Introduction

The Headers & Wire Housings PAP-04V-S by JST are compact and reliable interconnect components designed for efficient wire-to-board connectivity in modern electronic systems. As part of Connectors, Headers & Wire Housings, this product ensures secure mating, consistent electrical performance, and long-lasting durability. The PAP-04V-S series is widely used by engineers for its ease of use and dependable functionality in various applications.

Technical Specifications of PAP-04V-S Headers & Wire Housings

General Specifications

• Manufacturer: JST
• Part Number: PAP-04V-S
• Product Type: Header / Wire Housing
• Category: Connectors, Headers & Wire Housings
• Number of Positions: 4
• Mounting Type: Through Hole / PCB Mount
• Pitch: 2.0 mm (typical JST PA series)
• Housing Material: High-quality thermoplastic
• Connector Type: Wire-to-board

These specifications make PAP-04V-S a reliable component in Connectors, Headers & Wire Housings applications.

Key Features of PAP-04V-S Headers & Wire Housings

Design and Performance Benefits

• Secure and stable wire-to-board connection

• Compact design for space-constrained PCBs

• Easy insertion and removal of terminals

• Durable construction for long-term use

• High reliability across Connectors, Headers & Wire Housings applications

The PAP-04V-S Headers & Wire Housings by JST are designed to meet the needs of modern electronic designs.

Applications of PAP-04V-S Headers & Wire Housings

Common Use Cases

• Consumer electronics devices

• Industrial control systems

• Power supply modules

• Communication equipment

• Systems requiring Connectors, Headers & Wire Housings

These use cases highlight the versatility of PAP-04V-S in Connectors, Headers & Wire Housings across industries.

Wiring and Connection Overview

Installation Guidelines

• Crimp JST-compatible terminals onto wires

• Insert terminals into the PAP-04V-S housing

• Align housing with PCB header

• Ensure proper locking for secure connection

Following proper installation ensures optimal performance in Connectors, Headers & Wire Housings systems.

Use Case Example: Embedded Control System

Practical Implementation

Application: Embedded system PCB
Challenge: Compact and reliable connectivity
Solution: PAP-04V-S Headers & Wire Housings by JST
Result: Efficient space usage with stable electrical performance

This example demonstrates the effectiveness of PAP-04V-S in Connectors, Headers & Wire Housings applications.

Datasheet Information

For complete electrical characteristics, dimensions, and compliance details, refer to the official JST datasheet available through authorized distributors.

Why Buy PAP-04V-S Headers & Wire Housings from XON?

Purchasing PAP-04V-S Headers & Wire Housings by JST from
https://www.xonelec.com/ (www.xonelec.com, x-on electronics, or xon electronics) ensures:

• 100% genuine JST components

• Competitive pricing for bulk orders

• Fast global shipping

• Reliable technical and customer support

Order today for trusted Connectors, Headers & Wire Housings solutions.

FAQs – PAP-04V-S Headers & Wire Housings

What is PAP-04V-S used for?

It is used for secure wire-to-board connections in compact electronic designs.

Is it compatible with JST terminals?

Yes, it is designed for use with JST PA series terminals.

Can it be used in industrial applications?

Yes, it is suitable for both industrial and commercial environments.

What is the pitch of PAP-04V-S?

It typically features a 2.0 mm pitch.

Where can I buy PAP-04V-S online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The PAP-04V-S Headers & Wire Housings by JST offer a compact, durable, and efficient solution for wire-to-board connectivity. As a reliable component in Connectors, Headers & Wire Housings, it is ideal for engineers seeking performance and long-term reliability in electronic systems.

SMBJ30A TVS Diodes – Buy Online at XON

Introduction

The ESD Protection Diodes / TVS Diodes SMBJ30A by Jingdao are designed to protect sensitive electronic circuits from voltage spikes and electrostatic discharge. As part of Circuit Protection, ESD Protection Diodes / TVS Diodes, they play a crucial role in enhancing system reliability.

These diodes offer fast response times and efficient transient suppression, making the SMBJ30A ESD Protection Diodes / TVS Diodes ideal for a wide range of applications.

Technical Specifications of SMBJ30A

Manufacturer: Jingdao
Part Number: SMBJ30A
Component Type: ESD Protection Diodes / TVS Diodes
Category: Circuit Protection, ESD Protection Diodes / TVS Diodes
Voltage Rating: 30V
Mounting Type: Surface Mount
Application: Transient voltage suppression

The SMBJ30A ESD Protection Diodes / TVS Diodes by DOWO are built for high performance in Circuit Protection, ESD Protection Diodes / TVS Diodes applications.

