IRFP31N50LPBF MOSFETs by Vishay – High-Power Switching with Superior Efficiency

The MOSFETs IRFP31N50LPBF by Vishay are high-voltage, N-channel MOSFETs designed for fast switching, low conduction losses, and reliable performance in demanding applications. As part of the Semiconductors, Discrete Semiconductors, Transistors, MOSFETs by Vishay range, these components are built with advanced process technology to handle high power while maintaining efficiency.

This blog covers their specifications, features, applications, and why Xon Electronics is your trusted global source.

Technical Specifications of IRFP31N50LPBF

• Manufacturer: Vishay

• Part Number: IRFP31N50LPBF

• Type: N-Channel MOSFET

• Drain-Source Voltage (Vds): 500V

• Continuous Drain Current (Id): 31A

• Rds(on): 0.12 O

• Total Gate Charge (Qg): 160 nC

• Package: TO-247AC

• Category: Semiconductors, Discrete Semiconductors, Transistors, MOSFETs by Vishay

These specifications make it ideal for high-power switching and conversion applications.

Key Features of IRFP31N50LPBF MOSFETs

• High Voltage Capability – 500V Vds for demanding circuits

• Low On-Resistance – Reduced conduction losses and heat generation

• Fast Switching Speed – Improves efficiency in high-frequency applications

• Robust Design – Withstands harsh operating conditions

• Lead-Free and RoHS Compliant – Environmentally friendly build

The IRFP31N50LPBF MOSFETs by Vishay offer an excellent balance between power handling and efficiency, making them a standout in the Semiconductors, Discrete Semiconductors, Transistors, MOSFETs by Vishay lineup.

Applications of IRFP31N50LPBF

This MOSFET is ideal for:

• Switch Mode Power Supplies (SMPS)

• High-Efficiency DC-DC Converters

• Motor Drives and Control Systems

• UPS and Inverter Circuits

• Renewable Energy Systems (Solar & Wind Inverters)

In all these cases, Semiconductors, Discrete Semiconductors, Transistors, MOSFETs by Vishay deliver the high power, reliability, and efficiency needed for modern electronics.

Installation and Usage Overview

When integrating into high-power designs:

1. Ensure adequate heat sinking for thermal management.

2. Use gate drivers with appropriate voltage and current handling.

3. Follow PCB layout guidelines for low inductance and reduced EMI.

Use Case Scenario: Solar Inverter Upgrade

Scenario: An energy company sought to improve the efficiency of its solar inverters.
Problem: Existing transistors had higher conduction losses, lowering output efficiency.
Solution: Replacing them with IRFP31N50LPBF MOSFETs by Vishay reduced power loss and increased energy yield.
Result: Improved inverter efficiency by over 3% and enhanced reliability.

Download Datasheet for IRFP31N50LPBF

Need full electrical characteristics, switching waveforms, or thermal performance data?

Download IRFP31N50LPBF Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics supplies genuine Semiconductors, Discrete Semiconductors, Transistors, MOSFETs by Vishay with:

• 100% Authentic Vishay Components
• Global Shipping – USA, India, Australia, Europe & more
• Bulk Discounts for OEMs and Distributors
• Technical Support for Power Applications
• Secure and Fast Ordering Process

Order today from www.xonelec.com for worldwide delivery of top-quality MOSFETs.

Conclusion

The IRFP31N50LPBF MOSFETs by Vishay combine high voltage, low Rds(on), and fast switching for efficient, reliable operation in power electronics. As part of the Semiconductors, Discrete Semiconductors, Transistors, MOSFETs by Vishay product family, they are a trusted choice for engineers in industrial, renewable, and high-performance applications. Available now from Xon Electronics with global shipping to USA, India, Australia, Europe, and beyond.

FAQs – IRFP31N50LPBF MOSFETs

Q1. What is the maximum drain-source voltage?
500V.

Q2. Is it suitable for high-frequency switching?
Yes, thanks to its fast switching speed and low gate charge.

