Introduction to CS5460A-BSZ

The Current & Power Monitors & Regulators CS5460A-BSZ by Cirrus Logic is a high-accuracy energy measurement IC designed for single-phase power monitoring applications. As a top-performing device within Semiconductors, Integrated Circuits – ICs, Power Management ICs, and Current & Power Monitors & Regulators, this IC delivers exceptional precision, stability, and efficiency.

Available globally at www.xonelec.com from trusted distributor x-on electronics, it is widely adopted in metering and smart energy management systems.

Technical Specifications

• Manufacturer: Cirrus Logic

• Part Number: CS5460A-BSZ

• Category: Semiconductors, Integrated Circuits – ICs, Power Management ICs, Current & Power Monitors & Regulators

• Function: Energy measurement IC for single-phase systems

• ADC: 24-bit ?S (Delta-Sigma)

• Measurement: Voltage, current, power, and energy

• Interface: Serial (SPI-compatible)

• Package: SOIC-24

Key Features

• High-resolution 24-bit A/D converters

• Simultaneous sampling of voltage and current signals

• On-chip power calculation engine

• Built-in oscillator for simplified system design

• Low drift and high stability for long-term accuracy

• Ideal for Power Management ICs and Current & Power Monitors & Regulators applications

Applications

The CS5460A-BSZ is widely used in:

• Smart electricity meters

• Industrial automation

• Energy monitoring systems

• Home appliance power measurement

• Renewable power control units

• Embedded systems requiring Semiconductors and Power Management ICs precision

Circuit Diagram Overview

Integration Notes

• Use proper filtering for ADC inputs

• Isolate high-voltage measurement lines

• Ensure SPI interface is noise-protected

• Follow reference PCB layouts for Current & Power Monitors & Regulators

Use Case Example

A smart metering company integrated the CS5460A-BSZ into its next-generation single-phase digital meter. The result:

• Enhanced long-term measurement accuracy

• Reduced calibration needs

• Lower system cost due to integrated oscillator

• Improved reliability and data precision

This demonstrates its value across Integrated Circuits – ICs and Power Management ICs applications.

Datasheet Download

Download CS5460A-BSZ Datasheet

Why Buy from XON Electronics?

Ordering from xon electronics provides:

• Genuine Cirrus Logic components

• Global shipping to USA, India, Australia, Europe, and more

• Competitive pricing and bulk supply

• Fast support for all Semiconductors and IC requirements

• Secure and reliable procurement

FAQ

Q1. Is CS5460A-BSZ suitable for single-phase meters?
Yes, it is engineered specifically for single-phase energy metering.

Q2. What communication interface does it use?
It uses an SPI-compatible serial interface.

Q3. Does it include internal power calculation?
Yes, it has a built-in computation engine for power parameters.

Q4. Where can I buy it?
You can order at www.xonelec.com with worldwide delivery.

Conclusion

The CS5460A-BSZ Current & Power Monitors & Regulators by Cirrus Logic is a high-precision IC ideal for energy measurement and monitoring applications. As a leading choice in Semiconductors, Integrated Circuits – ICs, Power Management ICs, and Current & Power Monitors & Regulators, it offers unmatched performance and reliability.

Order globally from www.xonelec.com today.

Introduction to 1SS133M R0

The Diodes - General Purpose, Power, Switching 1SS133M R0 by Taiwan Semiconductor are engineered for high-speed switching and low forward voltage drop applications. These premium components are widely used across electronic circuits requiring reliable semiconductor performance. As part of the Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, and Diodes - General Purpose, Power, Switching families, this diode delivers exceptional efficiency and stability.

Available worldwide at www.xonelec.com, the product is supplied by trusted distributor x-on electronics.

Technical Specifications

• Manufacturer: Taiwan Semiconductor

• Part Number: 1SS133M R0

• Category: Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Diodes - General Purpose, Power, Switching

• Reverse Voltage: 90V

• Forward Current: 100mA (typical)

• Package: SMD

• Features: Fast switching speed, low leakage current, low forward voltage

Key Features

• Ultra-fast switching capability

• Low VF for reduced power loss

• High reliability in continuous operation

• Compact SMD footprint for space-efficient designs

• Consistent performance across temperature variations

These features reinforce its value within Semiconductors, Discrete Semiconductors, and Diodes - General Purpose, Power, Switching applications.

