equipment

• Solid-state relays and power regulators

• OEM designs utilizing Triacs for robust power switching solutions

These Discrete Semiconductors are essential in designs requiring precise AC load management.

Installation and Handling Overview

To integrate the BTA40-600B Triac:

• Mount securely using the TOP3 insulated package for proper heat transfer.

• Ensure appropriate heat sinking for high-current applications.

• Follow recommended gate trigger current specifications for reliable switching.

• Test under actual load conditions to validate thermal and electrical performance.

This Thyristor solution simplifies design in AC switching circuits.

Use Case Scenario: AC Motor Control System

Scenario: An industrial equipment manufacturer required durable Triacs for AC motor speed control systems.

Problem: Previous components failed under high surge currents and thermal stress.

Solution: The BTA40-600B Triacs by STMicroelectronics offered high current ratings and excellent thermal performance.

Result: Increased system reliability and reduced maintenance costs.

Download Datasheet for BTA40-600B

Download BTA40-600B Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine STMicroelectronics Thyristors and Triacs with:

• 100% Authentic Products for Power Control Applications

• Fast Global Shipping to USA, India, Australia, Europe & more

• OEM Discounts and Bulk Order Support

• Technical Assistance for Seamless Integration

• Secure Online Ordering at www.xonelec.com

FAQs – BTA40-600B Triacs by STMicroelectronics

Q1. What is the RMS on-state current for this Triac?
It supports 40A RMS.

Q2. Is the package insulated?
Yes, it features an insulated TOP3 package for safer handling.

Q3. Can this Triac handle high surge currents?
Yes, it has excellent surge current capability.

Q4. Does Xon Electronics offer global shipping?
Yes, we ship to USA, India, Australia, Europe & more.

Conclusion

The BTA40-600B Triacs by STMicroelectronics deliver reliable and efficient AC power switching for industrial and consumer applications. As premium Semiconductors in the Discrete Semiconductors and Thyristors category, they are trusted by engineers worldwide. Order now from Xon Electronics for global shipping and technical support.