Q3. What package is it available in?
TO-247AC.

Q4. Can I purchase it globally?
Yes, from www.xonelec.com with worldwide delivery.

IU0524SA Isolated DC/DC Converters by XP Power – Compact, Efficient Power Conversion for Demanding Applications

The Isolated DC/DC Converters IU0524SA by XP Power are high-performance solutions designed to deliver reliable voltage conversion in compact electronic systems. With 1.5kV isolation and regulated output, these converters are ideal for industrial, telecom, and embedded applications where performance and safety are paramount. As part of the Power, DC/DC Converters, Isolated DC/DC Converters by XP Power range, they combine efficiency, durability, and space-saving design.

In this blog, we’ll explore the product specifications, standout features, application scope, and why Xon Electronics is your trusted worldwide supplier.

Technical Specifications of IU0524SA

• Manufacturer: XP Power

• Part Number: IU0524SA

• Type: Isolated DC/DC Converter

• Input Voltage Range: 4.5V to 5.5V DC

• Output Voltage: 24V DC

• Output Power: 1W

• Isolation Voltage: 1.5 kV DC

• Package Type: SIP (Single Inline Package)

• Category: Power, DC/DC Converters, Isolated DC/DC Converters by XP Power

These specifications ensure stable, low-noise output for sensitive electronics.

Key Features of IU0524SA

• High Conversion Efficiency – Up to 80% for reduced energy loss

• Compact SIP Format – Fits easily into dense PCB layouts

• 1.5kV Isolation – Protects connected circuits and ensures safety

• Wide Temperature Range – Operates from -40°C to +100°C

• Regulated Output – Maintains voltage stability under varying loads

The IU0524SA Isolated DC/DC Converters by XP Power stand out in the Power, DC/DC Converters, Isolated DC/DC Converters by XP Power lineup for their balance of size and performance.

Applications of IU0524SA

This converter is suited for:

• Industrial Automation Systems

• Telecommunications Equipment

• Embedded Controllers

• Measurement and Testing Devices

• IoT and Remote Sensor Modules

In all these cases, Power, DC/DC Converters, Isolated DC/DC Converters by XP Power provide reliable performance and electrical isolation.

Installation Overview

The SIP package allows easy PCB mounting, reducing footprint and simplifying design. Connections are straightforward, with minimal external components required for operation.

Use Case Scenario: Remote Sensor Power Supply

Scenario: A remote IoT sensor required isolated 24V output from a 5V input source.
Problem: Non-isolated supplies created ground loop issues.
Solution: Installing the IU0524SA Isolated DC/DC Converters by XP Power solved grounding problems while delivering a clean, stable output.
Result: Increased sensor reliability and improved data accuracy.

Download Datasheet for IU0524SA

Need detailed electrical characteristics, pin layouts, or thermal derating curves?

Download IU0524SA Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Power, DC/DC Converters, Isolated DC/DC Converters by XP Power with:

• 100% Authentic XP Power Components
• Worldwide Shipping – USA, India, Australia, Europe & more
• Competitive Bulk Pricing for OEMs and Integrators
• Technical Expertise in Power Solutions
• Safe and Fast Online Ordering

Order now from www.xonelec.com for high-quality XP Power DC/DC converters shipped globally.

Conclusion

The IU0524SA Isolated DC/DC Converters by XP Power combine high efficiency, strong isolation, and compact size, making them an excellent choice for modern electronics. As part of the Power, DC/DC Converters, Isolated DC/DC Converters by XP Power range, they offer unmatched reliability for demanding applications. Available now from Xon Electronics with delivery to USA, India, Australia, Europe, and other countries.

FAQs – IU0524SA Isolated DC/DC Converters

Q1. What is the isolation voltage?
It provides 1.5 kV DC isolation.

Q2. Can it operate in harsh environments?
Yes, it works from -40°C to +100°C.

Q3. Is it suitable for embedded systems?
Yes, its compact SIP format is perfect for embedded designs.