Key Features of SMBJ30A

Fast Response Time

The SMBJ30A ESD Protection Diodes / TVS Diodes by DOWO react instantly to voltage spikes.

High Surge Capability

These diodes handle high transient currents effectively.

Reliable Protection

The SMBJ30A ESD Protection Diodes / TVS Diodes ensure consistent circuit safety.

Compact Design

As part of Circuit Protection, ESD Protection Diodes / TVS Diodes, they are ideal for compact PCB layouts.

Durable Performance

The SMBJ30A ESD Protection Diodes / TVS Diodes by Jingdao are designed for long-term reliability.

Applications of SMBJ30A

The SMBJ30A ESD Protection Diodes / TVS Diodes by Jingdao are used in:

• Consumer electronics

• Industrial systems

• Communication equipment

• Power supplies

• Automotive electronics

• Data protection circuits

These applications depend on high-quality Circuit Protection, ESD Protection Diodes / TVS Diodes for protection and performance.

Advantages of Using SMBJ30A

• Fast transient suppression

• High surge handling capability

• Reliable circuit protection

• Compact and efficient design

• Proven performance in Circuit Protection, ESD Protection Diodes / TVS Diodes

The SMBJ30A ESD Protection Diodes / TVS Diodes are an essential component for safeguarding electronics.

Also Available from Other Manufacturers

The SMBJ30A ESD Protection Diodes / TVS Diodes are also available from:

Youtai, Taisko, HXY MOS, SLKORMICRO, MSKSEMI, Liown, TWGMC, GOODWORK, SUNMATE, ZHIDE, FOSAN, Ruilongyuan, ElecSuper, DOWO, PAKER Microelectronics, TECH PUBLIC, amsem, SETfuse, FTR, SEMIWARE, SURGING, Microdiode Electronics, YFW Electronics, Weida Semiconductor, AnBon, Changjing Electronics Technology, Starsea, Yageo, Bourne, Good-Ark, Littelfuse, Bourns, Vishay, Taiwan Semiconductor, Semtech

Download Datasheet for SMBJ30A

Download the complete SMBJ30A Datasheet from XON Electronics to explore full technical specifications and protection details.

Why Buy from XON Electronics?

XON Electronics offers genuine Circuit Protection, ESD Protection Diodes / TVS Diodes, including the SMBJ30A ESD Protection Diodes / TVS Diodes by Jingdao.

Benefits include:

• Authentic components

• Competitive pricing

• Wide inventory

• Fast delivery

• Trusted sourcing

Visit https://www.xonelec.com/ to explore more products.

Conclusion

The SMBJ30A ESD Protection Diodes / TVS Diodes by Jingdao provide robust and reliable protection against voltage transients. As part of the Circuit Protection, ESD Protection Diodes / TVS Diodes category, they are essential for ensuring circuit safety and performance.

They are a dependable choice for modern electronic designs requiring effective protection.

FAQs – SMBJ30A TVS Diodes

What is the SMBJ30A used for?

It is used to protect electronic circuits from voltage spikes and ESD events.

Which category does this product belong to?

It belongs to Circuit Protection, ESD Protection Diodes / TVS Diodes.

Who manufactures the SMBJ30A diode?

It is manufactured by Jingdao.

What are the key features of this diode?

It offers fast response, high surge capacity, and reliable protection.

Where can I buy SMBJ30A TVS diodes?

You can purchase them from XON Electronics.

Introduction

The Headers & Wire Housings EHR-5 by JST are high-quality interconnect components designed to deliver reliable and secure wire-to-board connections. As a trusted solution within Connectors, Headers & Wire Housings, this product ensures stable electrical performance and durability in demanding applications. Widely used by engineers, the EHR-5 series offers compact design, easy installation, and consistent reliability across various industries.

Technical Specifications of EHR-5 Headers & Wire Housings

General Specifications

• Manufacturer: JST
• Part Number: EHR-5
• Product Type: Header / Wire Housing
• Category: Connectors, Headers & Wire Housings
• Number of Positions: 5
• Mounting Type: Through Hole / PCB Mount
• Pitch: 2.5 mm (typical JST EH series)
• Housing Material: High-quality thermoplastic
• Connector Type: Wire-to-board

These specifications make EHR-5 a dependable choice in Connectors, Headers & Wire Housings applications.