Applications

The 1SS133M R0 serves a wide set of applications, including:

• Portable electronics

• Signal switching circuits

• High-frequency systems

• DC–DC converter circuits

• Low-power switching modules

This makes it a versatile choice across industries requiring efficient Diodes & Rectifiers.

Wiring and Connection Overview

Integration Tips

• Ensure correct polarity to prevent diode failure

• Maintain recommended soldering temperature for SMD placement

• Follow best practices for Semiconductors and Diodes - General Purpose, Power, Switching when designing PCB footprints

• Verify voltage ratings based on your circuit conditions

Use Case Example

A consumer electronics manufacturer integrated the 1SS133M R0 into a low-voltage switching module. The result was:

• Improved switching efficiency

• Lower power consumption

• Enhanced product lifetime

This showcases the diode’s reliability within Discrete Semiconductors and Diodes & Rectifiers designs.

Datasheet Download

Download 1SS133M R0 Datasheet

Why Buy from XON Electronics?

Purchasing through xon electronics ensures:

• Authentic Taiwan Semiconductor components

• Worldwide shipping to USA, India, Australia, Europe & more

• Competitive pricing

• Wide selection of Semiconductors, Diodes & Rectifiers, and General Purpose, Power, Switching Diodes

• Trusted, fast customer service

FAQ

Q1. Is 1SS133M R0 suitable for high-speed switching?
Yes, it is designed for ultra-fast switching applications.

Q2. Can this diode be used in power circuits?
Yes, it fits perfectly within Diodes - General Purpose, Power, Switching categories.

Q3. What package is available?
It is offered in an SMD package for compact PCB designs.

Q4. Where can I purchase it globally?
Order globally from www.xonelec.com.

Conclusion

The 1SS133M R0 Diodes - General Purpose, Power, Switching by Taiwan Semiconductor are a reliable and efficient choice for designers needing fast switching and low power loss. With strong performance across various circuit designs, it remains one of the most dependable options within Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, and General Purpose, Power, Switching Diodes categories.

Order globally today from www.xonelec.com.

EEE-FPC151XAP Aluminium Electrolytic Capacitors – SMD by Panasonic: High-Performance SMD Passive Components

The Aluminium Electrolytic Capacitors – SMD EEE-FPC151XAP by Panasonic deliver outstanding reliability, long life, and superior electrical stability for compact electronic applications. As part of Panasonic’s high-quality capacitor lineup, these Capacitors, categorized under Passive Components, offer exceptional performance in power filtering and voltage smoothing.
These Aluminium Electrolytic Capacitors are designed to perform consistently across industrial, consumer, and automotive environments.

Technical Specifications of EEE-FPC151XAP

• • Manufacturer: Panasonic
• • Series: EEE-FPC
• • Part Number: EEE-FPC151XAP
• • Type: Aluminium Electrolytic Capacitors – SMD
• • Capacitance: 150 µF
• • Voltage: 10V
• • Temperature Range: -55°C to +105°C
• • Impedance: Low Impedance Type
• • Lifetime: 2000–5000 hours
• • Category: Passive Components, Capacitors, Aluminium Electrolytic Capacitors
• DataSheetUrl

These Aluminium Electrolytic Capacitors - SMD provide stable electrical behavior, strong ripple handling, and efficient energy storage in small SMD footprints.

Key Features of EEE-FPC151XAP

• Excellent long-life stability
• High ripple current capability
• Low impedance design for modern power circuits
• Compact SMD package
• Wide temperature tolerance
• Enhanced performance for dense PCB layouts

These benefits make the EEE-FPC151XAP Aluminium Electrolytic Capacitors - SMD a top choice among Panasonic’s Passive Components.

Applications of EEE-FPC151XAP

The capacitor is widely used in:

• Power supply filtering
• Consumer electronics
• LED lighting drivers
• DC-DC converter modules
• Industrial automation boards
• Automotive systems

Across these applications, Capacitors like the EEE-FPC151XAP ensure dependable operation and long-term electrical stability.

Polarity & Mounting Overview

Correct polarity is essential for Aluminium Electrolytic Capacitors - SMD.

Positive (+): Marked on capacitor top
Negative (-): Indicated by band/stripe

Accurate orientation ensures safe operation and component durability.

Use Case Example: Compact Power Boards

A global manufacturer developing compact power modules needed Passive Components that performed reliably under temperature stress. The EEE-FPC151XAP delivered:

• Lower failure rate
• Improved ripple handling
• Compact size for tight PCB layouts

Results: enhanced efficiency and reduced circuit noise across all prototypes.