Q4. Where can I buy it worldwide?
From www.xonelec.com, with global delivery to USA, India, Australia, Europe, and beyond.

ZB5AZ102 Switch Fixings by Schneider – Secure Mounting for Reliable Switch Performance

The Switch Fixings ZB5AZ102 by Schneider are high-quality mounting accessories designed to ensure secure installation and reliable operation of control switches in industrial and commercial applications. As part of the Electromechanical, Switches, Switch Accessories, Switch Fixings by Schneider range, they offer robust construction, easy installation, and compatibility with Schneider’s extensive control product lineup.

In this blog, we’ll cover the product specifications, standout features, key applications, and why Xon Electronics is your ideal global supplier.

Technical Specifications of ZB5AZ102

• Manufacturer: Schneider Electric

• Part Number: ZB5AZ102

• Type: Switch Fixing Collar

• Material: High-strength plastic with anti-corrosion properties

• Mounting Type: Panel mount

• Compatibility: Designed for Harmony XB5 series control switches

• Category: Electromechanical, Switches, Switch Accessories, Switch Fixings by Schneider

Key Features of ZB5AZ102 Switch Fixings

• Durable Construction – Made from premium-grade materials for long-lasting use

• Easy Installation – Designed for quick and secure mounting on panels

• Perfect Fit – Ensures proper alignment and stability for switch operation

• Corrosion-Resistant – Maintains integrity in challenging environments

• Optimized for Schneider Products – Seamless compatibility with Harmony XB5 switches

These benefits make the ZB5AZ102 Switch Fixings by Schneider a preferred choice in the Electromechanical, Switches, Switch Accessories, Switch Fixings by Schneider product category.

Applications of ZB5AZ102

This fixing collar is ideal for use in:

• Industrial Control Panels

• Machinery Operator Stations

• Electrical Cabinets

• HVAC Control Systems

• Process Automation Equipment

In all these applications, Electromechanical, Switches, Switch Accessories, Switch Fixings by Schneider ensure reliable switch installation and long-term stability.

Installation Overview

Basic Steps:

1. Prepare the panel cut-out according to the switch size.

2. Insert the fixing collar into position.

3. Secure the switch in the collar and tighten as required.

4. Connect wiring as per the switch specifications.

The precise design guarantees a firm hold, preventing switch misalignment or movement during operation.

Use Case Scenario: Factory Automation Panel

Scenario: A manufacturing plant needed to upgrade control panels with more durable switch mounts.
Problem: Existing mounts loosened over time, causing misalignment and operational issues.
Solution: The ZB5AZ102 Switch Fixings by Schneider provided secure, stable mounting with quick installation.
Result: Improved reliability, reduced downtime, and easier maintenance.

Download Datasheet for ZB5AZ102

Need detailed dimensions, compatibility charts, or assembly instructions?

Download ZB5AZ102 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics supplies genuine Electromechanical, Switches, Switch Accessories, Switch Fixings by Schneider with:

• 100% Authentic Schneider Products
• Global Shipping – USA, India, Australia, Europe & more
• Volume Discounts for OEMs and Panel Builders
• Expert Technical Advice
• Secure and Fast Online Ordering

Order now from www.xonelec.com for high-quality Schneider switch accessories delivered worldwide.

Conclusion

The ZB5AZ102 Switch Fixings by Schneider deliver the secure mounting, compatibility, and durability needed for industrial and commercial control systems. As part of the Electromechanical, Switches, Switch Accessories, Switch Fixings by Schneider lineup, they ensure your switches stay firmly in place for optimal performance. Available from Xon Electronics with worldwide shipping to USA, India, Australia, Europe, and beyond.

FAQs – ZB5AZ102 Switch Fixings

Q1. Which switch series is it compatible with?
It is designed for Schneider’s Harmony XB5 series switches.

Q2. Can it be used in industrial environments?
Yes, its durable and corrosion-resistant design is ideal for industrial settings.

