NJM4558L Operational Amplifiers – Op Amps by JRC – High-Quality Dual Amplifier for Audio & Analog Precision

The Operational Amplifiers – Op Amps NJM4558L by JRC are high-performance dual Op Amps designed for audio circuits, precision analog signal processing, and instrumentation systems. As part of the Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps category, the NJM4558L delivers low noise, strong output drive capability, and stable performance under a wide range of operating conditions.

Now available at www.xonelec.com, the NJM4558L is a trusted choice for engineers who require reliable and distortion-free amplification.

Technical Specifications of NJM4558L

• Manufacturer: JRC

• Part Number: NJM4558L

• Type: Dual Operational Amplifiers – Op Amps

• Supply Voltage Range: ±4V to ±18V

• Input Noise Voltage: 8 nV/vHz

• Slew Rate: 1 V/µs

• Gain Bandwidth Product: 3 MHz

• Package Type: DIP-8

• Category: Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps

This amplifier offers a balance between audio clarity and general-purpose analog performance, making it suitable for a wide variety of electronic applications.

Key Features of NJM4558L Op Amps

• Low noise operation for clean signal amplification

• High output drive capability

• Low distortion, ideal for audio applications

• Wide supply voltage compatibility

• High stability for precision analog circuits

These benefits make the NJM4558L an essential part of many Amplifier ICs and Operational Amplifiers – Op Amps used in Semiconductors designs.

Applications of NJM4558L

The NJM4558L Operational Amplifiers – Op Amps by JRC are widely used in:

• Audio preamplifiers and mixers

• Active filters and equalizers

• Analog signal conditioning

• Industrial measurement circuits

• Control systems and automation devices

As part of the Integrated Circuits – ICs family, this Op Amp supports both audio and non-audio precision requirements.

Wiring and Connection Overview

The standard dual-Op Amp pin configuration includes:

• IN+ / IN-: Input terminals

• OUT: Amplifier output for each channel

• V+ / V-: Supply voltage pins

This simple and familiar layout allows seamless integration into boards using Operational Amplifiers – Op Amps or other Amplifier ICs.

Use Case Scenario: Precision Audio Processing Unit

Scenario: A designer needed a reliable and low-noise amplifier for an audio equalizer.
Problem: Previous components introduced distortion at mid-high frequencies.
Solution: The NJM4558L Operational Amplifiers – Op Amps by JRC provided clean, distortion-free amplification.
Result: Improved clarity, low noise, and stable frequency performance.

This demonstrates why the NJM4558L remains a popular choice for Semiconductors and Amplifier ICs projects requiring consistent results.

Download Datasheet for NJM4558L

For full electrical characteristics and circuit examples:
Download the NJM4558L Datasheet from XON Electronics.

Also Available from Other Manufacturers

Comparable alternatives to the NJM4558L are available at XON Electronics from:

• Nisshinbo

These alternatives provide options across a wide range of Operational Amplifiers – Op Amps and Integrated Circuits – ICs.

Why Buy from XON Electronics?

Order from www.xonelec.com and enjoy:

• 100% original JRC components
• Global delivery: USA, India, Australia, Europe & more
• Bulk and OEM pricing available
• Professional sourcing for hard-to-find parts
• Safe online ordering & quick dispatch

Choose the NJM4558L Operational Amplifiers – Op Amps by JRC for dependable, high-quality analog and audio performance.

FAQs – NJM4558L Operational Amplifiers – Op Amps

Q1: Is NJM4558L suitable for audio applications?
A: Yes, it offers low noise and low distortion ideal for audio designs.

Q2: What package type is used?
A: DIP-8.

Q3: What is the typical gain bandwidth?
A: 3 MHz.

Q4: Does it support dual supply operation?
A: Yes, ±4V to ±18V.

Q5: Where to buy globally?
A: At www.xonelec.com, with shipping to USA, India, Australia, Europe, and more.

Conclusion

The NJM4558L Operational Amplifiers – Op Amps by JRC deliver excellent performance for audio and general-purpose analog circuits. As a key member of the Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps category, it ensures stable, accurate, and high-quality signal amplification.

Buy today from www.xonelec.com and boost your audio and analog system designs.

NJM4558M-TE1 Operational Amplifiers – Op Amps by JRC – High-Performance Dual Amplifier for Audio & Signal Processing

The Operational Amplifiers – Op Amps NJM4558M-TE1 by JRC are high-performance dual operational amplifiers widely used in audio circuits, signal conditioning, instrumentation, and precision analog designs. As part of the Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps category, this IC delivers low noise, smooth frequency response, and exceptional stability, making it a preferred choice for engineers and product designers.

Available now at www.xonelec.com, the NJM4558M-TE1 is ideal for applications requiring reliable, distortion-free amplification.

Technical Specifications of NJM4558M-TE1

• Manufacturer: JRC

• Part Number: NJM4558M-TE1

• Type: Dual Operational Amplifiers – Op Amps

• Supply Voltage Range: ±4V to ±18V

• Input Noise Voltage: 8 nV/vHz

• Slew Rate: 1 V/µs

• Gain Bandwidth Product: 3 MHz

• Package: SOP-8

• Category: Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps

With a balance of performance, efficiency, and reliability, the NJM4558M-TE1 is a versatile choice for both audio and general-purpose analog circuits.

Key Features of NJM4558M-TE1

• Low noise for improved signal clarity

• Stable frequency response across a wide bandwidth

• High output drive capability

• Low distortion amplification

• Ideal for audio and instrumentation circuits

These strengths place the NJM4558M-TE1 among the most trusted Amplifier ICs and Operational Amplifiers – Op Amps in the Semiconductors category.

