U310 JFET by InterFET – High-Performance Junction Field Effect Transistor

The JFET U310 by InterFET is a high-gain, low-noise junction field effect transistor designed for precision signal amplification and switching applications. Known for its exceptional input impedance and low leakage characteristics, the U310 is ideal for RF amplifiers, mixers, and sensitive analog circuitry.

As part of the semiconductors, discrete semiconductors, transistors, JFET category, this component provides reliable performance for engineers who demand stability and efficiency in their designs.

Technical Specifications of U310 JFET

• Manufacturer: InterFET

• Part Number: U310

• Category: Semiconductors, Discrete Semiconductors, Transistors, JFET

• Type: N-Channel JFET

• Drain-Source Voltage (Vds): High tolerance for reliable performance

• Gate-Source Cutoff Voltage (Vgs(off)): Optimized for low-noise operation

• Package Type: TO-92 or similar

• Applications: RF amplifiers, oscillators, audio preamps, precision measurement circuits

This JFET transistor ensures excellent signal fidelity across a wide range of applications.

Key Features of U310 JFET

• High input impedance for minimal loading on preceding stages

• Low noise performance for high signal clarity

• Wide operating voltage range

• Compact, through-hole package for easy PCB integration

• Reliable switching and amplification capabilities

The U310 JFET offers engineers a dependable solution for high-performance analog and RF applications.

Applications of U310 JFET

• RF and IF Amplifiers

• Audio Pre-Amplifiers

• Oscillator Circuits

• Sensor Signal Conditioning

• Precision Measurement Equipment

As a JFET transistor in the semiconductors family, it is well-suited for critical, noise-sensitive designs.

Wiring and Connection Overview

• Drain (D): Connect to load or circuit output

• Source (S): Connect to ground or bias reference

• Gate (G): Input control for signal or bias voltage

This simple three-terminal configuration makes it easy to integrate the U310 into existing circuits.

Use Case Scenario: RF Amplifier Upgrade

Problem: An RF designer needed a low-noise transistor to improve signal clarity in a receiver.

Solution: The U310 JFET provided superior noise performance and stable gain.

Result: Enhanced receiver sensitivity and reduced signal distortion.

Download Datasheet for U310 JFET

[Download the U310 JFET Datasheet from Xon Electronics]

Also Available from Other Manufacturers

• Vishay

Why Buy from Xon Electronics?

• 100% Genuine InterFET Components
• Worldwide Shipping – USA, India, Australia, Europe & more
• Competitive Prices with Bulk Discounts
• Technical Support & Datasheet Access
• Secure Ordering and Fast Delivery

FAQs – U310 JFET

Q1. What is the primary application of the U310 JFET?
It is ideal for low-noise RF and analog signal amplification.

Q2. Is it a through-hole or surface-mount device?
The U310 is typically available in a through-hole package.

Q3. Can it be used in oscillator designs?
Yes, it is well-suited for oscillator and mixer circuits.

Q4. Does it have a high input impedance?
Yes, it offers extremely high input impedance.

Q5. Do you ship worldwide?
Yes, we ship to USA, India, Australia, Europe, and many other countries.

Conclusion

The U310 JFET by InterFET delivers exceptional low-noise performance, high input impedance, and stable operation, making it perfect for sensitive RF, audio, and instrumentation designs. As part of the semiconductors, discrete semiconductors, transistors, JFET category, it is an essential choice for engineers seeking reliability and precision.

Order now from Xon Electronics for fast delivery to USA, India, Australia, Europe, and beyond.

TYS4018101M-10 Fixed Inductors by Laird Connectivity – High-Performance Magnetic Components

The Fixed Inductors TYS4018101M-10 by Laird Connectivity are designed to deliver exceptional performance in filtering, energy storage, and noise suppression applications. Built with precision and reliability in mind, these passive components ensure stable inductance values and consistent operation in various electronic circuits.

