271-536-RC Metal Film Resistors – Through Hole by Xicon

The Metal Film Resistors – Through Hole 271-536-RC by Xicon are high-precision resistors designed for stable performance in electronic and industrial circuits. Known for tight tolerance and low noise, these resistors are widely used in signal conditioning, control systems, and general-purpose electronics.

As part of Passive Components, Resistors, Film Resistors, Metal Film Resistors – Through Hole, this model shares similar performance characteristics with the 271-8.66K-RC, making it an excellent choice for engineers looking for accuracy and long-term reliability. Trusted distributors like www.xonelec.com, X-On Electronics, and XON Electronics provide genuine Xicon components for global buyers.

Technical Specifications of 271-536-RC

General Specifications

• Manufacturer: Xicon

• Part Number: 271-536-RC

• Resistor Type: Metal Film Resistor

• Mounting Type: Through Hole

• Resistance Category: Fixed Resistor

Performance Characteristics

• High stability and low temperature coefficient

• Low noise for signal-sensitive circuits

• Reliable long-term performance

Belonging to Passive Components, Resistors, Film Resistors, Metal Film Resistors – Through Hole, this resistor is suitable for both commercial and industrial applications.

Key Features of 271-536-RC Metal Film Resistor

High Precision Performance

Metal film construction ensures accurate resistance values and minimal drift.

Low Noise Characteristics

Ideal for audio, measurement, and analog signal paths.

Excellent Thermal Stability

Consistent performance across temperature variations.

Through-Hole Reliability

Easy soldering and strong mechanical connection on PCBs.

Like the 271-8.66K-RC, this component is a dependable option within Passive Components, Resistors, Film Resistors, Metal Film Resistors – Through Hole.

Applications of 271-536-RC

Industrial Electronics

• Control circuits

• Power monitoring systems

Consumer & Commercial Devices

• Audio amplifiers

• Home appliances

• Datasheet

Measurement & Signal Processing

• Instrumentation circuits

• Low-noise analog designs

These applications highlight why Metal Film Resistors – Through Hole are preferred over carbon-based alternatives in precision designs.

Comparison Reference: 271-536-RC vs 271-8.66K-RC

Design Similarities

• Metal film construction

• Through-hole mounting

• Low noise and high accuracy

Category Alignment

Both resistors fall under Passive Components, Resistors, Film Resistors, Metal Film Resistors – Through Hole, making them interchangeable in many design scenarios based on resistance value needs.

Why Choose Xicon Metal Film Resistors?

Proven Manufacturer

Xicon is known globally for consistent quality passive components.

Design Engineer Friendly

Reliable specs simplify component selection and circuit validation.

Wide Availability

Easily sourced through global electronic component distributors.

Sourcing from www.xonelec.com ensures access to genuine Xicon resistors with worldwide shipping support.

FAQs – 271-536-RC Metal Film Resistors

What type of resistor is 271-536-RC?

It is a metal film resistor with through-hole mounting.

Is it suitable for precision circuits?

Yes, it offers low noise and stable resistance values.

Can it replace 271-8.66K-RC?

It can be used in similar designs depending on resistance value requirements.

Which category does it belong to?

It is part of Passive Components, Resistors, Film Resistors, Metal Film Resistors – Through Hole.

Conclusion

The 271-536-RC Metal Film Resistors – Through Hole by Xicon deliver precision, stability, and reliability for modern electronic designs. Sharing design strengths with the 271-8.66K-RC, this resistor is an excellent choice within Passive Components, Resistors, Film Resistors, Metal Film Resistors – Through Hole for industrial, commercial, and signal-processing applications.

2EHDVC-03P Pluggable Terminal Blocks by Dinkle – Reliable PCB Connectivity

The Pluggable Terminal Blocks 2EHDVC-03P by Dinkle are high-quality PCB interconnection solutions designed for secure wiring, fast installation, and long-term durability. These terminal blocks are widely used in industrial automation, power distribution, and electronic control systems.

Available from www.xonelec.com — also known as X-On Electronics and XON Electronics — this product delivers dependable electrical connectivity for modern electronic designs. Engineers prefer these components when working with bold: Connectors, Terminal Blocks, Pluggable Terminal Blocks that require stable performance and compact form factors.

Technical Specifications of 2EHDVC-03P

Manufacturer: Dinkle
Part Number: 2EHDVC-03P
Product Type: Pluggable Terminal Block
Number of Positions: 3 Pole
Mounting Type: PCB Mount
Connection Type: Plug-in Screw Terminal
Rated Voltage: Industry standard PCB voltage range
Rated Current: Suitable for control and signal circuits
Housing Material: Flame-retardant thermoplastic
Contact Material: Copper alloy

These specifications make the part ideal for professional bold: Connectors, Terminal Blocks, Pluggable Terminal Blocks applications in compact PCB layouts.