Q3. Is it easy to install?
Yes, it is designed for quick and secure installation.

Q4. Where can I buy it globally?
From www.xonelec.com, with delivery to USA, India, Australia, Europe, and other regions.

TDA7851L Audio Amplifiers by JSMSEMI

Introduction

The Audio Amplifiers TDA7851L by JSMSEMI are advanced automotive-grade audio solutions designed to deliver superior sound quality with high efficiency. Built using modern semiconductor technology, these Audio Amplifiers provide exceptional power output while maintaining low distortion, making them ideal for car audio and multimedia systems. These devices fall under Semiconductors, Integrated Circuits - ICs, Audio ICs, Audio Amplifiers and are engineered for robust performance in demanding environments.

Technical Specifications

• Manufacturer: JSMSEMI

• Product Type: Audio Amplifiers

• Category: Semiconductors, Integrated Circuits - ICs, Audio ICs, Audio Amplifiers

• Output Power: Up to 4 x 50W

• Operating Voltage: 8V to 18V

• Total Harmonic Distortion (THD): = 0.03%

• Operating Temperature Range: -40°C to +150°C

• Package: Multiwatt-15

• Application Areas: Automotive audio, infotainment systems, multimedia amplifiers

Key Features

• High output power with minimal distortion.

• Excellent efficiency and low heat generation.

• Wide operating voltage range for automotive applications.

• Integrated diagnostics for system reliability.

• Low noise design for premium sound reproduction.

Applications

• Car audio head units

• In-vehicle entertainment systems

• Multimedia speaker systems

• Professional automotive sound systems

• Public announcement systems in vehicles

Circuit Diagram

(Insert diagram showing the application of the TDA7851L in a 4-channel audio system.)

Use Cases

1. Car Audio Systems: Enhance the in-vehicle music experience with high-fidelity sound.

2. Automotive Infotainment: Improve multimedia audio clarity.

3. Custom Vehicle Installations: Suitable for professional automotive audio upgrades.

Also Available from Other Manufacturers

• STMicroelectronics

Datasheet Download Information

For detailed electrical characteristics, pin configurations, and application notes, download the official TDA7851L Audio Amplifiers by JSMSEMI datasheet from our website.

Purchasing Information

X-ON Electronics offers the TDA7851L Audio Amplifiers for immediate global shipping, including to the USA, India, Australia, Europe, and many other countries. Competitive pricing, bulk discounts, and reliable sourcing ensure you get genuine components quickly.

Conclusion

The TDA7851L Audio Amplifiers by JSMSEMI are a high-performance choice for automotive and multimedia audio systems. With exceptional sound quality, low distortion, and robust design, they are a dependable solution in Semiconductors, Integrated Circuits - ICs, Audio ICs, Audio Amplifiers applications.

TL082CD Operational Amplifiers - Op Amps by STMicroelectronics

The Operational Amplifiers - Op Amps TL082CD by STMicroelectronics are precision dual J-FET input devices designed to deliver low noise, low distortion, and fast slew rates for high-quality analog signal processing. Widely used in the Semiconductors, Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps category, they provide exceptional performance in audio, measurement, and industrial control systems.

Technical Specifications of TL082CD

• Manufacturer: STMicroelectronics

• Part Number: TL082CD

• Category: Semiconductors, Integrated Circuits - ICs, Amplifier ICs, Operational Amplifiers - Op Amps

• Amplifier Type: Dual J-FET input operational amplifier

• Supply Voltage Range: ±3V to ±18V

• Slew Rate: 13V/µs (typical)

• Gain Bandwidth Product: 3MHz

• Input Bias Current: 65pA (typical)

• Package: SOIC-8

• Operating Temperature Range: -40°C to +85°C

Key Features of TL082CD

• Low input bias and offset currents for high precision

• High slew rate for quick transient response

• Low noise and distortion for superior signal integrity

• Wide common-mode voltage range

• Compact SOIC-8 package for PCB design flexibility

Applications of TL082CD

• Professional audio preamplifiers and equalizers

• Active filter circuits

• Sensor signal conditioning

• Industrial process control systems

• Oscillators and waveform generators

Wiring and Connection Overview

When using the TL082CD Operational Amplifiers - Op Amps in your design:

• Keep input leads short to minimize interference

• Use decoupling capacitors close to supply pins

• Design feedback networks for optimal stability

• Operate within specified voltage limits

Use Case Scenario – Industrial Sensor Signal Conditioning

Problem: Need an accurate, low-noise op amp for industrial sensors.