Part of the inductors, chokes & coils category, these fixed inductors are an excellent choice for engineers and designers seeking dependable magnetic components for both commercial and industrial applications.

Technical Specifications of TYS4018101M-10

• Manufacturer: Laird Connectivity

• Part Number: TYS4018101M-10

• Category: Passive Components, Inductors, Chokes & Coils, Fixed Inductors

• Inductance Value: 100 µH

• Tolerance: ±20%

• DC Resistance (DCR): Low for high efficiency

• Current Rating: Suitable for power and signal applications

• Mounting Type: Surface mount

• Applications: Power supplies, DC-DC converters, filtering

The TYS4018101M-10 Fixed Inductors offer high reliability, making them suitable for demanding designs.

Key Features of TYS4018101M-10 Fixed Inductors

• High inductance stability over varying conditions

• Low DCR for improved efficiency

• Compact surface-mount design

• Excellent filtering performance in power and signal circuits

• Rugged construction for long-term durability

These fixed inductors deliver consistent results, supporting high-performance designs in multiple industries.

Applications of TYS4018101M-10

• Power Supply Filtering

• DC-DC Converter Circuits

• EMI/RFI Noise Suppression

• Signal Conditioning

• Industrial and Consumer Electronics

This passive component is a top performer in inductors, chokes & coils, ensuring stable and reliable operation.

Wiring and Connection Overview

• Compact surface-mount package for automated PCB assembly

• Designed for optimal solderability

• Ensures minimal loss in high-frequency applications

• Easy integration into compact designs

Use Case Scenario: DC-DC Converter Optimization

Problem: A designer required a small, efficient inductor for a compact DC-DC converter.

Solution: The TYS4018101M-10 Fixed Inductors provided the necessary inductance and current handling in a compact size.

Result: Improved circuit efficiency and reduced EMI levels.

Download Datasheet for TYS4018101M-10 Fixed Inductors

[Download the TYS4018101M-10 Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

• 100% Genuine Laird Connectivity Components
• Worldwide Shipping – USA, India, Australia, Europe & more
• Competitive Prices & Bulk Discounts
• Access to Datasheets and Technical Support
• Secure and Quick Delivery

FAQs – TYS4018101M-10 Fixed Inductors

Q1. What is the inductance value?
The inductor has a 100 µH inductance.

Q2. Is it surface-mount or through-hole?
It comes in a surface-mount package.

Q3. Can it be used for power filtering?
Yes, it is ideal for power supply and DC-DC converter applications.

Q4. Does it meet EMI suppression requirements?
Yes, it provides excellent EMI/RFI noise suppression.

Q5. Do you ship globally?
Yes, to USA, India, Australia, Europe, and other countries.

Conclusion

The TYS4018101M-10 Fixed Inductors by Laird Connectivity combine high performance, reliability, and efficiency in a compact design. As part of the passive components range, specifically inductors, chokes & coils, these fixed inductors are a must-have for engineers seeking superior magnetic solutions.

Order today from Xon Electronics for fast delivery to USA, India, Australia, Europe, and more.

TTL-232R-3V3-WE USB Connectors by FTDI – Reliable Connectivity Solutions

The USB Connectors TTL-232R-3V3-WE by FTDI offer an efficient and easy solution for connecting USB to TTL-level serial UART interfaces. Designed for seamless integration into embedded systems, these connectors provide high-quality data communication, reliability, and ease of use for engineers, technicians, and developers.

As part of the connectors family, specifically USB connectors, the TTL-232R-3V3-WE simplifies USB-to-serial conversion without the need for additional drivers in most operating systems.

Technical Specifications of TTL-232R-3V3-WE

• Manufacturer: FTDI

• Part Number: TTL-232R-3V3-WE

• Category: Connectors, USB Connectors

• Interface Type: USB to TTL-level UART serial

• Operating Voltage: 3.3V TTL logic

• Cable Length: 1.8 meters

• Connector Type: USB Type-A plug to bare wire ends

• Compliance: RoHS-compliant

The TTL-232R-3V3-WE USB Connectors are ideal for embedded systems and development projects that require direct USB-to-serial communication.