Why Buy from Xon Electronics?

Xon Electronics offers genuine Panasonic Capacitors with:

• Verified quality parts
• Worldwide shipping to USA, India, Australia, Europe & other countries
• Bulk/OEM support
• Technical guidance
• Secure online ordering

Shop today at www.xonelec.com for reliable Aluminium Electrolytic Capacitors - SMD.

Conclusion

The EEE-FPC151XAP Aluminium Electrolytic Capacitors – SMD from Panasonic are engineered for long-term reliability, efficient filtering, and space-saving circuit integration. These premium Passive Components deliver excellent performance in industrial, commercial, and high-density PCB applications.
For trusted sourcing and worldwide delivery, buy from Xon Electronics.

FAQs – EEE-FPC151XAP Aluminium Electrolytic Capacitors – SMD

Q1. What is the capacitance and voltage rating of EEE-FPC151XAP?
150 µF at 10V.

Q2. Is this capacitor suitable for high-temperature applications?
Yes, it supports up to +105°C.

Q3. What category does it fall under?
It is part of Passive Components, specifically Aluminium Electrolytic Capacitors – SMD.

Q4. Where can I buy this capacitor globally?
Available at www.xonelec.com, shipping to USA, India, Australia, Europe & more.

Q5. What type of circuits commonly use this capacitor?
Power supply filtering, LED drivers, DC-DC converters, and industrial electronics.

Introduction to 111038G3 Extraction, Removal & Insertion Tools

The Extraction, Removal & Insertion Tools 111038G3 by Anderson Power Products are engineered for technicians who require precision, durability, and ease of operation. As part of the Tools & Supplies, Tools, and Extraction, Removal & Insertion Tools category, this specialized tool ensures safe and accurate connector servicing across industrial and electrical systems.

These tools are available globally through www.xonelec.com, supported by renowned supplier x-on electronics.

Technical Specifications of 111038G3

• Manufacturer: Anderson Power Products

• Part Number: 111038G3

• Category: Tools & Supplies, Tools, Extraction, Removal & Insertion Tools

• Primary Use: Terminal extraction and insertion

• Compatible Systems: Anderson Power modular connectors

• Material: High-strength tool-grade metal

• Design: Ergonomic and durable for repeated use

Key Features of 111038G3 Extraction Tool

• High precision for safe connector terminal removal

• Ergonomic handle ensures user comfort

• Designed for long service life in demanding environments

• Compatible with a wide range of Anderson Power connectors

• Reduces risk of damage to terminals and housings

These features make it a top choice in Tools & Supplies and Extraction, Removal & Insertion Tools.

Applications of the 111038G3 Tool

This professional-grade tool excels in:

• Electrical assembly work

• Maintenance of modular power connectors

• Industrial automation wiring

• Data center power systems

• Field servicing and troubleshooting

It ensures quick, safe operations without compromising connector integrity.

Wiring and Connection Overview

Usage Guidelines

• Align tool tip with the connector terminal channel

• Apply gentle pressure while disengaging locking tabs

• Avoid excessive force to prevent terminal deformation

• Use approved insertion techniques for reinstallation

• Follow best practices for Tools & Supplies in electrical maintenance

Use Case Scenario: Industrial Connector Maintenance

A manufacturing plant required a dependable solution for frequent terminal servicing. The 111038G3 Extraction, Removal & Insertion Tools provided:

• Fast removal and insertion cycles

• Zero damage to connector housings

• High repeatability for maintenance engineers

Its reliability significantly improved workflow efficiency.

Download Datasheet for 111038G3

Download 111038G3 Datasheet

Why Buy from XON Electronics?

Purchasing from xon electronics ensures:

• Authentic Anderson Power Products tools

• Global shipping to USA, India, Australia, Europe & more

• Affordable prices and genuine stock

• Wide range of Tools & Supplies, Tools, and Extraction, Removal & Insertion Tools

• Trusted delivery & customer support

FAQ – 111038G3 Extraction, Removal & Insertion Tools

Q1. Is this tool compatible with all Anderson Power connectors?
Yes, it is designed for a broad range of modular systems.

Q2. Can it be used for re-insertion?
Yes, it supports both extraction and re-insertion operations.

Q3. Is the tool durable?
Its metal construction ensures long operational life.

Q4. Where can I buy it worldwide?
At www.xonelec.com with fast global shipping.