Key Features of 2EHDVC-03P Pluggable Terminal Blocks

• Secure screw connection ensures vibration resistance

• Easy plug-in and removal for maintenance

• Compact footprint saves PCB space

• High mechanical strength and durability

• Stable electrical performance over long operating cycles

These features make Dinkle a trusted brand for bold: Connectors, Terminal Blocks, Pluggable Terminal Blocks used in demanding industrial environments.

Applications of 2EHDVC-03P

The 2EHDVC-03P is commonly used in:

• Industrial automation controllers

• Power supply modules

• PLC systems and I/O boards

• LED driver boards

• Instrumentation and control panels

• Communication equipment

Wherever reliable bold: Connectors, Terminal Blocks, Pluggable Terminal Blocks are required, this component provides stable and safe connectivity.

Wiring and Connection Overview

PCB Installation and Plug Connection

• The header is soldered directly onto the PCB.

• The plug-in terminal block connects securely to the header.

• Wires are tightened using screw clamps for firm contact.

• Easy disconnection allows quick servicing or replacement.

This design minimizes downtime and improves maintenance efficiency in electronic systems.

Use Case Scenario

Control Panel Signal Distribution

Scenario: A panel manufacturer needed compact terminal blocks for signal distribution in control cabinets.
Challenge: Limited PCB space and frequent maintenance requirements.
Solution: The 2EHDVC-03P allowed quick plug-in wiring and secure screw termination.
Result: Faster installation, reduced maintenance time, and reliable signal stability.

Why Buy from XON Electronics?

• Genuine Dinkle components

• Large inventory of electronic parts

• Fast international shipping

• Competitive pricing for bulk orders

• Professional technical support

Order securely from www.xonelec.com — trusted globally as X-On Electronics and XON Electronics.

Conclusion

The 2EHDVC-03P Pluggable Terminal Blocks by Dinkle deliver reliable electrical connections, easy installation, and strong mechanical stability. For designers seeking dependable PCB interconnect solutions, this product is an excellent choice across automation, control, and power applications.

FAQs – 2EHDVC-03P Pluggable Terminal Blocks

Q1. How many positions does the 2EHDVC-03P support?
It supports 3 connection positions.

Q2. Is this suitable for PCB mounting?
Yes, it is specifically designed for PCB mounting.

Q3. Can it handle industrial environments?
Yes, it is built using flame-retardant housing and durable metal contacts.

Q4. Is it easy to replace during maintenance?
Yes, the pluggable design allows quick removal and reinstallation.

Q5. Where can I purchase this part?
It is available through authorized electronic distributors.

APBD3224SURKCGKC-F01 Standard LEDs - SMD by Kingbright – High Brightness Indicator Solution

The Standard LEDs - SMD APBD3224SURKCGKC-F01 by Kingbright deliver high brightness, excellent color consistency, and long operational life for compact electronic designs. Built for surface-mount applications, this LED is ideal for indicator lighting, backlighting, and display panels across consumer and industrial electronics.

As a proven solution in Optoelectronics, LED Lighting, LED Emitters, and Standard LEDs - SMD, the APBD3224SURKCGKC-F01 ensures efficient light output, low power consumption, and reliable thermal performance. Designers trust this LED for consistent visual performance and long-term durability.

In this blog, we’ll explore specifications, features, applications, mounting guidance, datasheet access, and FAQs, along with sourcing options from www.xonelec.com supported by x-on electronics and xon electronics.

Technical Specifications of APBD3224SURKCGKC-F01

• Manufacturer: Kingbright

• Part Number: APBD3224SURKCGKC-F01

• LED Type: Standard SMD LED

• Emitting Color: Red / Green (bi-color variant)

• Lens Type: Diffused

• Mounting Type: Surface Mount (SMD)

• Forward Voltage: Low voltage operation

• Viewing Angle: Wide angle visibility

• Operating Temperature: Industrial-grade range

• Category: Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD

The APBD3224SURKCGKC-F01 is optimized for reliable illumination and consistent brightness in compact layouts.

Key Features of APBD3224SURKCGKC-F01 LED

• High Brightness Output – Clear visibility in various lighting conditions

• Low Power Consumption – Energy-efficient operation

• Compact SMD Package – Space-saving PCB integration

• Wide Viewing Angle – Uniform light distribution

• Broad Industry Use – Trusted in Optoelectronics, LED Lighting, LED Emitters, and Standard LEDs - SMD

These features make the APBD3224SURKCGKC-F01 suitable for both functional and decorative lighting applications.

Applications of APBD3224SURKCGKC-F01

The APBD3224SURKCGKC-F01 is commonly used in:

• Status Indicators and Panel Lights

• Consumer Electronics Displays

• Industrial Control Panels

• Automotive Dashboard Indicators

• Backlighting for Small Displays

• Designs within Optoelectronics

• Lighting systems based on LED Lighting

• Signal devices using LED Emitters and Standard LEDs - SMD

Its stable optical performance supports long-term system reliability.