Key Features of TTL-232R-3V3-WE USB Connectors

• Direct USB to TTL-level serial conversion

• High reliability and robust performance

• Plug-and-play functionality with most OS platforms

• Bare wire termination for flexible connection options

• Compact and durable cable design

These USB connectors offer developers a simple, effective way to add serial communication to a wide range of applications.

Applications of TTL-232R-3V3-WE

• Embedded System Development

• Microcontroller Communication

• Prototyping and Testing

• Field Data Logging

• Industrial Equipment Interface

Its combination of flexibility and reliability makes it a preferred choice in connectors for serial data communication projects.

Wiring and Connection Overview

• USB Type-A plug connects to the host device

• Bare wire ends for TTL-level UART signals (TX, RX, GND, etc.)

• 3.3V logic level for compatibility with low-voltage systems

• Easy integration into custom circuits and development boards

Use Case Scenario: Embedded System Debugging

Problem: An engineer needed a quick way to communicate with a microcontroller for debugging purposes.

Solution: The TTL-232R-3V3-WE USB Connectors provided a direct USB to UART connection at 3.3V levels without requiring extra adapters.

Result: Reduced setup time and improved debugging efficiency.

Download Datasheet for TTL-232R-3V3-WE USB Connectors

[Download the TTL-232R-3V3-WE Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

• 100% Genuine FTDI Components
• Global Shipping – USA, India, Australia, Europe & more
• Competitive Pricing & Bulk Discounts
• Instant Datasheet Access
• Secure and Fast Delivery

FAQs – TTL-232R-3V3-WE USB Connectors

Q1. What is the voltage level supported?
It operates at 3.3V TTL logic levels.

Q2. Is it compatible with all operating systems?
Yes, it supports most OS platforms with plug-and-play functionality.

Q3. Can it be used for microcontroller programming?
Yes, it’s ideal for microcontroller communication and debugging.

Q4. What type of connector does it have?
USB Type-A plug to bare wire ends.

Q5. Do you offer worldwide shipping?
Yes, including USA, India, Australia, Europe, and more.

Conclusion

The TTL-232R-3V3-WE USB Connectors by FTDI deliver a dependable, easy-to-use solution for USB-to-serial communication. Ideal for embedded projects, development work, and industrial systems, these USB connectors offer reliability and convenience for professional use.

Order now from Xon Electronics for fast global delivery to USA, India, Australia, Europe, and beyond.

TPP2-C1 Environmental Test Equipment by Beha-Amprobe – Accurate Testing Solutions

The Environmental Test Equipment TPP2-C1 by Beha-Amprobe offers professionals a reliable and accurate solution for measuring environmental parameters. Designed for industrial, laboratory, and field use, this instrument ensures precise data collection, durability, and ease of use.

As part of the test & measurement category, this environmental test equipment helps engineers, technicians, and researchers monitor temperature, pressure, and other key environmental factors with confidence.

Technical Specifications of TPP2-C1

• Manufacturer: Beha-Amprobe

• Part Number: TPP2-C1

• Category: Test & Measurement, Environmental Test Equipment

• Function: Measures and monitors environmental conditions

• Measurement Capabilities: Temperature, pressure, and related environmental parameters

• Design: Portable and durable for field applications

• Display: High-visibility LCD screen

• Compliance: Meets industry standards for environmental measurement

The TPP2-C1 Environmental Test Equipment is built for professionals who demand accuracy and reliability in challenging environments.

Key Features of TPP2-C1 Environmental Test Equipment

• Accurate measurements for temperature and pressure

• Durable and portable design for field and lab use

• High-visibility display for easy data reading

• Reliable performance in industrial and environmental testing

• User-friendly interface for quick operation

This environmental test equipment delivers dependable results, making it a trusted tool in professional test & measurement applications.