Solution: The TL082CD Operational Amplifiers - Op Amps deliver high accuracy, low offset, and stable operation in harsh environments.

Result: Improved sensor signal fidelity and reliable process control.

Download Datasheet for TL082CD

[Download TL082CD Datasheet from Xon Electronics]

Also available from other manufacturers

• Texas Instruments

Why Buy from Xon Electronics?

• 100% genuine parts
• Worldwide shipping to USA, India, Australia, Europe, and more
• Competitive prices
• Access to full datasheets
• Secure checkout process

FAQs – TL082CD Operational Amplifiers - Op Amps

Q1. Is TL082CD good for audio use?
Yes, it offers low noise and distortion, making it ideal for audio applications.

Q2. Can it operate from a single supply?
Yes, with proper biasing techniques.

Q3. What package type is TL082CD?
It comes in an SOIC-8 package.

Q4. Do you provide global delivery?
Yes, we ship to USA, India, Australia, Europe, and other regions.

Conclusion

The TL082CD Operational Amplifiers - Op Amps by STMicroelectronics are a trusted choice for high-performance analog applications. In the Semiconductors, Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps segment, they deliver outstanding precision, low noise, and durability for diverse engineering needs.

TL072CN Operational Amplifiers - Op Amps by HGSEMI

The Operational Amplifiers - Op Amps TL072CN by HGSEMI are high-performance dual J-FET input amplifiers designed for precision signal processing. With low noise, low distortion, and a high slew rate, they are a popular choice in audio equipment, instrumentation, and industrial applications. Belonging to the Semiconductors, Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps category, they ensure excellent accuracy and stability for a wide range of designs.

Technical Specifications of TL072CN

• Manufacturer: HGSEMI

• Part Number: TL072CN

• Category: Semiconductors, Integrated Circuits - ICs, Amplifier ICs, Operational Amplifiers - Op Amps

• Amplifier Type: Dual J-FET input op amp

• Supply Voltage Range: ±3V to ±18V

• Slew Rate: 13V/µs

• Gain Bandwidth Product: 3MHz

• Input Bias Current: 65pA

• Package: PDIP-8

• Operating Temperature Range: -40°C to +85°C

Key Features of TL072CN

• Low noise and distortion for superior audio clarity

• High slew rate for fast transient response

• Wide bandwidth for precision applications

• Very low input bias and offset currents

• Standard PDIP-8 package for easy PCB integration

Applications of TL072CN

• Professional audio mixers and amplifiers

• Active filter designs

• Industrial sensor signal processing

• Precision oscillators and waveform generators

• Laboratory test and measurement equipment

Wiring and Connection Overview

When integrating the TL072CN Operational Amplifiers - Op Amps into your circuit:

• Place decoupling capacitors near the power supply pins

• Keep signal traces short to minimize interference

• Operate within the recommended voltage range

• Design the feedback network to ensure stability

Use Case Scenario – Professional Audio Mixer

Problem: Need a low-noise, high-performance op amp for audio mixing.

Solution: The TL072CN Operational Amplifiers - Op Amps by HGSEMI provide minimal noise and distortion, ensuring pristine sound quality.

Result: Enhanced audio clarity and reliable long-term performance.

Download Datasheet for TL072CN

[Download TL072CN Datasheet from Xon Electronics]

Also available from other manufacturers

• STMicroelectronics

Why Buy from Xon Electronics?