Conclusion

The 111038G3 Extraction, Removal & Insertion Tools by Anderson Power Products is a critical accessory for engineers working with modular power connectors. It excels in precision, durability, and efficiency, making it a standout option within Tools & Supplies, Tools, and Extraction, Removal & Insertion Tools.

Order today at www.xonelec.com with worldwide delivery.

Introduction to R463F310040M1M Safety Capacitors

The Safety Capacitors R463F310040M1M by Kemet are high-reliability film capacitors engineered for applications requiring superior safety, stability, and electrical endurance. Designed to meet stringent global safety standards, they belong to essential categories such as Passive Components, Capacitors, and Safety Capacitors.

These premium Kemet components are available globally at www.xonelec.com, supplied by trusted distributor x-on electronics.

Technical Specifications of R463F310040M1M

• Manufacturer: Kemet

• Part Number: R463F310040M1M

• Category: Passive Components, Capacitors, Safety Capacitors

• Capacitance: 0.1 µF (100 nF)

• Voltage Rating: 310 VAC

• Dielectric Type: Metallized polypropylene film

• Certification: Class X2 safety rated

• Tolerance: ±10%

• Operating Temperature: Up to +110°C

• Mounting: Through-hole leaded

These specifications make it ideal for across-the-line EMI/RFI suppression and AC mains safety applications.

Key Features of R463F310040M1M Safety Capacitors

• Certified Safety Capacitor solution for EMI suppression

• High surge voltage capability

• Metallized film technology for excellent reliability

• Flame-retardant epoxy encapsulation

• Optimized for long-term AC mains operation

• Compact design suitable for tight PCB layouts

These features position the capacitor as a top performer within Passive Components and Capacitors categories.

Applications of R463F310040040M1M

This Kemet capacitor is widely used in:

• AC power filtering

• Home appliances

• SMPS power supplies

• EMI/RFI suppression circuits

• Industrial control equipment

• Power distribution electronics

Its stringent safety compliance makes it a preferred choice among Safety Capacitors for global OEMs.

Wiring and Connection Overview

Installation Guidelines

• Ensure correct clearance and creepage distances on PCB

• Mount away from high-heat components to preserve reliability

• Use in accordance with AC mains safety standards

• Maintain proper lead spacing for secure soldering

• Follow Class X2 application guidelines for enhanced safety

These best practices improve performance in circuits utilizing Safety Capacitors and other Passive Components.

Use Case Scenario: EMI Filtering in Power Adapters

A manufacturer of AC/DC power adapters needed a highly reliable X2-rated capacitor to meet international EMI compliance. The R463F310040M1M provided:

• Strong EMI suppression

• Long-life stability under continuous AC operation

• Certified safety performance

This made it the perfect fit for consumer power electronics.

Download Datasheet for R463F310040M1M

Download R463F310040M1M Datasheet

Why Buy from XON Electronics?

Ordering from xon electronics offers:

• Authentic Kemet components

• Global shipping to USA, India, Australia, Europe & more

• Competitive pricing with reliable stock

• Access to a wide range of Passive Components and Safety Capacitors

• Fast customer support and secure sourcing

FAQ – R463F310040M1M Safety Capacitors

Q1. What safety class does the R463F310040M1M meet?
It meets Class X2 requirements for across-the-line AC filtering.

Q2. Can this capacitor be used in SMPS circuits?
Yes, it is commonly used for EMI suppression in SMPS designs.

Q3. Does it support high surge events?
Yes, metallized polypropylene provides excellent surge handling.

Q4. Where can I buy it worldwide?
From www.xonelec.com with global delivery.

Conclusion

The R463F310040M1M Safety Capacitors by Kemet deliver exceptional reliability, safety compliance, and electrical endurance for AC filtering and EMI suppression circuits. As a leading component in Passive Components, Capacitors, and Safety Capacitors, it is an excellent choice for industrial, consumer, and automotive applications.

Purchase it today at www.xonelec.com with fast global shipping.

Introduction to MOC3043/ROHS Optocoupler

The Optocoupler MOC3043/ROHS by Isocom is a high-performance, zero-crossing optoisolator widely used for AC load switching and control applications. Designed for safe and efficient isolation between low-voltage and high-voltage circuits, this device belongs to key categories such as Optoelectronics and Triac & SCR Output Optocouplers. Its robust design ensures reliable switching in demanding electronic systems.

This device is globally available at www.xonelec.com, supported by trusted supplier x-on electronics.