Applications of TPP2-C1

• Industrial Maintenance

• Laboratory Research

• HVAC System Testing

• Environmental Monitoring

• Quality Control Processes

Its adaptability makes the TPP2-C1 ideal for use in diverse sectors where accurate test & measurement is critical.

Wiring and Connection Overview

• Designed for direct connection to test points

• Provides stable readings without signal interference

• Battery-powered for portability

• Easy setup with intuitive controls

Use Case Scenario: HVAC System Analysis

Problem: An HVAC technician needed a portable, precise tool for evaluating system efficiency.

Solution: The TPP2-C1 Environmental Test Equipment delivered accurate temperature and pressure data in real time.

Result: Improved system diagnosis, reduced downtime, and enhanced client satisfaction.

Download Datasheet for TPP2-C1 Environmental Test Equipment

[Download the TPP2-C1 Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

• 100% Genuine Beha-Amprobe Equipment
• Global Shipping – USA, India, Australia, Europe & more
• Competitive Prices & Bulk Discounts
• Instant Datasheet Access
• Secure Ordering Process

FAQs – TPP2-C1 Environmental Test Equipment

Q1. What does the TPP2-C1 measure?
It measures environmental parameters such as temperature and pressure.

Q2. Is it portable?
Yes, it’s lightweight and designed for field use.

Q3. Can it be used for HVAC systems?
Absolutely, it’s perfect for HVAC testing and diagnostics.

Q4. Is it suitable for industrial applications?
Yes, it’s rugged enough for demanding environments.

Q5. Do you ship internationally?
Yes, we ship to USA, India, Australia, Europe, and more.

Conclusion

The TPP2-C1 Environmental Test Equipment by Beha-Amprobe is a versatile, durable, and precise tool for professionals across industries. Whether for test & measurement in the lab, field, or factory, it delivers reliable performance and ease of use.

Order today from Xon Electronics for fast delivery to USA, India, Australia, Europe, and beyond.

TPD2E009DBZR ESD Suppressors / TVS Diodes by TECH PUBLIC – Superior Circuit Protection

The ESD Suppressors / TVS Diodes TPD2E009DBZR by TECH PUBLIC deliver reliable and efficient circuit protection for sensitive electronics. Built with advanced design, they safeguard devices from electrostatic discharge (ESD) and transient voltage events, ensuring system reliability in industrial, automotive, and consumer applications.

As part of the ESD Suppressors / TVS Diodes category, the TPD2E009DBZR provides exceptional performance, meeting the demanding requirements of modern electronics.

Technical Specifications of TPD2E009DBZR

• Manufacturer: TECH PUBLIC

• Part Number: TPD2E009DBZR

• Category: Circuit Protection, ESD Suppressors / TVS Diodes

• Function: ESD and transient voltage suppression

• Channels: Dual-channel protection

• Clamping Voltage: Low for enhanced device safety

• Package Type: SOT-23

• Compliance: RoHS-compliant

The TPD2E009DBZR is ideal for safeguarding high-speed data lines and precision circuitry.

Key Features of TPD2E009DBZR ESD Suppressors / TVS Diodes

• High-performance ESD suppression for sensitive electronics

• Low clamping voltage to protect against transients

• Compact SOT-23 package for space-constrained designs

• Dual-channel protection in one device

• Compliant with IEC standards for ESD immunity

This circuit protection device offers strong defense in a small form factor, perfect for portable and embedded systems.

Applications of TPD2E009DBZR

• Consumer Electronics

• Automotive Control Modules

• Communication Devices

• Industrial Controllers

• Data Line Protection

• Medical Equipment

Its dual-channel capability makes it highly efficient in ESD Suppressors / TVS Diodes applications requiring both high performance and minimal board space.