• 100% original parts
• Worldwide delivery to USA, India, Australia, Europe, and beyond
• Best price guarantee
• Technical datasheets available
• Safe and secure transactions

FAQs – TL072CN Operational Amplifiers - Op Amps

Q1. Is the TL072CN suitable for audio applications?
Yes, it’s widely used in professional audio for its low noise and distortion.

Q2. Can it run on a single supply voltage?
Yes, with proper biasing it can operate from a single supply.

Q3. What is its typical package type?
It comes in a PDIP-8 package.

Q4. Do you ship internationally?
Yes, we ship to USA, India, Australia, Europe, and other countries.

Conclusion

The TL072CN Operational Amplifiers - Op Amps by HGSEMI deliver exceptional performance for audio, industrial, and measurement applications. As a top choice in the Semiconductors, Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps category, they ensure precision and reliability in every project.

TL072CD Operational Amplifiers - Op Amps by STMicroelectronics

The Operational Amplifiers - Op Amps TL072CD by STMicroelectronics are high-performance dual J-FET input Semiconductors designed for low noise, high slew rate, and exceptional audio performance. As part of the Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps family, they are ideal for audio, instrumentation, and industrial applications requiring precision and stability.

Technical Specifications of TL072CD

• Manufacturer: STMicroelectronics

• Part Number: TL072CD

• Category: Semiconductors, Integrated Circuits - ICs, Amplifier ICs, Operational Amplifiers - Op Amps

• Amplifier Type: Dual J-FET input Op Amp

• Supply Voltage Range: ±3V to ±18V

• Slew Rate: 13V/µs

• Bandwidth (GBW): 3MHz

• Input Bias Current: 65pA

• Package: SOIC-8

• Operating Temperature Range: -40°C to +85°C

Key Features of TL072CD

• Low noise for superior audio performance

• High slew rate for fast transient response

• Wide bandwidth for precise signal processing

• Low input bias and offset currents

• Compact SOIC-8 package for space efficiency

Applications of TL072CD

• Professional audio equipment and mixers

• Active filters and equalizers

• Sensor and signal conditioning systems

• Oscillators and waveform generators

• Industrial process control systems

Wiring and Connection Overview

When using TL072CD Operational Amplifiers - Op Amps:

• Decouple the power supply pins with bypass capacitors

• Maintain input signals within the specified common-mode range

• Use proper grounding to reduce noise interference

• Select feedback components as per application requirements

Use Case Scenario – Audio Mixer Application

Problem: Need a low-distortion, low-noise op amp for high-fidelity audio mixing.

Solution: The TL072CD Operational Amplifiers - Op Amps deliver exceptional clarity with minimal distortion.

Result: Enhanced audio quality with stable long-term performance.

Download Datasheet for TL072CD

[Download TL072CD Datasheet from Xon Electronics]

Also available from other manufacturers

• Texas Instruments

Why Buy from Xon Electronics?

• 100% Genuine STMicroelectronics components
• Global delivery to USA, India, Australia, Europe, and more
• Competitive pricing
• Expert technical support
• Secure transactions

FAQs – TL072CD Operational Amplifiers - Op Amps

Q1. Is TL072CD suitable for audio applications?
Yes, it offers low noise and high slew rate, making it ideal for audio use.

Q2. What is the typical input bias current?
Around 65pA.

Q3. Can TL072CD operate with a single power supply?
Yes, with appropriate biasing.

Q4. Does Xon Electronics provide global shipping?
Yes, to USA, India, Australia, Europe, and other regions.

Conclusion

The TL072CD Operational Amplifiers - Op Amps by STMicroelectronics are a versatile choice for high-quality audio, industrial control, and instrumentation circuits. Belonging to the Semiconductors, Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps category, they ensure precision and performance in every application.

TL072ACD Operational Amplifiers - Op Amps by STMicroelectronics

The Operational Amplifiers - Op Amps TL072ACD by STMicroelectronics are high-performance dual J-FET input Semiconductors designed for superior audio quality and precision signal processing. Belonging to the Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps category, they are widely used in professional audio, instrumentation, and control applications.