Technical Specifications of MOC3043/ROHS

• Manufacturer: Isocom

• Part Number: MOC3043/ROHS

• Category: Optoelectronics, Triac & SCR Output Optocouplers

• Function: Zero-cross optocoupler for AC load control

• Isolation Voltage: 7500 Vpk (typical)

• Triggering Mode: Zero-cross switching

• LED Forward Current: 30 mA max

• Output Type: Triac driver output

• Package: 6-Pin DIP

These features make it ideal for safe electrical isolation and reliable AC load switching.

Key Features of MOC3043/ROHS Optocoupler

• Zero-crossing functionality for noise-free AC switching

• High isolation voltage for enhanced safety

• Stable output triggering for triac-based loads

• Compact 6-pin DIP package for easy PCB integration

• Long-term reliability for industrial and consumer applications

Its design makes it a top choice among Triac & SCR Output Optocouplers within the Optoelectronics category.

Applications of MOC3043/ROHS

This optocoupler is widely used in:

• AC motor controls

• Solid-state relays

• Lamp and dimmer control

• Heating and temperature control units

• Home automation modules

• Industrial switching circuits

Its high reliability makes it essential for systems requiring dependable AC load isolation.

Wiring and Connection Overview

Integration Guidelines

• Use an appropriate current-limiting resistor for the LED input

• Ensure the triac driver output is connected to a compatible triac

• Maintain proper PCB clearance for high-voltage isolation

• Follow Isocom’s recommended thermal guidelines

• Apply snubber networks when switching inductive loads

Following these steps ensures optimal performance of Triac & SCR Output Optocouplers in real-world designs.

Use Case Scenario: Smart Home Dimmer Modules

A home automation manufacturer required a safe and reliable way to control AC lighting. The MOC3043/ROHS provided:

• Zero-cross switching for flicker-free dimming

• High isolation for user safety

• Compact footprint for slim module designs

This made it ideal for modern energy-efficient smart home systems.

Download Datasheet for MOC3043/ROHS

Download MOC3043/ROHS Datasheet

Why Buy from XON Electronics?

Choosing xon electronics ensures:

• 100% original Isocom components

• Global delivery to USA, India, Australia, Europe & more

• Competitive pricing and verified stock

• Fast shipping and excellent customer support

• Access to a wide selection of Optoelectronics and Triac & SCR Output Optocouplers

FAQ – MOC3043/ROHS Optocoupler

Q1. Is this optocoupler suitable for AC loads?
Yes, its zero-cross feature is optimized for AC switching.

Q2. Can it drive triacs directly?
Yes, it includes a triac-compatible output stage.

Q3. Does it offer high isolation?
The device supports high isolation for safe circuit separation.

Q4. Where can I buy it?
Order from www.xonelec.com with worldwide delivery.

Conclusion

The MOC3043/ROHS Optocoupler by Isocom delivers excellent electrical isolation, stable AC switching, and long-term reliability. As a core component in Optoelectronics and Triac & SCR Output Optocouplers, it is ideal for industrial, consumer, and automation applications.

Purchase it today at www.xonelec.com with fast global shipping.

Introduction to PIC16F505-I/P 8-bit Microcontrollers

The 8-bit Microcontrollers - MCU PIC16F505-I/P by Microchip is a compact, high-performance microcontroller designed for embedded system applications requiring low power consumption and robust performance. This device is widely used across categories such as Semiconductors, Integrated Circuits – ICs, Embedded Processors & Controllers, Microcontrollers – MCU, and 8-bit Microcontrollers – MCU, making it a reliable choice for designers worldwide.

This microcontroller is available with global shipping at www.xonelec.com through trusted supplier x-on electronics.

Technical Specifications of PIC16F505-I/P

• Manufacturer: Microchip Technology

• Part Number: PIC16F505-I/P

• Category: Semiconductors, Integrated Circuits – ICs, Microcontrollers – MCU, 8-bit Microcontrollers – MCU

• Architecture: 8-bit PIC®

• Memory: 1.75 KB Flash, 48 Bytes RAM

• I/O Pins: 6 GPIO

• Operating Voltage: 2V – 5.5V

• Timers: Two 8-bit timers

• Oscillator: Internal oscillator up to 4 MHz

• Package: DIP-14 (through-hole)

These specifications make it one of the most reliable and versatile low-pin-count MCUs.