Wiring and Connection Overview

• Mounting Type: Surface-mount (SOT-23 package)

• Number of Channels: 2

• Primary Use: ESD and transient voltage protection

• Integration: Can be placed close to I/O ports for optimal suppression

Use Case Scenario: USB Interface Protection

Problem: A manufacturer needed reliable circuit protection for USB ports in a portable device.

Solution: The TPD2E009DBZR ESD Suppressors / TVS Diodes provided low clamping voltage and dual-channel support, ensuring USB signal integrity.

Result: Extended device lifespan and improved resistance to electrostatic damage.

Also Available from Other Manufacturers

If you are looking for alternatives to the TPD2E009DBZR, consider:

• Texas Instruments – Offers a wide range of ESD Suppressors / TVS Diodes designed for precision and high-reliability circuit protection applications.

Download Datasheet for TPD2E009DBZR

[Download the TPD2E009DBZR Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

• 100% Original TECH PUBLIC Components
• Global Shipping – USA, India, Australia, Europe, and more
• Competitive Pricing for All Orders
• Access to Datasheets & Technical Support
• Secure Transactions and Quick Delivery

FAQs – TPD2E009DBZR ESD Suppressors / TVS Diodes

Q1. What is the function of this device?
It protects electronic circuits from ESD and voltage transients.

Q2. How many channels does it support?
It supports dual-channel protection.

Q3. Can it be used in automotive applications?
Yes, it’s ideal for automotive electronics.

Q4. Is it RoHS-compliant?
Yes, it meets environmental compliance standards.

Q5. Do you ship worldwide?
Yes, we ship to USA, India, Australia, Europe, and globally.

Conclusion

The TPD2E009DBZR ESD Suppressors / TVS Diodes by TECH PUBLIC are a compact, reliable, and high-performance circuit protection solution. Perfect for safeguarding sensitive electronics, they are a top choice in the ESD Suppressors / TVS Diodes category.

Order today from Xon Electronics for quick delivery to USA, India, Australia, Europe, and more.

TO-3 Circuit Board Hardware - PCB by PPT – Reliable PCB Mounting Solutions

The Circuit Board Hardware - PCB TO-3 by PPT delivers strong and durable mounting solutions for electronic assemblies. Designed for electromechanical stability and efficient layout, this hardware ensures secure placement of TO-3 packages on printed circuit boards. Ideal for high-power components, the TO-3 Circuit Board Hardware - PCB offers mechanical strength, heat dissipation benefits, and ease of installation.

Technical Specifications of TO-3 Circuit Board Hardware - PCB

• Manufacturer: PPT

• Part Number: TO-3

• Category: Electromechanical, Hardware, Circuit Board Hardware - PCB

• Application: TO-3 package mounting

• Material: Durable metal construction for heat resistance

• Mounting Style: PCB through-hole or panel mount

• Compatibility: TO-3 power transistor and regulator packages

• Finish: Corrosion-resistant coating

This Circuit Board Hardware - PCB ensures long-lasting stability in applications where mechanical reliability is critical.

Key Features of TO-3 Circuit Board Hardware - PCB

• Strong and reliable PCB mounting for TO-3 devices

• Compatible with high-power semiconductors

• Electromechanical durability for industrial environments

• Easy installation on standard PCBs

• Corrosion-resistant finish for extended service life

When designing robust assemblies, the TO-3 Circuit Board Hardware - PCB stands out in the hardware and circuit board hardware - PCB category for its strength and precision fit.

Applications of TO-3 Circuit Board Hardware - PCB

• Power Amplifiers

• Voltage Regulators

• Industrial Control Systems

• Audio Equipment

• High-Power Switching Devices

Its rugged build makes it a trusted solution in industries where electromechanical stability and dependable hardware are a priority.