Applications of NJM4558M-TE1

The NJM4558M-TE1 Operational Amplifiers – Op Amps by JRC are commonly used in:

• Audio preamplifiers and mixers

• Active filters and equalizers

• Signal conditioning circuits

• Measurement instruments

• Control systems and automation electronics

As part of the Integrated Circuits – ICs family, these Operational Amplifiers – Op Amps support high-precision and low-noise analog circuit design.

Wiring and Connection Overview

The typical dual-op amp pin configuration includes:

• IN+ / IN-: Input terminals for both channels

• OUT: Output pins

• V+ / V-: Supply rails

This standard arrangement ensures easy integration into boards using Amplifier ICs or other Semiconductors.

Use Case Scenario: Audio Mixer Enhancement

Scenario: A professional audio mixer required low-noise preamp stages.
Problem: Legacy amplifiers introduced distortion at high gain levels.
Solution: The NJM4558M-TE1 Operational Amplifiers – Op Amps by JRC delivered consistent, low-distortion amplification.
Result: Enhanced sound clarity, improved gain levels, and stable long-term operation.

This demonstrates the IC’s dependability in high-performance Amplifier ICs applications.

Download Datasheet for NJM4558M-TE1

For detailed electrical characteristics and application circuits:
Download the NJM4558M-TE1 Datasheet from XON Electronics.

Also Available from Other Manufacturers

XON Electronics also provides alternatives to the NJM4558M-TE1, including compatible options from:

• Nisshinbo

These alternatives support a wide range of Operational Amplifiers – Op Amps and Integrated Circuits – ICs applications.

Why Buy from XON Electronics?

Purchase at www.xonelec.com to enjoy:

• 100% genuine JRC components
• Worldwide delivery: USA, India, Australia, Europe & more
• Bulk and OEM procurement support
• Expert sourcing for hard-to-find ICs
• Secure and fast checkout

Choose the NJM4558M-TE1 Operational Amplifiers – Op Amps by JRC to ensure consistent performance and high-quality signal amplification.

FAQs – NJM4558M-TE1 Operational Amplifiers – Op Amps

Q1: Is the NJM4558M-TE1 suitable for audio applications?
A: Yes, it provides low-noise and low-distortion output required for audio designs.

Q2: What is the typical supply voltage?
A: ±4V to ±18V.

Q3: What package does it use?
A: SOP-8.

Q4: Can it drive high-output loads?
A: Yes, it has a strong output drive capability.

Q5: Where can I buy it globally?
A: At www.xonelec.com, shipping worldwide including USA, India, Australia, and Europe.

Conclusion

The NJM4558M-TE1 Operational Amplifiers – Op Amps by JRC deliver dependable performance with low noise, stable gain, and excellent signal integrity. As a key device within the Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps category, it is an optimal choice for audio and precision analog systems.

Get your NJM4558M-TE1 today from www.xonelec.com and enhance your electronic design with proven JRC quality.

NJM4580DD Audio Amplifiers by Nisshinbo – High-Performance Dual Audio IC for Superior Sound Quality

The Audio Amplifiers NJM4580DD by Nisshinbo are high-performance dual audio amplifiers designed for professional audio equipment, consumer electronics, and precision analog systems. As part of the Semiconductors, Integrated Circuits – ICs, Audio ICs, Audio Amplifiers category, this IC delivers superior sound clarity, low noise, and excellent drive capability for high-fidelity audio applications.

Available now at www.xonelec.com, the NJM4580DD is an ideal choice for engineers seeking stable, clean, and powerful audio amplification.

Technical Specifications of NJM4580DD

• Manufacturer: Nisshinbo

• Part Number: NJM4580DD

• Type: Dual Audio Amplifiers

• Supply Voltage: ±4V to ±18V

• Slew Rate: 8 V/µs

• Gain Bandwidth Product: 15 MHz

• Input Noise Voltage: 8 nV/vHz

• Package: DIP-8

• Category: Semiconductors, Integrated Circuits – ICs, Audio ICs, Audio Amplifiers

Built for high-performance audio systems, this device ensures transparent sound reproduction and stable operation across various signal levels.

Key Features of NJM4580DD Audio Amplifiers

• Low noise and low distortion for high-quality audio output

• High output current ideal for headphone and audio load driving

• High slew rate for fast dynamic response

• Wide operating voltage range

• Excellent audio clarity and frequency response

These advantages place the NJM4580DD among the most reliable Audio ICs and Audio Amplifiers in high-fidelity sound applications within the Semiconductors family.

Applications of NJM4580DD

The NJM4580DD Audio Amplifiers by Nisshinbo are suitable for:

• Hi-Fi and studio-grade audio systems

• Headphone amplifiers

• Active audio filters

• Audio mixers and pre-amplifiers

• Musical instruments and audio processors

• Consumer electronics and portable audio devices

As part of the Integrated Circuits – ICs category, these Audio Amplifiers ensure stable, low-noise results in demanding audio environments.

Wiring and Connection Overview

The DIP-8 pin configuration includes:

• Non-inverting & inverting inputs

• Output pins for each channel

• V+ and V- supply pins

This straightforward layout allows seamless integration into audio boards and Audio ICs-based projects.

Use Case Scenario: Studio-Quality Headphone Amplifier

Scenario: A manufacturer required a clean, low-noise amplifier for studio headphones.
Problem: Existing ICs created distortion during high output peaks.
Solution: The NJM4580DD Audio Amplifiers by Nisshinbo offered the required high current drive and low noise performance.
Result: Distortion-free audio at all volume levels with improved sound depth and clarity.