Key Features of PIC16F505-I/P 8-bit Microcontrollers

• Compact 14-pin package ideal for space-constrained designs

• Low power operation for battery-driven applications

• Direct drive capability for LEDs and low-power actuators

• Simple instruction set for easy firmware development

• Internal oscillator eliminates external crystal requirement

• Enhanced electrical robustness for industrial use

These features help it excel among Microcontrollers – MCU and 8-bit Microcontrollers – MCU.

Applications of PIC16F505-I/P

This Microchip MCU is popular in:

• Small appliances

• Sensor interface circuits

• LED control modules

• Industrial automation

• Battery-powered systems

• Simple embedded controllers

Its efficiency and compact design make it ideal for both consumer and industrial sectors of Embedded Processors & Controllers.

Wiring and Connection Overview

Integration Tips

• Use a decoupling capacitor near VDD for noise-free operation

• Configure GPIO pins based on input/output needs

• Properly set internal oscillator settings for accurate timing

• Maintain clean grounding for MCU stability

• Follow recommended PCB layout guidelines for 8-bit Microcontrollers – MCU

These practices ensure high reliability in embedded applications.

Use Case Scenario: Low-Power IoT Sensor Node

A designer needed a simple yet reliable controller for a battery-powered IoT sensor. The PIC16F505-I/P offered:

• Low power consumption

• Enough GPIO for sensor interfacing

• Easy firmware programming

• DIP package for quick prototyping

This made it the perfect fit for cost-effective IoT solutions.

Download Datasheet for PIC16F505-I/P

Download PIC16F505-I/P Datasheet

Why Buy from XON Electronics?

Purchasing through xon electronics ensures:

• Genuine Microchip components

• Worldwide delivery to USA, India, Australia, Europe & more

• Competitive pricing and secure sourcing

• Access to thousands of Semiconductors and Integrated Circuits – ICs

• Excellent customer support and fast dispatch

FAQ – PIC16F505-I/P Microcontroller

Q1. Is the PIC16F505-I/P suitable for battery-powered devices?
Yes, it is designed for low-power efficiency.

Q2. Does it require an external oscillator?
No, it includes a built-in 4 MHz oscillator.

Q3. Is it good for beginners?
Absolutely—its simple architecture is ideal for learning microcontrollers.

Q4. Where can I purchase it?
At www.xonelec.com with global delivery.

Conclusion

The PIC16F505-I/P 8-bit Microcontrollers - MCU by Microchip offers exceptional performance, simplicity, and power efficiency. As a leading component in Semiconductors, Integrated Circuits – ICs, Embedded Processors & Controllers, Microcontrollers – MCU, and 8-bit Microcontrollers – MCU, it is an ideal solution for both simple and advanced embedded designs.

Order yours today from www.xonelec.com with fast worldwide shipping.

EEE-FK1H101P Aluminium Electrolytic Capacitors – SMD by Panasonic

The Aluminium Electrolytic Capacitors – SMD EEE-FK1H101P by Panasonic are trusted components widely used across industrial electronics, consumer devices, communication systems, and power regulation circuits. These capacitors offer superior stability, low ESR characteristics, and long-lasting performance. If you are searching for durable Passive Components, reliable Capacitors, or high-performance Aluminium Electrolytic Capacitors – SMD, this Panasonic series stands out for both quality and efficiency.

Explore the detailed specifications, features, applications, and benefits of the EEE-FK1H101P along with genuine purchasing options via www.xonelec.com (also known as X-ON Electronics / XON Electronics).

Technical Specifications of EEE-FK1H101P

Key Electrical & Physical Specifications

• Manufacturer: Panasonic

• Part Number: EEE-FK1H101P

• Type: Aluminium Electrolytic Capacitors – SMD

• Capacitance: 100 µF

• Voltage Rating: 50V

• ESR: Low ESR design suitable for high-frequency applications

• Operating Temperature: –40°C to +105°C

• Category: Passive Components, Capacitors, Aluminium Electrolytic Capacitors, Aluminium Electrolytic Capacitors – SMD

• Applications: Power supplies, automation devices, telecom modules, embedded systems

• DataSheetUrl

The capacitor's compact size and optimal ripple performance make it widely used in space-constrained PCB layouts.

Key Features of EEE-FK1H101P Capacitors

Why Engineers Prefer Panasonic EEE-FK Series

• Long-life durability and stable capacitance

• Low ESR ideal for switching-power circuits

• High ripple current capability

• Surface-mount design for automated assembly

• Excellent reliability under harsh conditions

These features make the EEE-FK1H101P one of the most preferred Capacitors in industrial and commercial electronics.