Wiring and Connection Overview

• Designed for secure through-hole PCB mounting

• Compatible with standard TO-3 transistor pin layouts

• Provides mechanical support and optimal heat conduction

• Simple assembly for production or repair use

Use Case Scenario: High-Power Audio Amplifier

Problem: An amplifier manufacturer required secure and thermally efficient mounting for high-power TO-3 transistors.

Solution: The TO-3 Circuit Board Hardware - PCB by PPT provided both mechanical support and effective heat dissipation.

Result: Increased product reliability and reduced component failures thanks to superior circuit board hardware - PCB integration.

Also Available from Other Manufacturers

Looking for alternatives?
Explore Circuit Board Hardware - PCB from:

• MIC – Offers a range of high-quality electromechanical and hardware solutions for mounting and securing components in PCB assemblies.

Download Datasheet for TO-3 Circuit Board Hardware - PCB

[Download the TO-3 Datasheet from Xon Electronics]

Why Buy from Xon Electronics?

• 100% Original PPT Hardware
• Global Shipping – USA, India, Australia, Europe & more
• Competitive Pricing & Volume Discounts
• Instant Datasheet Access
• Secure Ordering & Payment

FAQs – TO-3 Circuit Board Hardware - PCB

Q1. What is the TO-3 hardware used for?
It’s designed for securely mounting TO-3 packaged components on PCBs.

Q2. Is it suitable for high-power applications?
Yes, it’s ideal for high-power devices needing both mechanical and thermal stability.

Q3. Can I use it in audio systems?
Absolutely – it’s common in power amplifiers and professional audio equipment.

Q4. Does it support standard TO-3 packages?
Yes, it’s fully compatible with industry-standard TO-3 layouts.

Q5. Do you offer global shipping?
Yes! We ship to USA, India, Australia, Europe, and worldwide.

Conclusion

The TO-3 Circuit Board Hardware - PCB by PPT is a durable, reliable, and easy-to-install mounting solution for high-power TO-3 components. Whether for industrial control systems, audio amplifiers, or voltage regulation, it excels in electromechanical performance and circuit board hardware - PCB reliability.

Order now from Xon Electronics for fast delivery to USA, India, Australia, Europe, and beyond.

RK16812MG099 Potentiometers by ALPS – Precision Control for Audio and Industrial Systems

The Potentiometers RK16812MG099 by ALPS are premium-quality rotary potentiometers designed for smooth operation, precise adjustments, and long-term reliability. ALPS, a leading manufacturer in the electronics industry, is known for delivering components that meet professional standards in performance and durability. As part of the Passive Components, Potentiometers, Trimmers & Rheostats, Potentiometers by ALPS category, the RK16812MG099 is ideal for applications where accuracy and control are essential.

In this blog, we’ll cover the technical specifications, key features, application areas, wiring configuration, and why purchasing from Xon Electronics ensures the best value with global delivery.

Technical Specifications of RK16812MG099

• Manufacturer: ALPS

• Part Number: RK16812MG099

• Type: Rotary Potentiometer

• Resistance Value: 10 kO

• Tolerance: ±20%

• Number of Gangs: Dual (Stereo)

• Mounting Style: Panel Mount

• Shaft Type: Knurled, 6 mm diameter

• Rotation Angle: 300°

• Category: Passive Components, Potentiometers, Trimmers & Rheostats, Potentiometers by ALPS

Designed for accurate signal control, this model ensures dependable operation across a wide range of professional and consumer applications.

Key Features of RK16812MG099 Potentiometers

• Smooth, Precise Control – Allows for accurate adjustments in critical applications

• High Durability – Built from quality materials for extended operational life

• Stereo (Dual Gang) Design – Perfect for balanced audio control

• Compact, Easy Mounting – Fits neatly into equipment panels

• Low-Noise Operation – Ideal for audio and signal processing systems

These advantages make the RK16812MG099 Potentiometers by ALPS a preferred choice in Passive Components, Potentiometers, Trimmers & Rheostats, Potentiometers by ALPS for engineers and designers alike.