This example highlights the importance of choosing high-quality Audio Amplifiers and Semiconductors in professional audio engineering.

Download Datasheet for NJM4580DD

For electrical characteristics, test circuits, and design guidelines:
Download the NJM4580DD Datasheet from XON Electronics.

Also Available from Other Manufacturers

XON Electronics also provides alternative Audio Amplifiers from:

• JRC

These substitutes provide excellent value across various Audio ICs and Semiconductors applications.

Why Buy from XON Electronics?

Shop at www.xonelec.com for:

• 100% genuine Nisshinbo components
• Fast delivery to USA, India, Australia, Europe & other regions
• Bulk and OEM order support
• Global sourcing for hard-to-find parts
• Safe and secure checkout

Get the NJM4580DD Audio Amplifiers by Nisshinbo for premium sound performance and reliable long-term operation.

FAQs – NJM4580DD Audio Amplifiers by Nisshinbo

Q1: What makes the NJM4580DD suitable for audio applications?
A: Its low noise, low distortion, and high output current.

Q2: What package does it use?
A: DIP-8.

Q3: Is it suitable for headphone amps?
A: Yes, due to strong drive capability.

Q4: What is its noise performance?
A: 8 nV/vHz.

Q5: Where can I buy it online?
A: At www.xonelec.com, shipping globally including USA, India, Australia, and Europe.

Conclusion

The NJM4580DD Audio Amplifiers by Nisshinbo deliver outstanding clarity, low noise, and powerful performance for audio equipment. As a premium device in the Semiconductors, Integrated Circuits – ICs, Audio ICs, Audio Amplifiers category, it is an excellent choice for Hi-Fi, professional, and industrial audio designs.

Order now at www.xonelec.com and power your next audio design with confidence.

NJM4580E-TE1 Operational Amplifiers – Op Amps by JRC – High-Performance Dual Amplifier for Audio & Precision Circuits

The Operational Amplifiers – Op Amps NJM4580E-TE1 by JRC deliver exceptional performance for audio processing, industrial instrumentation, and precision amplification tasks. As part of the Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps category, this device is renowned for its low noise, high slew rate, and stable output, making it ideal for demanding analog designs.

Now available at www.xonelec.com, the NJM4580E-TE1 is a versatile and reliable solution for high-quality audio and signal processing applications.

Technical Specifications of NJM4580E-TE1

• Manufacturer: JRC

• Part Number: NJM4580E-TE1

• Type: Dual Operational Amplifiers – Op Amps

• Supply Voltage Range: ±4V to ±18V

• Slew Rate: 8 V/µs

• Gain Bandwidth Product: 15 MHz

• Input Noise Voltage: 8 nV/vHz

• Output Drive: High-current output

• Package Type: SOP-8

• Category: Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps

Designed for superior signal clarity, the NJM4580E-TE1 delivers low distortion and wide bandwidth, making it ideal for precision and professional audio equipment.

Key Features of NJM4580E-TE1 Op Amps

• High slew rate for fast signal transitions

• Low noise and distortion for audio applications

• Wide operating voltage range

• High output current suitable for headphone drivers

• Compact SOP-8 package for easy PCB integration

These features make the NJM4580E-TE1 a top choice within Semiconductors and Amplifier ICs for superior analog performance.

Applications of NJM4580E-TE1

The NJM4580E-TE1 Operational Amplifiers – Op Amps by JRC are widely used in:

• Hi-Fi audio systems and headphone amplifiers

• Active filters and audio mixers

• Industrial instrumentation

• Precision signal processing circuits

• Consumer electronics

These Operational Amplifiers – Op Amps enhance accuracy, stability, and audio fidelity across a wide range of Integrated Circuits – ICs applications.

Wiring and Connection Overview

The standard dual-Op Amp configuration includes:

• IN+ / IN-: Non-inverting and inverting inputs

• OUT: Amplified output

• V+ / V-: Positive and negative supply pins

This simple wiring scheme ensures easy integration into Amplifier ICs and analog circuit designs.

Use Case Scenario: Professional Audio Preamp

Scenario: A manufacturer needed a low-noise Op Amp for a studio-grade microphone preamplifier.
Problem: Earlier amplifiers introduced noise and affected clarity.
Solution: The NJM4580E-TE1 Operational Amplifiers – Op Amps by JRC offered superior SNR and low distortion.
Result: Crystal-clear audio, improved dynamic range, and enhanced system performance.

This highlights the importance of high-precision Semiconductors in audio signal chains.

Download Datasheet for NJM4580E-TE1

For detailed specifications, performance graphs, and recommended circuits:
Download the NJM4580E-TE1 Datasheet from XON Electronics.

Also Available from Other Manufacturers

XON Electronics also offers alternatives to the NJM4580E-TE1 Operational Amplifiers – Op Amps, including top-quality devices from:

• Nisshinbo

These Operational Amplifiers – Op Amps provide similar performance for various Amplifier ICs applications.

Why Buy from XON Electronics?

Shop at www.xonelec.com to enjoy:

• 100% genuine JRC components
• Worldwide shipping – USA, India, Australia, Europe & more
• Bulk and OEM pricing
• Expert sourcing and technical assistance
• Safe and fast checkout

Choose the NJM4580E-TE1 Operational Amplifiers – Op Amps by JRC for dependable performance and high-precision amplification.