Key Features of EHR-5 Headers & Wire Housings

Design and Performance Benefits

• Secure and stable electrical connections

• Compact size suitable for space-limited designs

• Easy insertion and removal of wires

• Durable material for long operational life

• High reliability in Connectors, Headers & Wire Housings applications

The EHR-5 Headers & Wire Housings by JST are engineered to meet modern electronic design requirements.

Applications of EHR-5 Headers & Wire Housings

Common Use Cases

• Consumer electronics

• Industrial control systems

• Power supply units

• Communication devices

• Equipment requiring Connectors, Headers & Wire Housings

These applications demonstrate the versatility of EHR-5 in Connectors, Headers & Wire Housings across industries.

Wiring and Connection Overview

Installation Guidelines

• Crimp JST-compatible terminals onto wires

• Insert terminals into the EHR-5 housing

• Align with PCB header for correct placement

• Ensure proper locking to avoid disconnection

Proper installation ensures long-term performance in Connectors, Headers & Wire Housings systems.

Use Case Example: Power Supply Module

Practical Implementation

Application: Power supply PCB
Challenge: Reliable and compact wire-to-board connection
Solution: EHR-5 Headers & Wire Housings by JST
Result: Stable connection with easy maintenance

This use case highlights the efficiency of EHR-5 in Connectors, Headers & Wire Housings.

Datasheet Information

For detailed electrical specifications, mechanical drawings, and compliance data, refer to the official JST datasheet available through authorized distributors.

Why Buy EHR-5 Headers & Wire Housings from XON?

Purchasing EHR-5 Headers & Wire Housings by JST from
https://www.xonelec.com/ (www.xonelec.com, x-on electronics, or xon electronics) ensures:

• 100% genuine JST products

• Competitive pricing and bulk availability

• Fast global delivery

• Dedicated technical and customer support

Order today for trusted Connectors, Headers & Wire Housings solutions.

FAQs – EHR-5 Headers & Wire Housings

What is EHR-5 used for?

It is used for wire-to-board electrical connections in electronic circuits.

Is EHR-5 compatible with JST terminals?

Yes, it is designed for use with JST EH series terminals.

Can it be used in industrial applications?

Yes, it is suitable for both industrial and commercial applications.

What is the pitch of this connector?

It typically has a 2.5 mm pitch.

Where can I buy EHR-5 online?

You can purchase it from www.xonelec.com with worldwide shipping.

Conclusion

The EHR-5 Headers & Wire Housings by JST provide a reliable, compact, and efficient solution for wire-to-board connectivity. As a key component in Connectors, Headers & Wire Housings, it is ideal for engineers seeking durability, performance, and ease of use in electronic systems.

Introduction

The Standard LEDs - Through Hole WP57EGW by Kingbright are high-performance LED emitters designed for reliable and efficient light output in a wide range of electronic applications. As a trusted product within Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole, this component delivers consistent brightness, long operational life, and easy integration into circuit designs. Engineers and designers widely prefer these LEDs for their durability and stable performance across various environments.

Technical Specifications of WP57EGW Standard LEDs - Through Hole

General Specifications

• Manufacturer: Kingbright
• Part Number: WP57EGW
• Product Type: Standard LED – Through Hole
• Category: Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole
• Mounting Type: Through Hole
• Lens Type: Clear / Diffused (as per variant)
• Emission Color: Green
• Forward Voltage: Typical LED operating range
• Viewing Angle: Wide viewing angle for visibility

These specifications make WP57EGW a reliable choice within Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole applications.

Key Features of WP57EGW Standard LEDs - Through Hole

Design and Performance Benefits

• High brightness and consistent light output

• Long lifespan with low power consumption

• Easy PCB mounting with through-hole design

• Durable construction for industrial use

• Reliable performance across Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole applications

The WP57EGW LED by Kingbright ensures dependable illumination in both commercial and industrial systems.

Applications of WP57EGW Standard LEDs - Through Hole

Common Use Cases

• Indicator lights in electronic devices

• Industrial control panels

• Consumer electronics displays

• Signal and status indication systems

• Applications requiring Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole

These use cases highlight the versatility of WP57EGW LEDs in modern electronic designs.

Wiring and Connection Overview

Installation Guidelines

• Insert LED leads into PCB through-holes

• Ensure correct polarity (anode and cathode alignment)

• Solder securely for stable connection

• Use appropriate current-limiting resistor

Proper installation ensures optimal performance in Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole systems.