Mounting and Soldering Overview

Typical SMD mounting process:

• Place LED using pick-and-place machine

• Reflow solder according to recommended profile

• Ensure correct polarity alignment

• Inspect solder joints for reliability

• Test brightness and color consistency

Proper assembly ensures optimal performance in Optoelectronics and LED Lighting applications using the APBD3224SURKCGKC-F01.

Use Case Scenario: Control Panel Indicator Upgrade

Scenario:
A manufacturer upgraded control panel indicators for better visibility and longevity.

Problem:
Older LEDs had uneven brightness and frequent failures.

Solution:
The APBD3224SURKCGKC-F01 delivered consistent brightness and long lifespan.

Result:
Improved visibility and reduced maintenance in LED Emitters and Standard LEDs - SMD based indicator systems.

Download Datasheet for APBD3224SURKCGKC-F01

Looking for optical characteristics, electrical ratings, and footprint dimensions?

Download APBD3224SURKCGKC-F01 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics provides trusted sourcing worldwide:

• Genuine Kingbright Products
• Worldwide Shipping
• Competitive Pricing
• Technical Support
• Secure Checkout

Order conveniently from www.xonelec.com through x-on electronics and xon electronics.

Conclusion

The APBD3224SURKCGKC-F01 Standard LEDs - SMD by Kingbright offer high brightness, energy efficiency, and reliable performance. Designed for professional Optoelectronics, LED Lighting, LED Emitters, and Standard LEDs - SMD applications, this LED ensures consistent illumination and long operational life.

FAQs – APBD3224SURKCGKC-F01 Standard LEDs - SMD

What type of LED is APBD3224SURKCGKC-F01?

It is a surface-mount standard LED designed for indicator and display use.

Is this LED suitable for industrial environments?

Yes, it supports stable operation in industrial temperature ranges.

Does it support automated assembly?

Yes, it is compatible with reflow soldering and automation.

What applications commonly use this LED?

Status indicators, control panels, consumer electronics, and dashboards.

Where can I purchase this LED online?

Available from trusted electronic component distributors worldwide.

BC33725TA Bipolar Transistors - BJT by ON Semiconductor – High Performance Switching Solution

The Bipolar Transistor BC33725TA by ON Semiconductor is a versatile and reliable NPN transistor designed for switching and amplification in a wide range of electronic circuits. Known for its stable electrical characteristics and compact package, this transistor supports efficient current control and fast response times in embedded and industrial designs.

As a proven solution across Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT, the BC33725TA delivers consistent performance, low saturation voltage, and excellent thermal reliability. Engineers select this device for dependable signal switching and amplification tasks.

In this blog, we’ll explore specifications, features, applications, wiring guidance, datasheet access, and FAQs, along with sourcing options from www.xonelec.com supported by x-on electronics and xon electronics.

Technical Specifications of BC33725TA

• Manufacturer: ON Semiconductor

• Part Number: BC33725TA

• Transistor Type: NPN Bipolar Junction Transistor

• Collector-Emitter Voltage: 45V

• Collector Current: Up to 800mA

• Power Dissipation: Approx. 625mW

• Gain (hFE): High gain group

• Package: TO-92

• Mounting: Through-Hole

• Category: Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT

The BC33725TA is engineered for efficient current handling and reliable switching performance.

Key Features of BC33725TA Bipolar Transistor

• High Current Capability – Supports up to 800mA collector current

• Low Saturation Voltage – Improves power efficiency

• Fast Switching Speed – Suitable for digital control circuits

• Thermal Stability – Reliable operation under load

• Wide Usage – Trusted in Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT

These features make the BC33725TA ideal for general-purpose amplification and switching designs.

Applications of BC33725TA

The BC33725TA transistor is widely used in:

• Relay and Motor Driver Circuits

• Signal Amplification Stages

• Power Switching Modules

• Embedded Control Systems

• Consumer Electronics

• Designs based on Semiconductors

• Driver circuits using Discrete Semiconductors

• Switching systems built with Transistors and Bipolar Transistors - BJT

Its reliability supports consistent circuit performance in multiple environments.

Wiring and Connection Overview

Typical transistor connection:

• Base (B): Control signal input

• Collector (C): Load connection

• Emitter (E): Ground reference

Use appropriate base resistor to limit current and ensure proper biasing for safe operation.

Use Case Scenario: Relay Driver Circuit

Scenario:
A control system required a compact transistor to drive a relay reliably.

Problem:
Existing transistors overheated under continuous load.

Solution:
The BC33725TA provided stable current handling and thermal performance.

Result:
Improved system reliability and reduced component failure in Semiconductors and Discrete Semiconductors circuits utilizing Transistors and Bipolar Transistors - BJT.

Download Datasheet for BC33725TA

Looking for electrical parameters, pin configuration, and thermal ratings?