FAQs – NJM4580E-TE1 Operational Amplifiers – Op Amps

Q1: What is the main application of the NJM4580E-TE1?
A: Audio circuits, filters, signal conditioning, and instrumentation.

Q2: What is the gain bandwidth?
A: 15 MHz.

Q3: Does it support dual power supplies?
A: Yes, ±4V to ±18V.

Q4: Is it suitable for low-noise applications?
A: Yes, it features 8 nV/vHz noise performance.

Q5: Where can I buy it globally?
A: At www.xonelec.com, shipped worldwide including USA, India, Australia, and Europe.

Conclusion

The NJM4580E-TE1 Operational Amplifiers – Op Amps by JRC deliver exceptional performance for audio, instrumentation, and precision electronics. As a top-tier component within the Semiconductors, Integrated Circuits – ICs, Amplifier ICs, Operational Amplifiers – Op Amps category, it ensures stable, accurate, and noise-free amplification.

Buy online today from www.xonelec.com and experience unmatched quality and performance.

NJM7815FA Linear Voltage Regulators by Nisshinbo – Stable and Efficient 15V Power Solutions

The Linear Voltage Regulators NJM7815FA by Nisshinbo are high-performance Semiconductors designed to provide a precise +15V regulated output. Part of the Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators family, these components offer dependable voltage regulation, overload protection, and low noise operation—ideal for a variety of industrial and electronic control systems.

Available now at www.xonelec.com, the NJM7815FA ensures consistent voltage output for stable circuit performance and enhanced system reliability.

Technical Specifications of NJM7815FA

• Manufacturer: Nisshinbo

• Part Number: NJM7815FA

• Type: Linear Voltage Regulators

• Output Voltage: +15V DC

• Input Voltage Range: Up to 35V DC

• Output Current: 1A

• Dropout Voltage: 2V typical

• Package Type: TO-220F

• Operating Temperature Range: 0°C to +125°C

• Category: Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators

The NJM7815FA is widely used in power supply designs requiring a reliable +15V regulated output, with built-in thermal shutdown and short-circuit protection.

Key Features of NJM7815FA Linear Voltage Regulators

• Fixed +15V output voltage with high precision

• Built-in overload and short-circuit protection

• Excellent line and load regulation performance

• High thermal stability for continuous operation

• Low output noise for sensitive applications

As part of the Power Management ICs family, these Linear Voltage Regulators are trusted Semiconductors that ensure robust and efficient power control in any design.

Applications of NJM7815FA

The NJM7815FA Linear Voltage Regulators by Nisshinbo are suitable for:

• Industrial and automation power systems

• Communication and instrumentation devices

• Audio and video equipment power supplies

• Embedded and microcontroller-based systems

• Consumer electronics and test equipment

These Voltage Regulators & Voltage Controllers deliver reliable, noise-free voltage for precision electronics and control circuits.

Wiring and Connection Overview

The NJM7815FA follows a standard 3-pin configuration:

• Pin 1: Input voltage

• Pin 2: Ground (GND)

• Pin 3: Regulated output (+15V)

This simple layout makes the NJM7815FA Linear Voltage Regulators easy to integrate into Semiconductors and Integrated Circuits - ICs projects requiring stable +15V supply.

Use Case Scenario: Industrial Control Power Regulation

Scenario: An automation system required stable +15V output for control sensors.
Problem: Voltage variations caused unreliable sensor readings.
Solution: The NJM7815FA Linear Voltage Regulators by Nisshinbo maintained consistent voltage levels.
Result: Improved reliability, enhanced accuracy, and reduced downtime.

This highlights the essential role of Voltage Regulators & Voltage Controllers in maintaining precision and consistency in Power Management ICs.

Download Datasheet for NJM7815FA

For full specifications, circuit schematics, and detailed parameters:
Download the NJM7815FA Datasheet from XON Electronics.

Also Available from Other Manufacturers

If you’re searching for alternatives to the NJM7815FA Linear Voltage Regulators, XON Electronics also offers compatible options from:

• JRC

These Integrated Circuits - ICs offer reliable performance for Power Management ICs and Linear Voltage Regulators across a wide range of electronic applications.

Why Buy from XON Electronics?

Buy confidently at www.xonelec.com and enjoy:

• 100% genuine Nisshinbo products
• Global delivery to USA, India, Australia, Europe & more
• Bulk order discounts for OEMs and distributors
• Expert component sourcing and support
• Secure online transactions

Get the NJM7815FA Linear Voltage Regulators by Nisshinbo from XON Electronics for dependable and efficient Semiconductors trusted worldwide.

FAQs – NJM7815FA Linear Voltage Regulators by Nisshinbo

Q1: What is the output voltage of NJM7815FA?
A: It provides a regulated +15V DC output.

Q2: What is the maximum output current?
A: The NJM7815FA supports up to 1A continuous current.

Q3: What protections are built-in?
A: Short-circuit and thermal overload protection.

Q4: Is it suitable for industrial use?
A: Yes, it’s designed for industrial and automation systems.

Q5: Where can I buy it globally?
A: Available at www.xonelec.com with shipping to USA, India, Australia, Europe, and other countries.

Conclusion

The NJM7815FA Linear Voltage Regulators by Nisshinbo deliver stable, efficient, and reliable +15V power for a variety of electronic systems. As part of the Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators family, they ensure consistent operation and robust protection for sensitive devices.

Buy online today from www.xonelec.com and experience trusted performance with NJM7815FA Linear Voltage Regulators by Nisshinbo.