Applications of EEE-FK1H101P

Where These Capacitors Are Commonly Used

• Power supply filtering & smoothing

• Industrial automation equipment

• Communication and networking devices

• Consumer electronics

• LED drivers & lighting control systems

• DC-DC converter modules

Engineers choose these Aluminium Electrolytic Capacitors – SMD for consistency and longevity across crucial circuit applications.

Performance & Use Case Example

Use Case: Industrial Power Regulation Module

A manufacturer required high-reliability Aluminium Electrolytic Capacitors for voltage smoothing in a 50V power stage. The EEE-FK1H101P provided:

• Lower heat generation

• Increased stability

• Reduced noise

• Improved overall efficiency

Result: Higher product reliability and long-term operational consistency.

Why Buy EEE-FK1H101P from XON Electronics?

When sourcing Passive Components like Aluminium Electrolytic Capacitors – SMD, it’s essential to buy from trusted suppliers.
XON Electronics (access via www.xonelec.com) offers:

• 100% Genuine Panasonic Components

• Worldwide Shipping – USA, India, Australia, Europe & more

• Competitive Pricing for OEMs and Distributors

• Fast Delivery & Technical Support

Purchase confidently from XON Electronics for your next project.

Conclusion

The EEE-FK1H101P Aluminium Electrolytic Capacitors – SMD by Panasonic are excellent for high-performance circuits requiring low ESR, long life, and consistent output. Whether you are designing power modules, communication boards, or embedded electronics, this component brings reliability and superior stability.

For genuine components with global shipping options, explore www.xonelec.com for the best availability.

Introduction to LTST-S270KRKT Standard LEDs - SMD

The Standard LEDs - SMD LTST-S270KRKT by Lite-On is a compact and highly efficient surface-mount LED designed for reliable visual indication in a wide range of electronic devices. Engineered for precision and durability, this LED belongs to key product categories such as Optoelectronics, LED Lighting, LED Emitters, and Standard LEDs - SMD. Its small footprint and bright output make it ideal for modern compact circuit designs.

This component is available globally through www.xonelec.com, supplied by trusted distributor x-on electronics.

Technical Specifications of LTST-S270KRKT

• Manufacturer: Lite-On

• Part Number: LTST-S270KRKT

• Category: Optoelectronics, LED Lighting, LED Emitters, Standard LEDs - SMD

• Color: Red

• Lens Type: Water-clear

• Mounting Type: SMD (Surface Mount Device)

• Package Size: 2.0 mm × 1.25 mm

• Wavelength: ~631 nm (typical)

• Viewing Angle: 120°

• Drive Current: Low-power indicator LED

With precise light output and a compact package, this LED integrates seamlessly into high-density circuit boards.

Key Features of LTST-S270KRKT

• High brightness with consistent optical performance

• Low power consumption for energy-efficient designs

• Compact SMD footprint suitable for dense PCB layouts

• Wide viewing angle ideal for indicator applications

• High reliability for long-term illumination

These features make it an excellent choice for applications across Optoelectronics, LED Emitters, and Standard LEDs - SMD.

Applications of LTST-S270KRKT

This LED is widely used across:

• Consumer electronics

• Battery-powered devices

• Communication equipment

• Industrial control panels

• Wearable technology

• Smart home devices

Its efficiency and small size make it one of the best options in LED Lighting and Standard LEDs - SMD.

Wiring and Connection Overview

Integration Guidelines

• Use proper soldering profiles as recommended by Lite-On

• Avoid excessive current to prevent LED degradation

• Maintain proper polarity to ensure correct illumination

• Ensure thermal management for extended LED lifetime

• Follow ESD precautions during installation

These practices ensure reliability when integrating Standard LEDs - SMD into electronic designs.

Use Case Scenario: Compact Indicators in IoT Devices

A global IoT device manufacturer required a bright yet compact status indicator for a wearable device. The LTST-S270KRKT delivered:

• Brilliant red illumination

• Small footprint for miniaturized PCB designs

• Low power usage suitable for battery-operated products

This made it an optimal selection for low-power IoT solutions.

Download Datasheet for LTST-S270KRKT

Download LTST-S270KRKT Datasheet

Why Buy from XON Electronics?

Ordering from xon electronics provides:

• 100% original Lite-On components

• Global delivery to USA, India, Australia, Europe & more

• Competitive pricing with reliable stock availability

• Fast shipping and excellent customer support

• Access to thousands of Optoelectronics and LED Emitters

FAQ – LTST-S270KRKT Standard LEDs - SMD

Q1. What color does the LTST-S270KRKT emit?
It emits a bright red illumination.