Download BC33725TA Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics ensures reliable sourcing worldwide:

• Genuine ON Semiconductor Products
• Worldwide Shipping
• Bulk Pricing Options
• Technical Support
• Secure Checkout

Order easily from www.xonelec.com through x-on electronics and xon electronics.

Conclusion

The BC33725TA Bipolar Transistors - BJT by ON Semiconductor offer high current capability, fast switching, and dependable thermal performance. Designed for professional Semiconductors, Discrete Semiconductors, Transistors, and Bipolar Transistors - BJT applications, it remains a reliable choice for switching and amplification circuits.

FAQs – BC33725TA Bipolar Transistor

What type of transistor is BC33725TA?

It is an NPN Bipolar Junction Transistor.

What is the maximum collector current?

Up to 800mA.

Is it suitable for switching applications?

Yes, it supports fast switching and stable performance.

Can it be used in amplification circuits?

Yes, it provides consistent gain for signal amplification.

Where can I buy BC33725TA online?

Available from trusted electronic component distributors worldwide.

1N4007A Diodes - General Purpose, Power, Switching by DC Components – Reliable Rectification Solution

The Diodes - General Purpose, Power, Switching 1N4007A by DC Components is a widely trusted solution for rectification, polarity protection, and general-purpose switching applications. Designed for high voltage handling and stable electrical performance, this diode is commonly used in power supplies, adapters, chargers, and industrial electronics.

As a reliable product across Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, and Diodes - General Purpose, Power, Switching, the 1N4007A delivers consistent performance, excellent thermal stability, and long service life. Engineers select this diode for dependable operation in demanding electrical circuits.

In this blog, we’ll explore technical specifications, features, applications, wiring guidance, datasheet access, and FAQs, along with sourcing options from www.xonelec.com supported by x-on electronics and xon electronics.

Technical Specifications of 1N4007A

• Manufacturer: DC Components

• Part Number: 1N4007A

• Diode Type: Standard Recovery Rectifier

• Peak Reverse Voltage: 1000V

• Average Forward Current: 1A

• Forward Voltage Drop: ~1.1V

• Package: DO-41

• Mounting: Through-Hole

• Operating Temperature: -55°C to +150°C

• Category: Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Diodes - General Purpose, Power, Switching

The 1N4007A is designed to handle high voltage with excellent electrical reliability.

Key Features of 1N4007A Diodes

• High Voltage Capability – Supports up to 1000V reverse voltage

• Stable Current Handling – 1A continuous forward current

• Reliable Thermal Performance – Suitable for high-temperature operation

• Cost-Effective Design – Ideal for mass production

• Wide Application Coverage – Trusted across Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, and Diodes - General Purpose, Power, Switching

These features make the 1N4007A a popular diode for general electronics and industrial systems.

Applications of 1N4007A

The 1N4007A diode is widely used in:

• AC to DC Power Supplies

• Battery Chargers and Adapters

• Reverse Polarity Protection Circuits

• Switching Circuits

• LED Driver Modules

• Designs based on Semiconductors

• Power modules using Discrete Semiconductors

• Rectifier circuits in Diodes & Rectifiers and Diodes - General Purpose, Power, Switching

Its electrical stability ensures reliable operation across multiple environments.

Wiring and Connection Overview

Typical installation guidelines:

• Identify cathode band for polarity orientation

• Connect anode to AC or signal source

• Connect cathode toward load or filtering stage

• Ensure adequate spacing for heat dissipation

• Verify voltage and current ratings

Proper polarity ensures safe and efficient rectification performance.

Use Case Scenario: Power Supply Rectification Circuit

Scenario:
A designer needed a dependable rectifier diode for a compact power supply.

Problem:
Low-quality diodes failed under high voltage stress.

Solution:
The 1N4007A provided reliable high-voltage handling.

Result:
Improved durability and consistent performance in Semiconductors and Discrete Semiconductors circuits utilizing Diodes & Rectifiers and Diodes - General Purpose, Power, Switching.

Download Datasheet for 1N4007A

Looking for electrical ratings, thermal characteristics, and mechanical dimensions?

Download 1N4007A Datasheet from Xon Electronics 

Why Buy from Xon Electronics?

Xon Electronics provides trusted sourcing worldwide:

• Genuine DC Components Products
• Global Shipping
• Bulk Pricing Support
• Technical Assistance
• Secure Checkout

Order easily from www.xonelec.com via x-on electronics and xon electronics.

Conclusion

The 1N4007A Diodes - General Purpose, Power, Switching by DC Components deliver dependable rectification, high voltage tolerance, and long-term reliability. Designed for professional Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, and Diodes - General Purpose, Power, Switching applications, it remains a trusted component across industries.

FAQs – 1N4007A Diodes

What is the maximum voltage rating of 1N4007A?

It supports up to 1000V peak reverse voltage.

What current can 1N4007A handle?

It supports up to 1A average forward current.

Is 1N4007A suitable for switching applications?

Yes, it is commonly used in low-frequency switching circuits.

Can it be used for polarity protection?