Use Case Example: Status Indicator Panel

Practical Implementation

Application: Industrial equipment panel
Challenge: Clear and reliable visual indication
Solution: WP57EGW Standard LEDs - Through Hole by Kingbright
Result: Bright, long-lasting, and energy-efficient indication

This example demonstrates how WP57EGW enhances systems within Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole.

Datasheet Information

For complete electrical characteristics, luminous intensity data, and mechanical dimensions, refer to the official Kingbright datasheet available through authorized distributors.

Why Buy WP57EGW Standard LEDs - Through Hole from XON?

Purchasing WP57EGW Standard LEDs - Through Hole by Kingbright from
https://www.xonelec.com/ (www.xonelec.com, x-on electronics, or xon electronics) ensures:

• 100% genuine Kingbright products

• Competitive pricing for bulk orders

• Fast worldwide shipping

• Reliable customer and technical support

Order today for trusted Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole solutions.

FAQs – WP57EGW Standard LEDs - Through Hole

What is the WP57EGW LED used for?

It is commonly used for indication and lighting in electronic circuits.

Is this LED suitable for industrial applications?

Yes, it is designed for both industrial and commercial use.

Does it require additional components?

Yes, a current-limiting resistor is required for safe operation.

Is it compatible with standard PCBs?

Yes, the through-hole design ensures easy compatibility.

Where can I buy this LED online?

You can purchase it from www.xonelec.com with global shipping.

Conclusion

The WP57EGW Standard LEDs - Through Hole by Kingbright provide a reliable, efficient, and cost-effective lighting solution. As part of Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - Through Hole, it is ideal for engineers seeking durability, brightness, and ease of integration.

P6SMB6.8A TVS Diodes – Buy Online at XON

Introduction

The ESD Protection Diodes / TVS Diodes P6SMB6.8A by DOWO are essential components designed to protect electronic circuits from voltage transients and electrostatic discharge. As part of Circuit Protection, ESD Protection Diodes / TVS Diodes, they ensure the safety and longevity of sensitive devices.

With fast response times and robust protection capabilities, the P6SMB6.8A ESD Protection Diodes / TVS Diodes are widely used in modern electronic systems.

Technical Specifications of P6SMB6.8A

Manufacturer: DOWO
Part Number: P6SMB6.8A
Component Type: ESD Protection Diodes / TVS Diodes
Category: Circuit Protection, ESD Protection Diodes / TVS Diodes
Voltage Rating: 6.8V
Mounting Type: Surface Mount
Application: Transient voltage suppression

The P6SMB6.8A ESD Protection Diodes / TVS Diodes by DOWO are engineered for reliable operation in Circuit Protection, ESD Protection Diodes / TVS Diodes applications.

Key Features of P6SMB6.8A

Fast Response Time

The P6SMB6.8A ESD Protection Diodes / TVS Diodes by DOWO react instantly to voltage spikes.

Effective ESD Protection

These diodes protect sensitive components from electrostatic discharge.

High Reliability

The P6SMB6.8A ESD Protection Diodes / TVS Diodes ensure consistent and dependable performance.

Compact Design

As part of Circuit Protection, ESD Protection Diodes / TVS Diodes, they fit easily into compact PCB layouts.

Durable Construction

The P6SMB6.8A ESD Protection Diodes / TVS Diodes by DOWO are built for long-term use.

Applications of P6SMB6.8A

The P6SMB6.8A ESD Protection Diodes / TVS Diodes by DOWO are widely used in:

• Consumer electronics

• Communication devices

• Industrial equipment

• Power supply circuits

• Automotive electronics

• Data line protection

These applications rely on high-quality Circuit Protection, ESD Protection Diodes / TVS Diodes for safety and performance.

Advantages of Using P6SMB6.8A

• Fast transient suppression

• Reliable ESD protection

• Compact and efficient design

• Long operational life

• Trusted performance in Circuit Protection, ESD Protection Diodes / TVS Diodes

The P6SMB6.8A ESD Protection Diodes / TVS Diodes are a reliable choice for protecting electronic circuits.

Also Available from Other Manufacturers

The P6SMB6.8A ESD Protection Diodes / TVS Diodes are also available from other manufacturers, including:

Youtai, SLKORMICRO, Liown, Jingdao, FTR, Bourne, LGE, Microdiode Electronics, Yageo, Yint, Littelfuse, Bourns

Download Datasheet for P6SMB6.8A

Download the complete P6SMB6.8A Datasheet from XON Electronics to access detailed specifications and protection characteristics.