Technical Specifications of TL072ACD

• Manufacturer: STMicroelectronics

• Part Number: TL072ACD

• Category: Semiconductors, Integrated Circuits - ICs, Amplifier ICs, Operational Amplifiers - Op Amps

• Amplifier Type: Dual J-FET input Op Amp

• Supply Voltage Range: ±3V to ±18V

• Slew Rate: 13V/µs

• Bandwidth (GBW): 3MHz

• Input Bias Current: 65pA

• Package: SOIC-8

• Operating Temperature Range: -40°C to +85°C

Key Features of TL072ACD

• Low input bias and offset currents

• High slew rate for fast signal response

• Wide bandwidth for accurate audio reproduction

• Low noise for superior performance in sensitive applications

• SOIC-8 package for compact PCB designs

Applications of TL072ACD

• Professional audio preamplifiers and mixers

• Active filters and equalizers

• Sensor signal conditioning

• Oscillators and waveform generators

• Industrial process control equipment

Wiring and Connection Overview

When using TL072ACD Operational Amplifiers - Op Amps:

• Properly decouple supply pins with capacitors

• Follow recommended PCB layout for low-noise operation

• Ensure input signals remain within common-mode range

• Use feedback resistors as per circuit requirements

Use Case Scenario – Audio Preamplifier

Problem: Need a low-noise, high-slew rate amplifier for audio signals.

Solution: The TL072ACD Operational Amplifiers - Op Amps deliver superior audio clarity with minimal distortion.

Result: Professional sound quality with long-term stability.

Download Datasheet for TL072ACD

?? [Download TL072ACD Datasheet from Xon Electronics]

Also available from other manufacturers

• Texas Instruments

Why Buy from Xon Electronics?

• 100% Genuine STMicroelectronics components
• Global delivery to USA, India, Australia, Europe, and more
• Competitive pricing
• Expert technical support
• Secure transactions

FAQs – TL072ACD Operational Amplifiers - Op Amps

Q1. Is TL072ACD suitable for audio circuits?
Yes, it offers low noise and high slew rate, ideal for audio use.

Q2. What is its input bias current?
Approximately 65pA.

Q3. Can it operate with a single supply?
Yes, with proper biasing.

Q4. Does Xon Electronics ship worldwide?
Yes, to USA, India, Australia, Europe, and other countries.

Conclusion

The TL072ACD Operational Amplifiers - Op Amps by STMicroelectronics are an excellent choice for high-fidelity audio, precision instrumentation, and control circuits. Part of the Semiconductors, Integrated Circuits - ICs, Amplifier ICs, and Operational Amplifiers - Op Amps family, they offer performance and reliability you can trust.

TIP42 Bipolar Transistors - BJT by Central Semiconductor

The Bipolar Transistors - BJT TIP42 by Central Semiconductor are high-performance PNP power Semiconductors widely used for amplification and switching. Classified under Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT, they offer reliable performance for industrial and consumer electronics.

Technical Specifications of TIP42

• Manufacturer: Central Semiconductor

• Part Number: TIP42

• Category: Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT

• Transistor Type: PNP

• Collector-Emitter Voltage (Vce): 100V

• Collector Current (Ic): 6A

• Power Dissipation: 65W

• Package: TO-220

• Operating Temperature Range: -65°C to +150°C

Key Features of TIP42

• High current handling capability for demanding loads

• Low saturation voltage for enhanced efficiency

• Rugged TO-220 package for heat dissipation

• Versatile for both linear and switching applications

• Wide temperature range for harsh environments

Applications of TIP42

• Audio amplifier stages

• Motor driver circuits

• Relay control and automation systems

• Power regulation in industrial equipment

• General-purpose PNP transistor applications

Wiring and Connection Overview

When using TIP42 Bipolar Transistors - BJT:

• Pinout: Base (B), Collector (C), Emitter (E)

• Use correct biasing resistors for the base

• Ensure proper load current within specified ratings

• Use heatsinks for continuous high-power operation

Use Case Scenario – Audio Power Amplifier

Problem: A need for a reliable PNP transistor in a high-fidelity audio system.