Yes, it provides effective reverse polarity protection.

Where can I purchase 1N4007A online?

Available from trusted electronic component distributors worldwide.

MAX-MB-GPS-1 Signal Conditioning by F&F – Precision Signal Optimization Solution

The Signal Conditioning module MAX-MB-GPS-1 by F&F is engineered to improve signal quality, stability, and accuracy in sensitive electronic systems. It enhances weak or noisy signals, ensuring consistent performance across monitoring, measurement, and control applications.

As a dependable solution in Passive Components and Signal Conditioning, the MAX-MB-GPS-1 supports clean signal transmission, reduced interference, and reliable data integrity. Engineers rely on this device for high-precision environments where stable signal processing is critical.

In this blog, we’ll explore specifications, features, applications, wiring guidance, datasheet access, and FAQs, along with sourcing options from www.xonelec.com supported by x-on electronics and xon electronics.

Technical Specifications of MAX-MB-GPS-1

• Manufacturer: F&F

• Part Number: MAX-MB-GPS-1

• Product Type: Signal Conditioning Module

• Input Signal Type: Low-level analog / sensor signals

• Output Signal: Conditioned and stabilized signal

• Power Supply: Low power operation

• Mounting Type: Board mount / Module integration

• Operating Environment: Industrial-grade reliability

• Category: Passive Components, Signal Conditioning

The MAX-MB-GPS-1 delivers accurate signal conditioning performance with minimal noise distortion.

Key Features of MAX-MB-GPS-1 Signal Conditioning Module

• Noise Reduction – Improves signal clarity

• Signal Stabilization – Maintains consistent output

• Low Power Consumption – Ideal for embedded systems

• Compact Design – Easy integration into tight layouts

• Wide Compatibility – Trusted in Passive Components and Signal Conditioning applications

These features make the MAX-MB-GPS-1 an excellent choice for precision signal processing projects.

Applications of MAX-MB-GPS-1

The MAX-MB-GPS-1 is widely used in:

• GPS Signal Processing Systems

• Industrial Sensors and Instrumentation

• Data Acquisition Modules

• Embedded Control Systems

• Measurement and Monitoring Equipment

• Systems utilizing Passive Components

• Precision electronics requiring Signal Conditioning

Its performance reliability supports mission-critical signal accuracy.

Wiring and Connection Overview

Typical integration steps:

• Connect input signal source to module input terminals

• Provide regulated power supply as specified

• Connect conditioned output to processing unit

• Ensure proper grounding and shielding

• Verify output stability during testing

Correct installation ensures optimal performance in Passive Components and Signal Conditioning systems using the MAX-MB-GPS-1.

Use Case Scenario: GPS Tracking Module Enhancement

Scenario:
A developer needed improved signal accuracy for a GPS tracking device.

Problem:
Raw GPS signals were unstable and noisy.

Solution:
The MAX-MB-GPS-1 cleaned and stabilized incoming signals.

Result:
Improved tracking accuracy and reliable performance using professional Passive Components and Signal Conditioning modules.

Download Datasheet for MAX-MB-GPS-1

Looking for electrical characteristics, pin configuration, and application guidelines?

 Download MAX-MB-GPS-1 Datasheet from Xon Electronics 

Why Buy from Xon Electronics?

Xon Electronics offers global sourcing advantages:

• Genuine F&F Products
• Worldwide Shipping
• Competitive Pricing
• Technical Support
• Secure Checkout

Order conveniently from www.xonelec.com via x-on electronics and xon electronics.

Conclusion

The MAX-MB-GPS-1 Signal Conditioning module by F&F delivers reliable noise reduction, signal stability, and precision performance. Designed for professional Passive Components and Signal Conditioning applications, it ensures consistent signal integrity in demanding electronic environments.

FAQs – MAX-MB-GPS-1 Signal Conditioning

What is the main purpose of MAX-MB-GPS-1?

It improves signal quality by reducing noise and stabilizing output.

Is MAX-MB-GPS-1 suitable for GPS applications?

Yes, it enhances weak or noisy GPS signals.

Does it support low power operation?

Yes, it is optimized for energy-efficient designs.

Can it be used in industrial environments?

Yes, it is built for industrial reliability.

Where can I buy MAX-MB-GPS-1 online?

Available from trusted electronic component distributors worldwide.

4NC0F0E10 Contactors - Electromechanical by Fuji – Reliable Industrial Switching Solution

The Contactors - Electromechanical 4NC0F0E10 by Fuji are designed to deliver dependable switching performance for demanding industrial power control applications. Built with rugged materials and precise engineering, these contactors ensure long service life, safe operation, and consistent electrical performance in automation systems.

As a trusted solution across Electromechanical, Industrial Automation, Contactors, and Contactors - Electromechanical, the 4NC0F0E10 supports high-load switching with excellent thermal stability and mechanical endurance. Engineers rely on this product to maintain safe and efficient motor control, lighting control, and power distribution systems.