NJM78M05FA Linear Voltage Regulators by Nisshinbo – Stable and Efficient Power Regulation Solutions

The Linear Voltage Regulators NJM78M05FA by Nisshinbo are reliable and high-performance Semiconductors designed to deliver precise 5V regulated output for various electronic systems. Belonging to the Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators family, they ensure steady voltage levels and protect devices from voltage fluctuations and instability.

Now available at www.xonelec.com, the NJM78M05FA is an industry-standard regulator ideal for power supplies, embedded systems, and industrial control applications.

Technical Specifications of NJM78M05FA

• Manufacturer: Nisshinbo

• Part Number: NJM78M05FA

• Type: Linear Voltage Regulators

• Output Voltage: +5V DC

• Input Voltage Range: Up to 35V DC

• Output Current: 500mA

• Dropout Voltage: 2V typical

• Package Type: TO-220F

• Operating Temperature Range: 0°C to +125°C

• Category: Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators

The NJM78M05FA provides accurate voltage regulation with built-in thermal and short-circuit protection, ensuring safe operation in all types of electronic circuits.

Key Features of NJM78M05FA Linear Voltage Regulators

• Fixed 5V regulated output with high accuracy

• Thermal overload and short-circuit protection

• Low noise and ripple output

• High power efficiency and stability

• Easy to integrate into Power Management ICs and control boards

These Linear Voltage Regulators are part of Nisshinbo’s reliable Semiconductors line, offering long-term durability and consistent performance.

Applications of NJM78M05FA

The NJM78M05FA Linear Voltage Regulators by Nisshinbo are ideal for:

• Embedded systems and microcontroller power supplies

• Industrial automation and process control circuits

• Consumer electronics and home appliances

• Communication and instrumentation devices

• Battery-powered and DC systems

These Voltage Regulators & Voltage Controllers provide superior Power Management and stable operation in various electronic setups.

Wiring and Connection Overview

The NJM78M05FA follows the standard three-pin configuration:

• Pin 1: Input voltage

• Pin 2: Ground (GND)

• Pin 3: Regulated output (5V)

This simple design allows easy integration into Semiconductors and Integrated Circuits - ICs projects that require precise Linear Voltage Regulators.

Use Case Scenario: Embedded Control Power Supply

Scenario: An embedded system required a constant 5V supply for stable MCU performance.
Problem: Input fluctuations caused resets and malfunction in the control circuit.
Solution: The NJM78M05FA Linear Voltage Regulators by Nisshinbo provided a stable and regulated 5V output.
Result: Improved reliability, reduced noise, and longer component life.

This showcases the effectiveness of Voltage Regulators & Voltage Controllers in ensuring stable Power Management ICs operation.

Download Datasheet for NJM78M05FA

For complete specifications, circuit diagrams, and thermal data:
Download the NJM78M05FA Datasheet from XON Electronics.

Also Available from Other Manufacturers

If you’re looking for alternatives to the NJM78M05FA Linear Voltage Regulators, XON Electronics also offers compatible solutions from:

• JRC

These Integrated Circuits - ICs provide similar functionality and high reliability in Power Management ICs and voltage regulation applications.

Why Buy from XON Electronics?

Choose www.xonelec.com for genuine components and reliable global supply:

• 100% original Nisshinbo parts
• Worldwide shipping – USA, India, Australia, Europe & more
• Bulk discounts for distributors and OEMs
• Expert technical assistance and sourcing support
• Secure online purchasing platform

Purchase the NJM78M05FA Linear Voltage Regulators by Nisshinbo from XON Electronics for trusted Semiconductors used worldwide.

FAQs – NJM78M05FA Linear Voltage Regulators by Nisshinbo

Q1: What is the output voltage of NJM78M05FA?
A: It provides a fixed +5V DC regulated output.

Q2: What is the maximum output current?
A: Up to 500mA continuous current.

Q3: What protections are included?
A: Built-in short-circuit and thermal overload protection.

Q4: What package type is used?
A: TO-220F, ideal for compact PCB mounting.

Q5: Where can I buy it globally?
A: Available at www.xonelec.com with fast delivery to USA, India, Australia, Europe, and other countries.

Conclusion

The NJM78M05FA Linear Voltage Regulators by Nisshinbo provide reliable, efficient, and stable voltage output for modern electronics. As part of the Semiconductors, Integrated Circuits - ICs, Power Management ICs, Voltage Regulators & Voltage Controllers, Linear Voltage Regulators family, they are essential for circuit stability and safety.

Buy online today from www.xonelec.com and ensure your designs run efficiently with the NJM78M05FA Linear Voltage Regulators by Nisshinbo.

NJW1302G Bipolar Transistors - BJT by ON Semiconductor – High-Performance Solutions for Power Amplification and Switching

The Bipolar Transistors - BJT NJW1302G by ON Semiconductor are premium PNP Semiconductors designed for high-power amplification and efficient switching applications. As a key member of the Discrete Semiconductors, Transistors, Bipolar Transistors - BJT category, these devices deliver excellent linearity, thermal stability, and low distortion—ideal for professional audio amplifiers and power control systems.

Now available at www.xonelec.com, the NJW1302G is engineered to meet demanding performance requirements in both commercial and industrial applications.

Technical Specifications of NJW1302G

• Manufacturer: ON Semiconductor

• Part Number: NJW1302G

• Type: PNP Bipolar Transistors - BJT

• Collector-Emitter Voltage (Vce): -260V

• Collector Current (Ic): -15A

• Power Dissipation (Pd): 200W

• DC Current Gain (hFE): 50–160

• Transition Frequency (fT): 30MHz

• Package Type: TO-3P

• Operating Temperature Range: -55°C to +150°C

• Category: Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT

The NJW1302G pairs perfectly with the NJW3281G NPN type, providing balanced push-pull configurations in high-fidelity and power amplifier circuits.