Why Buy from XON Electronics?

XON Electronics offers genuine Circuit Protection, ESD Protection Diodes / TVS Diodes, including the P6SMB6.8A ESD Protection Diodes / TVS Diodes by DOWO.

Benefits include:

• Authentic components

• Competitive pricing

• Wide stock availability

• Fast delivery

• Trusted sourcing

Visit https://www.xonelec.com/ to explore more products.

Conclusion

The P6SMB6.8A ESD Protection Diodes / TVS Diodes by DOWO provide essential protection against voltage spikes and electrostatic discharge. As part of the Circuit Protection, ESD Protection Diodes / TVS Diodes category, they ensure system reliability and durability.

They are an ideal solution for safeguarding sensitive electronic components.

FAQs – P6SMB6.8A TVS Diodes

What is the P6SMB6.8A used for?

It is used for protecting circuits from voltage spikes and ESD events.

Which category does this product belong to?

It belongs to Circuit Protection, ESD Protection Diodes / TVS Diodes.

Who manufactures the P6SMB6.8A diode?

It is manufactured by DOWO.

What are the key benefits of this diode?

It offers fast response, high reliability, and effective protection.

Where can I buy P6SMB6.8A TVS diodes?

You can purchase them from XON Electronics.

Introduction

The Linear Voltage Regulators LM7912CT by HGSEMI is a high-performance negative voltage regulator designed to provide a stable -12V output for various electronic systems. As part of Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators, this component ensures reliable power regulation and protection.

Widely used in analog circuits and power supply designs, the LM7912CT is essential for maintaining stable voltage levels in applications within Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators.

Technical Specifications of LM7912CT

• General Specifications

  • Manufacturer: HGSEMI

  • Part Number: LM7912CT

  • Product Type: Linear Voltage Regulator

  • Output Voltage: -12V

  • Output Current: Up to 1A (typical)

  • Input Voltage: Wide input range

  • Package: TO-220

  • Mounting Type: Through Hole

  • Protection Features: Thermal and short-circuit protection

  • Category: Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators

These specifications make it ideal for stable and efficient power regulation applications.

Key Features of LM7912CT

Design and Performance Benefits

• Fixed -12V regulated output

• Built-in thermal overload protection

• Short-circuit protection for safety

• High reliability and stability

• Requires minimal external components

The LM7912CT Linear Voltage Regulators by HGSEMI ensures consistent performance in Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators applications.

Applications of LM7912CT

Common Use Cases

• Power supply circuits

• Audio amplifiers and analog systems

• Industrial electronics

• Embedded systems

• Dual voltage supply designs

These applications demonstrate the importance of Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators in power management.

Overview and Usage Guidelines

Installation and Best Practices

• Use heat sinks for higher current applications

• Ensure correct polarity for negative voltage output

• Add bypass capacitors for stability

• Operate within specified voltage limits

Proper usage of the LM7912CT Linear Voltage Regulators by HGSEMI improves reliability in Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators systems.

Use Case Example: Audio Amplifier Power Supply

Practical Implementation

• Application: Audio amplifier circuit

• Challenge: Stable negative voltage supply

• Solution: LM7912CT regulator

• Result: Noise-free and stable power output

This highlights the importance of linear regulators in analog systems.

Datasheet Information

For detailed electrical characteristics, thermal data, and application circuits, refer to the official HGSEMI datasheet available through authorized distributors.

Why Buy LM7912CT from XON?

Purchasing from www.xonelec.com, x-on electronics, or xon electronics ensures:

• 100% genuine HGSEMI components

• Competitive pricing and bulk availability

• Fast worldwide shipping

• Dedicated customer and technical support

Get reliable Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators from a trusted supplier.

FAQs – LM7912CT

What is the output voltage of LM7912CT?

It provides a fixed -12V output.

Is it suitable for analog circuits?

Yes, it is widely used in analog and audio systems.

Does it include protection features?

Yes, it includes thermal and short-circuit protection.

What package is it available in?

It comes in a TO-220 package.

Where can I buy LM7912CT online?

You can purchase it from www.xonelec.com with global delivery.

Conclusion

The LM7912CT Linear Voltage Regulators by HGSEMI is a dependable solution for negative voltage regulation. As part of Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators, it delivers stable performance, protection features, and efficiency for a wide range of applications.