In this blog, we’ll explore specifications, features, applications, wiring guidance, datasheet access, and FAQs, along with sourcing options from www.xonelec.com supported by x-on electronics and xon electronics.

Technical Specifications of 4NC0F0E10

• Manufacturer: Fuji Electric

• Part Number: 4NC0F0E10

• Product Type: Contactors - Electromechanical

• Rated Voltage: Industrial-rated (model dependent)

• Rated Current: Suitable for motor and load switching

• Contact Configuration: Normally Open / Auxiliary options

• Coil Type: AC/DC Coil (application dependent)

• Mounting: DIN Rail / Panel Mount

• Mechanical Life: High cycle endurance

• Category: Electromechanical, Industrial Automation, Contactors, Contactors - Electromechanical

The 4NC0F0E10 meets industrial safety and reliability standards for continuous-duty applications.

Key Features of 4NC0F0E10 Contactors

• High Switching Capacity – Supports heavy electrical loads

• Rugged Construction – Long mechanical and electrical life

• Stable Coil Operation – Reliable actuation under voltage variation

• Compact Design – Space-saving panel installation

• Wide Application Use – Proven in Electromechanical, Industrial Automation, Contactors, and Contactors - Electromechanical

These features make the 4NC0F0E10 a dependable solution for industrial power control systems.

Applications of 4NC0F0E10

The 4NC0F0E10 is commonly used in:

• Motor Control Centers

• Industrial Automation Panels

• Conveyor and Pump Systems

• HVAC Control Systems

• Power Distribution Boards

• Control systems within Electromechanical infrastructure

• Automated machinery in Industrial Automation

• Switching circuits using Contactors and Contactors - Electromechanical

Its reliability ensures safe switching even in harsh operating environments.

Wiring and Connection Overview

Typical wiring configuration:

• Connect control voltage to coil terminals

• Connect power lines to main contact terminals

• Secure auxiliary contacts for signaling

• Ensure proper grounding and insulation

• Test operation before commissioning

Proper installation maximizes performance and operational safety.

Use Case Scenario: Motor Control Panel Upgrade

Scenario:
A manufacturing plant upgraded its motor control system for improved reliability.

Problem:
Older contactors failed frequently under heavy loads.

Solution:
The 4NC0F0E10 provided higher endurance and stable switching.

Result:
Reduced downtime, improved safety, and enhanced performance in Electromechanical and Industrial Automation environments using Contactors and Contactors - Electromechanical.

Download Datasheet for 4NC0F0E10

Looking for coil ratings, contact configuration, and dimensional drawings?

Download 4NC0F0E10 Datasheet from Xon Electronics 

Why Buy from Xon Electronics?

Xon Electronics provides global sourcing advantages:

• Genuine Fuji Products
• Worldwide Shipping
• Competitive Industrial Pricing
• Technical Support
• Secure Ordering

Order confidently from www.xonelec.com through x-on electronics and xon electronics.

Conclusion

The 4NC0F0E10 Contactors - Electromechanical by Fuji deliver superior switching reliability, rugged construction, and long operational life. Designed for professional Electromechanical, Industrial Automation, Contactors, and Contactors - Electromechanical applications, this product ensures safe and efficient industrial power control.

FAQs – 4NC0F0E10 Contactors - Electromechanical

What is the primary function of 4NC0F0E10?

It switches and controls electrical power in industrial circuits.

Is this contactor suitable for motor control?

Yes, it is designed for motor and heavy-load switching.

What mounting options are supported?

DIN rail and panel mounting depending on configuration.

Does it support continuous-duty operation?

Yes, it is engineered for long operational life.

Where can I purchase this contactor online?

Available from trusted industrial electronics distributors worldwide.

Introduction

The Metal Film Resistors - Through Hole 271-536-RC by Xicon are precision resistors designed to deliver stable resistance, low noise, and long-term reliability in electronic circuits. These components are ideal for applications where accuracy and consistency are critical. As part of Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole, the 271-536-RC series is widely used across industrial, consumer, and instrumentation electronics.

Technical Specifications of 271-536-RC Metal Film Resistors

General Specifications

• Manufacturer: Xicon

• Part Number: 271-536-RC

• Resistance Value: 536 O

• Resistance Tolerance: ±5%

• Power Rating: 1/4 W (Typical)

• Resistor Technology: Metal Film

• Mounting Type: Through Hole

• Operating Temperature Range: Industrial standard

• Category: Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole

These specifications ensure dependable performance under various operating conditions.

Key Features of 271-536-RC Metal Film Resistors

Performance Highlights

• High resistance stability over time

• Low electrical noise for signal integrity

• Excellent thermal characteristics

• Flame-retardant protective coating

• Long operational life

The 271-536-RC Metal Film Resistors - Through Hole by Xicon are a reliable choice within Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole for precision designs.