Key Features of NJW1302G Bipolar Transistors

• High voltage capability up to -260V

• 200W power dissipation for heavy-duty applications

• Low distortion and high transition frequency

• Excellent thermal stability and gain consistency

• Optimized for linear and switching operations

These Transistors, Bipolar Transistors - BJT ensure consistent amplification and reliability, making them an essential component in robust Semiconductors designs.

Applications of NJW1302G

The NJW1302G Bipolar Transistors - BJT by ON Semiconductor are widely used in:

• High-power audio amplifier circuits

• Motor drivers and power control units

• Industrial inverter systems

• Audio output stages

• Communication and RF power circuits

Engineers rely on these Discrete Semiconductors for exceptional current handling and smooth signal response in precision applications.

Wiring and Connection Overview

The NJW1302G features a standard TO-3P pin configuration:

• Pin 1: Base (B) – Control terminal

• Pin 2: Collector (C) – Connected to load or output

• Pin 3: Emitter (E) – Common terminal

The TO-3P package ensures efficient heat dissipation, vital for high-power Transistors, Bipolar Transistors - BJT used in Semiconductors applications.

Use Case Scenario: High-Fidelity Audio Power Amplifiers

Scenario: A premium audio manufacturer needed a complementary PNP transistor to pair with the NJW3281G for a push-pull amplifier.
Problem: Previous transistors produced thermal drift and distortion at high loads.
Solution: The NJW1302G Bipolar Transistors - BJT by ON Semiconductor provided perfect linearity and low crossover distortion.
Result: Enhanced sound clarity, improved thermal control, and reliable high-power output.

This showcases why Semiconductors like the NJW1302G are preferred for professional-grade audio and power systems.

Download Datasheet for NJW1302G

For complete electrical specifications, performance data, and package dimensions:
Download the NJW1302G Datasheet from XON Electronics.

Also Available from Other Manufacturers

If you’re searching for alternatives to the NJW1302G Bipolar Transistors - BJT, XON Electronics also offers compatible Transistors from:

• SPTECH

These Discrete Semiconductors provide similar electrical characteristics, making them suitable substitutes for Bipolar Transistors - BJT circuits.

Why Buy from XON Electronics?

Shop confidently at www.xonelec.com for all your electronic component needs:

• 100% authentic ON Semiconductor products
• Global delivery – USA, India, Australia, Europe & more
• Competitive bulk pricing for distributors and OEMs
• Expert sourcing and technical support
• Secure online transactions

Choose the NJW1302G Bipolar Transistors - BJT by ON Semiconductor for precision, power, and performance in your Semiconductors designs.

FAQs – NJW1302G Bipolar Transistors - BJT by ON Semiconductor

Q1: What is the collector-emitter voltage rating of NJW1302G?
A: It supports up to -260V.

Q2: What is its power dissipation capability?
A: It can handle up to 200W.

Q3: What type of transistor is it?
A: It’s a PNP Bipolar Transistor - BJT.

Q4: Is it suitable for high-power amplifier circuits?
A: Yes, it’s ideal for high-fidelity and industrial applications.

Q5: Where can I buy it globally?
A: Available at www.xonelec.com with shipping to USA, India, Australia, Europe, and other countries.

Conclusion

The NJW1302G Bipolar Transistors - BJT by ON Semiconductor provide outstanding performance, durability, and efficiency for modern amplifier and switching applications. As part of the Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT family, they ensure reliable and distortion-free operation in high-demand systems.

Buy online today from www.xonelec.com and experience the superior quality of NJW1302G Bipolar Transistors by ON Semiconductor.

NJW3281G Bipolar Transistors - BJT by SPTECH – High-Power and Reliable Performance for Amplification and Switching

The Bipolar Transistors - BJT NJW3281G by SPTECH are high-performance NPN Semiconductors designed for efficient power amplification and high-current switching. As part of the Discrete Semiconductors, Transistors, Bipolar Transistors - BJT family, these devices deliver superior gain linearity, thermal stability, and low distortion, making them ideal for high-fidelity audio systems and industrial applications.

Available now at www.xonelec.com, the NJW3281G provides dependable performance and durability across various electronic circuits requiring precision amplification and switching.

Technical Specifications of NJW3281G

• Manufacturer: SPTECH

• Part Number: NJW3281G

• Type: NPN Bipolar Transistors - BJT

• Collector-Emitter Voltage (Vce): 260V

• Collector Current (Ic): 15A

• Power Dissipation (Pd): 200W

• DC Current Gain (hFE): 50–160

• Transition Frequency (fT): 30MHz

• Package Type: TO-3P

• Operating Temperature Range: -55°C to +150°C

• Category: Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT

The NJW3281G offers excellent electrical performance, ensuring smooth operation and enhanced reliability in high-power designs.

Key Features of NJW3281G Bipolar Transistors

• High power dissipation up to 200W

• Excellent linear gain for high-quality amplification

• Robust NPN structure for durability and stability

• Low distortion and high transition frequency

• Ideal for both linear and switching applications

These Transistors, Bipolar Transistors - BJT ensure precise amplification and control, making them a key component in professional-grade Semiconductors.