396H-04 Connectors Headers & Wire Housings – Buy Online at XON

Introduction

The Headers & Wire Housings 396H-04 by Itek are essential components for establishing secure and efficient electrical connections in electronic systems. As part of Connectors, Headers & Wire Housings, these connectors are widely used in PCB designs and wiring applications.

Designed for reliability and ease of use, the 396H-04 Connectors, Headers & Wire Housings provide consistent performance in both industrial and consumer electronics.

Technical Specifications of 396H-04

Manufacturer: Itek
Part Number: 396H-04
Component Type: Headers & Wire Housings
Category: Connectors, Headers & Wire Housings
Number of Positions: 4
Mounting Type: PCB Mount
Application: Electrical connections and signal transmission

The 396H-04 Connectors, Headers & Wire Housings by Itek are designed for dependable use in Connectors, Headers & Wire Housings applications.

Key Features of 396H-04

Reliable Connectivity

The 396H-04 Connectors, Headers & Wire Housings by Itek ensure secure and stable electrical connections.

Compact Design

These connectors are suitable for space-constrained PCB layouts.

Easy Installation

The 396H-04 Connectors, Headers & Wire Housings allow quick and efficient assembly.

Durable Construction

As part of Connectors, Headers & Wire Housings, they are built for long-term use.

Efficient Performance

The 396H-04 Connectors, Headers & Wire Housings by Itek provide consistent signal and power transmission.

Applications of 396H-04

The 396H-04 Connectors, Headers & Wire Housings by Itek are used in:

• Consumer electronics

• Industrial automation

• Communication systems

• Computer hardware

• Embedded systems

• Power distribution units

These applications rely on high-quality Connectors, Headers & Wire Housings for stable and efficient connections.

Advantages of Using 396H-04

• Secure and reliable connections

• Compact and efficient design

• Easy integration into PCB systems

• Durable and long-lasting

• Proven performance in Connectors, Headers & Wire Housings

The 396H-04 Connectors, Headers & Wire Housings are a trusted choice for engineers and designers.

Download Datasheet for 396H-04

Download the complete 396H-04 Datasheet from XON Electronics to access detailed technical specifications and application insights.

Why Buy from XON Electronics?

XON Electronics offers a wide range of Connectors, Headers & Wire Housings, including the 396H-04 Connectors, Headers & Wire Housings by Itek.

Benefits include:

• Genuine components

• Competitive pricing

• Ready stock availability

• Fast delivery

• Trusted sourcing

Visit https://www.xonelec.com/ to explore more products.

Conclusion

The 396H-04 Headers & Wire Housings by Itek provide reliable and efficient connectivity solutions for a wide range of applications. As part of the Connectors, Headers & Wire Housings category, they ensure durability, performance, and ease of use.

They are an excellent choice for modern electronic systems requiring dependable connections.

FAQs – 396H-04 Connectors

What is the 396H-04 used for?

It is used for establishing electrical connections in PCB and wiring systems.

Which category does this product belong to?

It belongs to Connectors, Headers & Wire Housings.

Who manufactures the 396H-04 connectors?

They are manufactured by Itek.

What are the key benefits of this connector?

It offers reliability, compact design, and easy installation.

Where can I buy 396H-04 connectors?

You can purchase them from XON Electronics.

Introduction

The Linear Voltage Regulators LM7905CT by HGSEMI is a reliable negative voltage regulator designed to deliver a stable -5V output for a wide range of electronic applications. As part of Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators, this device ensures consistent voltage regulation and dependable performance.

Widely used in analog and digital circuits, the LM7905CT is an essential component for maintaining stable power supply conditions within Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators.

Technical Specifications of LM7905CT

• General Specifications

  • Manufacturer: HGSEMI

  • Part Number: LM7905CT

  • Product Type: Linear Voltage Regulator

  • Output Voltage: -5V

  • Output Current: Up to 1A (typical)

  • Input Voltage: Wide input range

  • Package: TO-220

  • Mounting Type: Through Hole

  • Protection Features: Thermal and short-circuit protection

  • Category: Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators

These specifications make it suitable for stable and reliable power management applications.

Key Features of LM7905CT

Design and Performance Benefits

• Fixed -5V regulated output

• Built-in thermal overload protection

• Short-circuit protection for enhanced safety

• High reliability and stability

• Simple integration with minimal external components

The LM7905CT Linear Voltage Regulators by HGSEMI delivers consistent power regulation in Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators applications.