Applications of 271-536-RC Metal Film Resistors

Typical Applications

• Signal conditioning circuits

• Audio and amplifier systems

• Power regulation and control circuits

• Industrial automation equipment

• Consumer electronics

These applications demonstrate the versatility of Metal Film Resistors - Through Hole in stable and accurate circuit designs.

Wiring and Connection Overview

Installation Guidelines

• Insert resistor leads into PCB through-holes

• Maintain proper lead spacing to prevent stress

• Use standard hand or wave soldering methods

• Avoid prolonged exposure to excessive heat

Correct installation enhances the reliability of Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole.

Use Case Example: Stable Control Circuit

Practical Scenario

• Application: Control and feedback circuitry

• Design Requirement: Accurate resistance with minimal drift

• Component Used: 271-536-RC Metal Film Resistors - Through Hole by Xicon

• Outcome: Improved circuit accuracy and long-term stability

This highlights the importance of Metal Film Resistors - Through Hole in professional electronic systems.

Datasheet Information

For detailed electrical characteristics, mechanical dimensions, and environmental ratings, consult the official Xicon datasheet available through authorized distributors.

Why Buy 271-536-RC Metal Film Resistors from XON?

When purchasing 271-536-RC Metal Film Resistors - Through Hole by Xicon from XON, you gain:

• Genuine Xicon components

• Competitive pricing for bulk and single-unit orders

• Fast worldwide shipping

• Dedicated customer and technical support

Order securely from www.xonelec.com, x-on electronics, or xon electronics for trusted Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole.

FAQs – 271-536-RC Metal Film Resistors

What type of resistor is the 271-536-RC?

It is a metal film resistor designed for through-hole PCB mounting.

Is it suitable for precision circuits?

Yes, it offers stable resistance and low noise performance.

Can it be used in industrial environments?

Yes, it is suitable for standard industrial operating conditions.

Does it fit standard PCB layouts?

Yes, it is compatible with standard through-hole designs.

Where can I buy this resistor online?

You can purchase it from www.xonelec.com with global delivery options.

Conclusion

The 271-536-RC Metal Film Resistors - Through Hole by Xicon provide excellent stability, accuracy, and durability. As a dependable option within Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole, they are ideal for engineers seeking reliable resistor performance in professional electronic applications.

Introduction

The Metal Film Resistors - Through Hole 271-5.76K-RC by Xicon are precision resistors engineered for stable electrical performance, low noise, and long operational life. Designed to meet the demands of modern electronics, these resistors are ideal for applications requiring accurate resistance control. As part of Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole, this component is widely used in industrial, consumer, and instrumentation circuits.

Technical Specifications of 271-5.76K-RC Metal Film Resistors

General Specifications

• Manufacturer: Xicon

• Part Number: 271-5.76K-RC

• Resistance Value: 5.76 kO

• Resistance Tolerance: ±5%

• Power Rating: 1/4 W (Typical)

• Technology: Metal Film

• Mounting Type: Through Hole

• Operating Temperature Range: Industrial standard

• Category: Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole

These specifications ensure reliable and consistent performance in demanding electronic environments.

Key Features of 271-5.76K-RC Metal Film Resistors

Performance Advantages

• High resistance accuracy and stability

• Low noise for signal-sensitive circuits

• Excellent thermal performance

• Flame-retardant coating for added safety

• Long-term reliability

The 271-5.76K-RC Metal Film Resistors - Through Hole by Xicon are trusted components within Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole categories.

Applications of 271-5.76K-RC Metal Film Resistors

Typical Applications

• Signal conditioning and processing circuits

• Audio and amplifier designs

• Power management systems

• Industrial automation equipment

• Consumer electronic devices

These use cases demonstrate the versatility of Metal Film Resistors - Through Hole in precision electronic designs.

Wiring and Connection Overview

Installation Guidelines

• Insert the resistor leads into PCB through-holes

• Maintain correct lead spacing to avoid mechanical stress

• Use standard hand or wave soldering techniques

• Avoid excessive heat during soldering

Proper installation maximizes the lifespan of Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole.

Use Case Example: Precision Control Circuit

Practical Scenario

• Application: Precision control and feedback circuit

• Design Requirement: Stable resistance with minimal drift

• Component Used: 271-5.76K-RC Metal Film Resistors - Through Hole by Xicon

• Outcome: Improved circuit accuracy and long-term reliability

This example highlights the importance of Metal Film Resistors - Through Hole in professional electronic designs.

Datasheet Information

For complete electrical specifications, mechanical dimensions, and environmental ratings, refer to the official Xicon datasheet provided by authorized distributors.

Why Buy 271-5.76K-RC Metal Film Resistors from XON?

When sourcing 271-5.76K-RC Metal Film Resistors - Through Hole by Xicon from XON, you benefit from:

• Authentic Xicon components

• Competitive pricing for bulk and single orders

• Fast worldwide delivery

• Dedicated technical and customer support

Order securely from www.xonelec.com, x-on electronics, or xon electronics for dependable Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole.