Applications of RK16812MG099 Potentiometers

Common uses include:

• Audio Equipment (Mixers, Amplifiers, Equalizers)

• Industrial Control Panels

• Professional Sound Systems

• Consumer Electronics

• Musical Instruments

• Test and Measurement Devices

In all these applications, Passive Components, Potentiometers, Trimmers & Rheostats, Potentiometers by ALPS ensure precision, reliability, and smooth control.

Wiring and Connection Overview

Typical wiring for the RK16812MG099:

[Terminal 1] – Input signal
[Terminal 2] – Output (wiper)
[Terminal 3] – Ground reference

This standard connection allows easy integration into both new designs and replacement projects.

Use Case Scenario: Professional Audio Mixer Upgrade

Scenario: A recording studio needed premium potentiometers for upgrading its main mixing console.
Problem: Old potentiometers had become noisy and inconsistent over time.
Solution: The RK16812MG099 Potentiometers by ALPS delivered smooth, precise, and noise-free operation.
Result: Enhanced audio clarity, improved user experience, and extended equipment lifespan.

Download Datasheet for RK16812MG099

Need technical drawings, torque specifications, or compliance data?

Download RK16812MG099 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Passive Components, Potentiometers, Trimmers & Rheostats, Potentiometers by ALPS with:

• 100% Authentic ALPS Products
• Global Shipping – USA, India, Australia, Europe & more
• Bulk Pricing for OEMs and Distributors
• Expert Technical Assistance
• Safe and Secure Online Ordering

Order now from www.xonelec.com for premium potentiometers delivered worldwide.

Conclusion

The RK16812MG099 Potentiometers by ALPS provide precision, durability, and smooth performance for audio, industrial, and electronic applications. As part of the Passive Components, Potentiometers, Trimmers & Rheostats, Potentiometers by ALPS product range, they stand out as a reliable choice for professionals and hobbyists alike. Available now from Xon Electronics with fast global shipping to USA, India, Australia, Europe, and more.

FAQs – RK16812MG099 Potentiometers by ALPS

Q1. What is the resistance value of the RK16812MG099?
It has a resistance value of 10 kO.

Q2. Is it suitable for professional audio use?
Yes, it’s ideal for noise-free, smooth audio adjustments.

Q3. How is it mounted?
It uses a panel mount with a knurled shaft.

Q4. Where can I purchase it globally?
From www.xonelec.com, shipping to USA, India, Australia, Europe, and other countries.

934125100 CA 3 LD Circular MIL Spec Connector by Hirschmann – Rugged and Reliable for Harsh Environments

The Circular MIL Spec Connector  934125100 CA 3 LD by Hirschmann is engineered for robust and dependable performance in demanding industrial and military applications. Built to meet stringent specifications, this connector ensures secure electrical connections even under extreme conditions. As part of the Connectors, Circular Connectors, Circular MIL Spec Connectors, Circular MIL Spec Connector by Hirschmann category, it is a top choice for engineers requiring durability and reliability.

In this blog, we’ll explore its technical specifications, unique features, common applications, wiring configuration, and reasons to source it from Xon Electronics with worldwide delivery.

Technical Specifications of 934125100 CA 3 LD

• Manufacturer: Hirschmann

• Part Number: 934125100 CA 3 LD

• Type: Circular MIL Spec Connector

• Contact Configuration: 3-Pin

• Mounting Type: Cable Mount

• Contact Gender: Socket

• Termination Style: Solder

• Shell Size: CA 3

• Material: High-grade metal housing

• Category: Connectors, Circular Connectors, Circular MIL Spec Connectors, Circular MIL Spec Connector by Hirschmann

This connector is designed to provide reliable operation in vibration-prone and moisture-rich environments.