Solution: The TIP42 Bipolar Transistors - BJT provide low distortion, high current handling, and excellent thermal stability.

Result: Clear, powerful audio output with long-term reliability.

Download Datasheet for TIP42

[Download TIP42 Datasheet from Xon Electronics]

Also available from other manufacturers

• ON Semiconductor

Why Buy from Xon Electronics?

• 100% Genuine Central Semiconductor components
• Global delivery to USA, India, Australia, Europe, and more
• Competitive market pricing
• Expert technical assistance
• Secure and trusted transactions

FAQs – TIP42 Bipolar Transistors - BJT

Q1. What is the maximum collector current for TIP42?
6A continuous.

Q2. Can it be used for switching power supplies?
Yes, with appropriate design parameters.

Q3. Is heatsinking necessary for TIP42?
Yes, for high-power operations.

Q4. Does Xon Electronics provide worldwide shipping?
Yes, including USA, India, Australia, Europe, and other countries.

Conclusion

The TIP42 Bipolar Transistors - BJT by Central Semiconductor deliver dependable performance in high-current PNP transistor applications. Belonging to the Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT family, they are an ideal choice for industrial and consumer electronics.

TIP31B Bipolar Transistors - BJT by Central Semiconductor

The Bipolar Transistors - BJT TIP31B by Central Semiconductor are highly reliable Semiconductors designed for general-purpose amplification and switching applications. Falling under the category of Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT, these NPN transistors are ideal for both industrial and consumer electronics.

Technical Specifications of TIP31B

• Manufacturer: Central Semiconductor

• Part Number: TIP31B

• Category: Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT

• Transistor Type: NPN

• Collector-Emitter Voltage (Vce): 80V

• Collector Current (Ic): 3A

• Power Dissipation: 40W

• Package: TO-220

• Operating Temperature Range: -65°C to +150°C

Key Features of TIP31B

• High collector current capability

• Low saturation voltage for efficiency

• Rugged TO-220 package for heat management

• Wide operating temperature range

• Suitable for switching and linear applications

Applications of TIP31B

• Audio power amplifiers

• Motor driver circuits

• Power switching regulators

• Relay control and solenoid drivers

• Signal amplification in industrial equipment

Wiring and Connection Overview

When connecting the TIP31B Bipolar Transistors - BJT:

• Pin configuration: Base (B), Collector (C), and Emitter (E)

• Use appropriate base resistors for biasing

• Ensure load and power ratings are within limits

• Attach a heatsink for high-load conditions

Use Case Scenario – Motor Control

Problem: Need for a reliable transistor in a DC motor driver.

Solution: The TIP31B Bipolar Transistors - BJT provide high current handling and fast switching performance.

Result: Improved motor control with low heat generation and long-term reliability.

Download Datasheet for TIP31B

[Download TIP31B Datasheet from Xon Electronics]

Also available from other manufacturers

• NTE

Why Buy from Xon Electronics?

• 100% Genuine Central Semiconductor products
• Worldwide shipping – USA, India, Australia, Europe and more
• Competitive pricing
• Expert guidance and technical support
• Secure transactions

FAQs – TIP31B Bipolar Transistors - BJT

Q1. What is the maximum continuous current for TIP31B?
3A.

Q2. Can it be used in switching power supplies?
Yes, with proper design consideration.

Q3. Is heatsinking necessary?
Recommended for high-power loads.

Q4. Does Xon Electronics ship globally?
Yes, including USA, India, Australia, Europe, and other countries.

Conclusion

The TIP31B Bipolar Transistors - BJT by Central Semiconductor are a robust, cost-effective choice for both amplification and switching applications. Belonging to the Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT family, they deliver consistent performance in demanding environments.