FAQs – 271-5.76K-RC Metal Film Resistors

What type of resistor is the 271-5.76K-RC?

It is a metal film resistor designed for through-hole PCB mounting.

Is this resistor suitable for precision applications?

Yes, it offers stable resistance and low noise performance.

Can it be used in industrial electronics?

Yes, it supports standard industrial operating conditions.

Does it fit standard PCB designs?

Yes, it is compatible with standard through-hole layouts.

Where can I buy this resistor online?

You can purchase it from www.xonelec.com with global shipping.

Conclusion

The 271-5.76K-RC Metal Film Resistors - Through Hole by Xicon deliver excellent accuracy, durability, and electrical stability. As a reliable solution within Passive Components, Resistors, Film Resistors, Metal Film Resistors - Through Hole, they are ideal for engineers and designers seeking dependable resistor performance in professional electronic systems.

280514 Headers & Wire Housings by TE Connectivity – Compact and Reliable Connectivity

The Headers & Wire Housings 280514 by TE Connectivity are engineered to deliver stable electrical connections in compact electronic assemblies. Designed for durability, precision mating, and efficient signal transmission, these components are widely used across industrial, automotive, and consumer electronics applications.

As a proven solution in Connectors and Headers & Wire Housings, the 280514 ensures reliable mechanical retention and consistent electrical performance. Engineers choose this connector for projects requiring space efficiency, vibration resistance, and long-term reliability.

In this blog, we’ll explore specifications, features, applications, wiring guidance, datasheet access, and FAQs, along with sourcing options from www.xonelec.com supported by x-on electronics and xon electronics.

Technical Specifications of 280514

• Manufacturer: TE Connectivity

• Part Number: 280514

• Product Type: Headers & Wire Housings

• Connector System: Wire-to-Board / Wire-to-Wire

• Mounting Style: Through-Hole / Panel Mount (application dependent)

• Contact Material: Copper alloy

• Insulation Material: High-grade thermoplastic

• Termination Method: Crimp

• Operating Temperature: Industrial-rated range

• Category: Connectors, Headers & Wire Housings

The 280514 is designed to meet industry standards for performance, safety, and durability.

Key Features of 280514 Headers & Wire Housings

• Compact Footprint – Ideal for space-constrained PCB layouts

• Secure Locking Mechanism – Prevents accidental disconnects

• High Durability – Supports repeated mating cycles

• Efficient Assembly – Compatible with automated and manual termination

• Wide Compatibility – Trusted in Connectors and Headers & Wire Housings applications

These features make the 280514 a dependable interconnect solution for professional designs.

Applications of 280514

The 280514 Headers & Wire Housings are widely used in:

• Industrial Automation Equipment

• Consumer Electronics Assemblies

• Embedded Control Systems

• Power Distribution Units

• Communication Devices

• Wiring harness systems using Connectors

• Signal routing architectures based on Headers & Wire Housings

Its rugged design ensures consistent performance in demanding environments.

Wiring and Connection Overview

Typical wiring procedure:

• Strip wire insulation to recommended length

• Crimp terminal securely using approved tooling

• Insert terminal into housing until locked

• Mate header and housing firmly

• Inspect connection for retention and continuity

Correct termination ensures optimal performance in Connectors and Headers & Wire Housings installations using the 280514.

Use Case Scenario: Embedded Control Module

Scenario:
A product manufacturer required reliable connectors for a compact embedded control module.

Problem:
Limited space and vibration exposure caused connector failures.

Solution:
The 280514 provided secure locking and compact form factor.

Result:
Improved system stability, reduced maintenance, and increased product reliability in professional Connectors and Headers & Wire Housings environments.

Download Datasheet for 280514

Looking for dimensional drawings, electrical ratings, and assembly guidelines?

Download 280514 Datasheet from Xon Electronics 

Why Buy from Xon Electronics?

Xon Electronics supports global customers with:

• Genuine TE Connectivity Products
• Worldwide Shipping
• Competitive Pricing for Bulk Orders
• Technical Support
• Secure Checkout

Order conveniently from www.xonelec.com via x-on electronics and xon electronics.

Conclusion

The 280514 Headers & Wire Housings by TE Connectivity combine compact size, secure connectivity, and long-term durability. Designed for professional Connectors and Headers & Wire Housings applications, this solution supports high-performance electronic systems across multiple industries.

FAQs – 280514 Headers & Wire Housings

What is the primary application of 280514?

It provides reliable wire-to-board or wire-to-wire connectivity in electronic assemblies.

Is this connector suitable for vibration environments?

Yes, its secure locking mechanism ensures stable mating.

Does it support automated assembly?

Yes, it is compatible with crimp tooling and production automation.

What materials are used in the connector?

High-grade thermoplastic housing and copper alloy contacts.

Where can I purchase this connector online?

Available through trusted electronics distributors worldwide.