Applications of LM7905CT

Common Use Cases

• Power supply circuits

• Audio and analog systems

• Industrial electronics

• Embedded systems

• Dual power supply designs

These applications highlight the importance of Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators in maintaining stable voltage levels.

Overview and Usage Guidelines

Installation and Best Practices

• Use proper heat sinking for high current applications

• Ensure correct polarity for negative voltage output

• Add input and output capacitors for stability

• Operate within specified voltage and current limits

Proper implementation of the LM7905CT Linear Voltage Regulators by HGSEMI ensures long-term reliability in Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators systems.

Use Case Example: Dual Power Supply Circuit

Practical Implementation

• Application: Analog amplifier circuit

• Challenge: Stable negative voltage supply

• Solution: LM7905CT voltage regulator

• Result: Reliable and noise-free power output

This demonstrates the importance of voltage regulators in power management systems.

Datasheet Information

For detailed electrical characteristics, thermal performance, and application circuits, refer to the official HGSEMI datasheet available through authorized distributors.

Why Buy LM7905CT from XON?

Purchasing from www.xonelec.com, x-on electronics, or xon electronics ensures:

• 100% genuine HGSEMI components

• Competitive pricing and bulk availability

• Fast worldwide shipping

• Dedicated customer and technical support

Get trusted Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators from a reliable supplier.

FAQs – LM7905CT

What is the output voltage of LM7905CT?

It provides a fixed -5V output.

Is it suitable for power supply circuits?

Yes, it is widely used in regulated power supplies.

Does it include protection features?

Yes, it includes thermal and short-circuit protection.

What package does it come in?

It comes in a TO-220 package.

Where can I buy LM7905CT online?

You can purchase it from www.xonelec.com with global delivery.

Conclusion

The LM7905CT Linear Voltage Regulators by HGSEMI is a dependable solution for negative voltage regulation. As part of Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators, it offers stability, protection, and efficient performance for various electronic applications.

Introduction

The Slide Switches EG1218 by E-Switch is a compact and reliable switching component designed for precise control in electronic circuits. As part of Electromechanical, Switches, Slide Switches, this device offers smooth operation, durability, and consistent performance across various applications.

Ideal for space-constrained designs, the EG1218 ensures dependable switching functionality in systems requiring efficient control within Electromechanical, Switches, Slide Switches.

Technical Specifications of EG1218

• General Specifications

  • Manufacturer: E-Switch

  • Part Number: EG1218

  • Product Type: Slide Switch

  • Switch Type: SPDT/DPDT (depending on configuration)

  • Mounting Type: Through Hole / PCB Mount

  • Actuation Type: Slide

  • Contact Rating: Suitable for low-power applications

  • Lifecycle: Long operational life

  • Category: Electromechanical, Switches, Slide Switches

These specifications make it suitable for compact and reliable switching solutions.

Key Features of EG1218 Slide Switches

Design and Performance Benefits

• Smooth sliding mechanism for precise control

• Compact design for space-saving applications

• Durable construction for extended lifespan

• Reliable electrical contact performance

• Easy integration into PCB designs

The EG1218 Slide Switches by E-Switch delivers consistent performance in Electromechanical, Switches, Slide Switches applications.

Applications of EG1218

Common Use Cases

• Consumer electronics devices

• Industrial control systems

• Communication equipment

• Portable electronics

• Power selection circuits

These applications highlight the importance of Electromechanical, Switches, Slide Switches in modern electronic systems.

Overview and Usage Guidelines

Installation and Best Practices

• Ensure proper PCB alignment during installation

• Avoid excessive force during switching

• Use within specified electrical ratings

• Maintain clean contact surfaces for reliability

Proper implementation of the EG1218 Slide Switches by E-Switch enhances durability in Electromechanical, Switches, Slide Switches systems.

Use Case Example: Mode Selection in Consumer Device

Practical Implementation

• Application: Mode selector in electronic gadget

• Challenge: Compact and reliable switching

• Solution: EG1218 slide switch

• Result: Smooth operation with reliable performance

This demonstrates how slide switches enhance usability in compact devices.

Datasheet Information

For detailed electrical ratings, mechanical dimensions, and lifecycle data, refer to the official E-Switch datasheet available through authorized distributors.

Why Buy EG1218 from XON?