Q2. Is this LED suitable for compact electronic devices?
Yes, its SMD package is optimized for small PCBs.

Q3. Does it work in low-power circuits?
Absolutely—its efficiency makes it ideal for battery-powered devices.

Q4. Where can I buy it?
At www.xonelec.com with worldwide delivery.

Conclusion

The LTST-S270KRKT Standard LEDs - SMD by Lite-On offers high brightness, energy efficiency, and exceptional reliability. As a key component in Optoelectronics, LED Lighting, LED Emitters, and Standard LEDs - SMD, it is an excellent solution for modern electronic designs.

Purchase it today at www.xonelec.com with fast global delivery.

Introduction to BQ24073RGTR Battery Management

The Battery Management BQ24073RGTR by Texas Instruments is a highly efficient, single-cell Li-Ion/Li-Polymer charger and power-path management IC designed for portable electronics. Known for its reliability and advanced protection features, this IC is widely used across applications requiring safe and stable power control. It is commonly categorized under Semiconductors, Integrated Circuits – ICs, Power Management ICs, and Battery Management, making it an essential component in modern power-driven designs.

This product is available worldwide through www.xonelec.com, powered by trusted global distributor x-on electronics.

Technical Specifications of BQ24073RGTR

• Manufacturer: Texas Instruments

• Part Number: BQ24073RGTR

• Category: Semiconductors, Integrated Circuits - ICs, Power Management ICs, Battery Management

• Function: Linear charger with power-path control

• Input Voltage: Up to 6.5V

• Battery Type: Single-cell Li-Ion/Li-Polymer

• Charge Current: Programmable

• Safety Features: Overtemperature protection, thermal regulation, power-path control

• Package: 16-VQFN

Designed for efficiency and safety, the BQ24073RGTR is a top-tier Battery Management IC.

Key Features of BQ24073RGTR Battery Management IC

• Integrated power-path management

• Programmable charge rate for flexible design

• Thermal protection to ensure safe operation

• Reverse current blocking for added safety

• Optimized for portable and rechargeable devices

• Supports USB and adapter input sources

These features solidify its position in Power Management ICs and advanced Battery Management systems.

Applications of BQ24073RGTR

This highly efficient IC is ideal for:

• Portable medical devices

• Industrial handheld tools

• Rechargeable sensor modules

• Consumer electronics

• Wireless communication devices

• Wearables and IoT hardware

Its strong performance makes it one of the most reliable choices in Semiconductors and Battery Management applications.

Wiring and Connection Overview

Key Integration Guidelines

• Ensure proper thermal dissipation for high-current charging

• Configure programmable resistors for the correct charging rate

• Keep analog and power paths separated for noise reduction

• Maintain proper grounding for optimal Battery Management stability

• Follow TI reference designs for best performance

These practices ensure stable and efficient integration into portable systems.

Use Case Scenario: Portable Health Monitoring Device

A manufacturer developing a handheld health monitoring device required safe charging and seamless power switching. The BQ24073RGTR provided:

• Safe power-path management

• Reliable battery charging

• Compact size for small enclosures

This resulted in higher device uptime and improved user reliability.

Download Datasheet for BQ24073RGTR

Download BQ24073RGTR Datasheet

Why Buy from XON Electronics?

Purchasing from xon electronics ensures:

• Verified, genuine Texas Instruments components

• Global shipping to USA, India, Australia, Europe & more

• Competitive pricing and fast processing

• Access to thousands of Semiconductors and Power Management ICs

• Dedicated customer support team

FAQ – BQ24073RGTR Battery Management IC

Q1. What battery type does BQ24073RGTR support?
Single-cell Li-Ion/Li-Polymer batteries.

Q2. Does it include thermal protection?
Yes, it integrates thermal regulation and safety features.

Q3. Can it manage USB-powered charging?
Yes, it supports USB and adapter input modes.

Q4. Where can I order it globally?
At www.xonelec.com.

Conclusion

The BQ24073RGTR Battery Management by Texas Instruments is a powerful, compact, and highly reliable solution for single-cell charging and power-path control. As a leading component in Semiconductors, Integrated Circuits - ICs, Power Management ICs, and Battery Management, it ensures optimal performance for portable and rechargeable devices.

Order now at www.xonelec.com with fast worldwide delivery.