Applications of NJW3281G

The NJW3281G Bipolar Transistors - BJT by SPTECH are used in:

• High-fidelity (Hi-Fi) and audio power amplifiers

• Motor drivers and power control units

• Industrial power supplies and converters

• Inverter and amplifier output stages

• Communication and broadcasting equipment

These Discrete Semiconductors are ideal for circuits requiring high voltage, current, and power handling capacity.

Wiring and Connection Overview

For the NJW3281G, the pin configuration is as follows:

• Pin 1: Base (B) – Input signal control

• Pin 2: Collector (C) – Connected to load or power output

• Pin 3: Emitter (E) – Common terminal to ground

The TO-3P package of these Transistors, Bipolar Transistors - BJT ensures efficient heat dissipation, critical for high-power Semiconductors.

Use Case Scenario: High-Fidelity Audio Amplifier Design

Scenario: A professional audio system required high-output Transistors capable of handling large current loads without distortion.
Problem: Standard BJTs introduced nonlinear distortion at high power levels.
Solution: The NJW3281G Bipolar Transistors - BJT by SPTECH delivered clean, distortion-free sound reproduction and excellent linearity.
Result: Enhanced audio clarity and thermal stability in continuous high-power operation.

This showcases the exceptional capability of Semiconductors like the NJW3281G in premium amplification and switching systems.

Download Datasheet for NJW3281G

For detailed specifications, electrical characteristics, and package drawings:
Download the NJW3281G Datasheet from XON Electronics.

Also Available from Other Manufacturers

For engineers seeking compatible Bipolar Transistors - BJT, XON Electronics also provides similar Transistors from:

• ON Semiconductor

These high-quality Discrete Semiconductors offer equivalent performance and are suitable for diverse Semiconductors applications.

Why Buy from XON Electronics?

Buy from www.xonelec.com and enjoy:

• Genuine SPTECH components
• Worldwide shipping to USA, India, Australia, Europe & more
• Bulk pricing for OEMs and distributors
• Professional sourcing and technical assistance
• Safe and easy online purchase process

Choose NJW3281G Bipolar Transistors - BJT by SPTECH from XON Electronics for high-performance Semiconductors trusted worldwide.

FAQs – NJW3281G Bipolar Transistors - BJT by SPTECH

Q1: What is the maximum collector-emitter voltage of NJW3281G?
A: It supports up to 260V.

Q2: What is its power dissipation capability?
A: The transistor can handle up to 200W of power.

Q3: What type of transistor is it?
A: It’s an NPN Bipolar Transistor - BJT.

Q4: What applications is it best suited for?
A: Power amplifiers, inverters, and industrial control systems.

Q5: Where can I buy it globally?
A: Available at www.xonelec.com with shipping to USA, India, Australia, Europe, and other countries.

Conclusion

The NJW3281G Bipolar Transistors - BJT by SPTECH combine power, reliability, and efficiency for demanding electronic applications. As part of the Semiconductors, Discrete Semiconductors, Transistors, Bipolar Transistors - BJT category, they provide precise amplification, superior heat handling, and consistent performance for audio and industrial circuits.

Buy online today from www.xonelec.com and power your designs with the high-efficiency NJW3281G Bipolar Transistors by SPTECH.

NME0505SC Isolated DC/DC Converters by Murata – Compact and Reliable Power Conversion

The Isolated DC/DC Converters NME0505SC by Murata are designed for high-performance power management in compact electronic systems. Belonging to the Power, DC/DC Converters, Isolated DC/DC Converters family, these modules provide efficient voltage regulation and strong electrical isolation, ensuring reliable operation in industrial, communication, and instrumentation environments.

Now available at www.xonelec.com, the NME0505SC offers exceptional efficiency and compact design, making it ideal for low-power distributed Power applications.

Technical Specifications of NME0505SC

• Manufacturer: Murata

• Part Number: NME0505SC

• Type: Isolated DC/DC Converters

• Input Voltage: 5V DC

• Output Voltage: ±5V DC

• Output Power: 1W

• Efficiency: Up to 82%

• Isolation Voltage: 1kV DC

• Package Type: SIP (Single Inline Package)

• Operating Temperature Range: -40°C to +85°C

• Category: Power, DC/DC Converters, Isolated DC/DC Converters

The NME0505SC delivers high isolation, low noise, and excellent voltage stability, making it a reliable choice for high-performance Power systems.

Key Features of NME0505SC Isolated DC/DC Converters

• High efficiency of up to 82% for reduced power loss

• 1kV DC isolation between input and output for safety

• Compact SIP package design

• Low ripple and noise for sensitive circuits

• RoHS compliant and encapsulated for durability

These DC/DC Converters ensure safe and efficient Power transfer across various system architectures.

Applications of NME0505SC

The NME0505SC Isolated DC/DC Converters by Murata are widely used in:

• Industrial automation and control systems

• Data communication and networking devices

• Test and measurement instruments

• Battery-operated and portable equipment

• Medical and precision electronic devices

These Isolated DC/DC Converters offer clean, regulated Power output for critical electronic systems that require stable and noise-free performance.

Wiring and Connection Overview

The NME0505SC features a simple connection design:

• Input Pins: Connect to 5V DC input

• Output Pins: Provide isolated ±5V DC output

• Ground: Common for input reference

Its SIP design simplifies integration in Power, DC/DC Converters, Isolated DC/DC Converters applications, ensuring stable energy transfer and compact layout design.

Use Case Scenario: Noise-Free Signal Powering

Scenario: A data acquisition system needed isolated Power for its analog sensors.
Problem: Direct power lines introduced interference in measurements.
Solution: The NME0505SC Isolated DC/DC Converters by Murata provided clean and isolated Power to sensitive analog circuits.
Result: Enhanced signal accuracy and improved system reliability.