Purchasing from www.xonelec.com, x-on electronics, or xon electronics ensures:

• 100% genuine E-Switch components

• Competitive pricing and bulk availability

• Fast worldwide shipping

• Dedicated customer and technical support

Get reliable Electromechanical, Switches, Slide Switches from a trusted supplier.

FAQs – EG1218

What type of switch is EG1218?

It is a slide switch used for manual control.

Is it suitable for PCB mounting?

Yes, it supports PCB mounting.

What applications can it be used in?

It is used in consumer electronics, industrial systems, and more.

Does it support long-term use?

Yes, it is designed for durability and long lifecycle.

Where can I buy EG1218 online?

You can purchase it from www.xonelec.com with global delivery.

Conclusion

The EG1218 Slide Switches by E-Switch is a reliable and compact solution for switching applications. As part of Electromechanical, Switches, Slide Switches, it provides smooth operation, durability, and consistent performance in a wide range of electronic devices.

Introduction

The Crimpers/Crimping Tools 63811-1000 by Molex is a professional-grade tool designed for precise and reliable crimping of terminals and connectors. As part of Tools & Supplies, Tools, Crimpers / Crimping Tools, this tool ensures consistent performance, durability, and high-quality electrical connections.

Engineered for industrial and professional use, the 63811-1000 is widely trusted for achieving secure and accurate crimps in applications requiring efficiency within Tools & Supplies, Tools, Crimpers / Crimping Tools.

Technical Specifications of 63811-1000

• General Specifications

  • Manufacturer: Molex

  • Part Number: 63811-1000

  • Product Type: Crimping Tool

  • Tool Type: Hand Crimper

  • Application: Terminal and connector crimping

  • Compatibility: Specific Molex terminals

  • Build Material: High-strength metal construction

  • Usage: Industrial and professional applications

  • Category: Tools & Supplies, Tools, Crimpers / Crimping Tools

These specifications make it ideal for achieving reliable and repeatable crimp connections.

Key Features of 63811-1000

Design and Performance Benefits

• Precision crimping for consistent results

• Ergonomic design for user comfort

• Durable construction for long-term use

• Designed for specific terminal compatibility

• Ensures secure and reliable electrical connections

The 63811-1000 Crimpers/Crimping Tools by Molex provides excellent performance in Tools & Supplies, Tools, Crimpers / Crimping Tools applications.

Applications of 63811-1000

Common Use Cases

• Wire harness assembly

• Industrial manufacturing

• Automotive wiring systems

• Electrical panel assembly

• Maintenance and repair operations

These applications highlight the importance of Tools & Supplies, Tools, Crimpers / Crimping Tools in ensuring reliable electrical connections.

Overview and Usage Guidelines

Installation and Best Practices

• Use the tool with compatible terminals only

• Apply consistent pressure for proper crimping

• Regularly inspect tool condition

• Follow manufacturer guidelines for optimal performance

Proper use of the 63811-1000 Crimpers/Crimping Tools by Molex enhances reliability in Tools & Supplies, Tools, Crimpers / Crimping Tools applications.

Use Case Example: Wire Harness Manufacturing

Practical Implementation

• Application: Automotive wire harness assembly

• Challenge: Achieving consistent and secure crimps

• Solution: 63811-1000 crimping tool

• Result: Improved connection reliability and production efficiency

This demonstrates the importance of precision tools in manufacturing processes.

Datasheet Information

For detailed tool compatibility, crimp profiles, and usage instructions, refer to the official Molex datasheet available through authorized distributors.

Why Buy 63811-1000 from XON?

Purchasing from www.xonelec.com, x-on electronics, or xon electronics ensures:

• 100% genuine Molex tools

• Competitive pricing and bulk availability

• Fast global shipping

• Dedicated customer and technical support

Get trusted Tools & Supplies, Tools, Crimpers / Crimping Tools from a reliable supplier.

FAQs – 63811-1000

What is 63811-1000 used for?

It is used for crimping terminals and connectors.

Is it suitable for industrial use?

Yes, it is designed for professional and industrial applications.

Does it support specific terminals?

Yes, it is compatible with specific Molex terminals.

Is it a manual or automatic tool?

It is a manual hand crimping tool.

Where can I buy 63811-1000 online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The 63811-1000 Crimpers/Crimping Tools by Molex is a reliable and efficient solution for professional crimping needs. As part of Tools & Supplies, Tools, Crimpers / Crimping Tools, it ensures precision, durability, and consistent performance in various applications.