This example shows how DC/DC Converters play a crucial role in maintaining clean and isolated Power supply in high-precision electronics.

Download Datasheet for NME0505SC

For complete specifications, efficiency curves, and mechanical details:
Download the NME0505SC Datasheet from XON Electronics.

Also Available from Other Manufacturers

If you’re looking for alternatives to the NME0505SC Isolated DC/DC Converters, XON Electronics also offers comparable Power solutions from:

• YLPTEC

These DC/DC Converters ensure similar performance and reliability for a wide range of Isolated DC/DC Converters applications.

Why Buy from XON Electronics?

Buy from www.xonelec.com and enjoy:

• 100% genuine Murata components
• Global shipping – USA, India, Australia, Europe & more
• Competitive pricing for bulk and OEM orders
• Expert sourcing and technical assistance
• Secure and fast online checkout

Purchase the NME0505SC Isolated DC/DC Converters by Murata from XON Electronics for reliable and efficient Power conversion in your next design.

FAQs – NME0505SC Isolated DC/DC Converters by Murata

Q1: What is the input voltage of the NME0505SC?
A: It operates with a 5V DC input.

Q2: What is its output voltage?
A: It provides dual isolated ±5V DC outputs.

Q3: What is the isolation voltage rating?
A: The module provides 1kV DC isolation between input and output.

Q4: Is it suitable for industrial applications?
A: Yes, it’s ideal for control, communication, and test systems.

Q5: Where can I buy it globally?
A: Available at www.xonelec.com with worldwide delivery to USA, India, Australia, Europe, and other countries.

Conclusion

The NME0505SC Isolated DC/DC Converters by Murata provide superior electrical isolation, compact design, and reliable performance. As part of the Power, DC/DC Converters, Isolated DC/DC Converters series, they offer efficient and stable Power solutions for industrial and communication systems.

Buy online today from www.xonelec.com and experience trusted quality and performance with NME0505SC Isolated DC/DC Converters by Murata.

173111-0204 D-Sub Backshells by Molex

Introduction

The D-Sub Backshells 173111-0204 by Molex are designed for robust and reliable connectivity in demanding environments. As part of the Connectors, D-Sub Connectors, and D-Sub Backshells by Molex, this product ensures excellent protection, strain relief, and electromagnetic interference (EMI) shielding for your D-Sub assemblies. Molex, known for innovation and durability, offers high-quality interconnect solutions trusted across multiple industries.

Technical Specifications

• Manufacturer: Molex

• Part Number: 173111-0204

• Connector Type: D-Sub Backshell

• Material: Zinc Die-Cast with Nickel Plating

• Cable Entry: Straight

• Mounting Type: Screw Lock

• Compatibility: Standard D-Sub Connectors

Key Features

1. High Durability: The 173111-0204 D-Sub Backshells by Molex provide long-lasting protection for D-Sub connectors in harsh environments.

2. Superior EMI Shielding: Reduces electromagnetic interference for stable signal transmission.

3. Strong Cable Strain Relief: Ensures secure and reliable cable retention.

4. Easy Installation: Compatible with standard Connectors, D-Sub Connectors, and D-Sub Backshells by Molex.

5. Universal Fit: Ideal for both commercial and industrial connectivity applications.

Applications

The 173111-0204 D-Sub Backshells by Molex are widely used in:

• Industrial automation systems

• Telecommunications and networking devices

• Control panels and machinery

• Instrumentation and test equipment

• Aerospace and defense applications

Performance Overview

As a core product in Connectors, D-Sub Connectors, and D-Sub Backshells by Molex, this backshell is engineered to protect signal integrity and ensure long-term reliability. Its sturdy metal design offers excellent resistance to mechanical stress and external interference, making it a preferred choice for engineers worldwide.

Use Case Example

In manufacturing environments across USA, India, Australia, and Europe, engineers use the 173111-0204 D-Sub Backshells by Molex to enhance cable durability and minimize connection failures. This ensures consistent signal quality in mission-critical systems.

Datasheet Download

Download the official datasheet for 173111-0204 D-Sub Backshells by Molex  for complete electrical and mechanical specifications.

Why Buy from Xonelec

At Xonelec, we provide genuine Connectors, D-Sub Connectors, and D-Sub Backshells by Molex at competitive prices. We offer global shipping to USA, India, Australia, Europe, and other countries, ensuring fast delivery and reliable sourcing for all your electronic component needs.

Conclusion

The 173111-0204 D-Sub Backshells by Molex are a high-quality choice for professionals seeking dependable connector protection and superior EMI performance. As part of Connectors, D-Sub Connectors, and D-Sub Backshells by Molex, this component is ideal for industries requiring reliability, durability, and precision.

FAQs

Q1: What is the main use of the 173111-0204 D-Sub Backshells by Molex?
A1: It provides cable protection, strain relief, and EMI shielding for D-Sub connectors.

Q2: Are these D-Sub Backshells compatible with all D-Sub connectors?
A2: Yes, the 173111-0204 D-Sub Backshells by Molex are designed for standard D-Sub connector compatibility.

Q3: Where are these backshells used?
A3: Commonly used in industrial automation, control systems, and communication equipment.

Q4: Where can I purchase 173111-0204 D-Sub Backshells by Molex?
A4: You can buy authentic D-Sub Backshells by Molex from Xonelec.com, with worldwide delivery including USA, India, Australia, and Europe.