Key Features of 934125100 CA 3 LD

• Rugged Construction – Metal housing for mechanical protection

• Moisture & Dust Resistant – Suitable for harsh environments

• Secure Locking Mechanism – Ensures stable mating connection

• High Electrical Reliability – Consistent performance under load

• Versatile Design – Compatible with various industrial and military systems

These benefits make it one of the most trusted products in the Connectors, Circular Connectors, Circular MIL Spec Connectors, Circular MIL Spec Connector by Hirschmann range.

Applications of 934125100 CA 3 LD

The 934125100 CA 3 LD is widely used in:

• Military Communication Equipment

• Industrial Automation Systems

• Aerospace and Defense Applications

• Marine Electronics

• Transportation and Heavy Machinery

• Outdoor Power and Signal Systems

Engineers choose these Connectors, Circular Connectors, Circular MIL Spec Connectors, Circular MIL Spec Connector by Hirschmann when they need a tough, long-lasting connector solution.

Wiring and Connection Overview

Typical wiring for the 934125100 CA 3 LD:

[Wire Preparation] ? Strip wire ends ? Solder to connector contacts ? Insert into connector shell ? Engage locking system

This design allows fast installation while maintaining a secure and stable connection.

Use Case Scenario: Military Communication Device

Scenario: A defense equipment manufacturer required a durable connector for field communication devices.
Problem: Previous connectors failed in wet and high-vibration environments.
Solution: The 934125100 CA 3 LD Circular MIL Spec Connector by Hirschmann offered superior sealing, rugged housing, and stable contact performance.
Result: Improved operational reliability and reduced maintenance costs.

Download Datasheet for 934125100 CA 3 LD

Need full technical data, environmental ratings, or dimensional drawings?

Download 934125100 CA 3 LD Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Connectors, Circular Connectors, Circular MIL Spec Connectors, Circular MIL Spec Connector by Hirschmann with:

• 100% Authentic Hirschmann Products
• Global Shipping – USA, India, Australia, Europe & more
• Competitive Bulk Pricing for OEMs and Distributors
• Technical Support for Selection & Integration
• Safe, Secure, and Fast Online Ordering

Order now from www.xonelec.com for high-performance connectors delivered worldwide.

Conclusion

The 934125100 CA 3 LD Circular MIL Spec Connector by Hirschmann combines rugged construction, environmental sealing, and secure connectivity for critical applications. As part of the Connectors, Circular Connectors, Circular MIL Spec Connectors, Circular MIL Spec Connector by Hirschmann family, it delivers unmatched reliability in both industrial and military environments. Available now from Xon Electronics with global shipping to USA, India, Australia, Europe, and more.

FAQs – 934125100 CA 3 LD Circular MIL Spec Connector

Q1. How many contacts does the 934125100 CA 3 LD have?
It has a 3-pin contact configuration.

Q2. What environments is it suitable for?
It is ideal for harsh environments including military, marine, and outdoor industrial use.

Q3. How is the connection secured?
It uses a locking mechanism for a stable and secure connection.

Q4. Where can I buy it globally?
From www.xonelec.com, with delivery to USA, India, Australia, Europe, and other countries.

FM0207/4K7/1 Metal Film Resistors - Through Hole by Netech – Precision and Reliability for Electronic Circuits

The Metal Film Resistors - Through Hole FM0207/4K7/1 by Netech are high-precision resistors designed for stable performance and long-term reliability in electronic applications. Manufactured by Netech, these components deliver excellent accuracy, low noise, and superior temperature stability. Belonging to the Passive Components, Resistors Film Resistors, Metal Film Resistors - Through Hole by Netech category, they are widely used in consumer electronics, industrial controls, and instrumentation systems.

In this blog, we’ll discuss the technical specifications, standout features, application areas, connection details, and why sourcing from Xon Electronics is a smart choice for buyers worldwide.

Technical Specifications of FM0207/4K7/1

• Manufacturer: Netech

• Part Number: FM0207/4K7/1

• Type: Metal Film Resistor – Through Hole

• Resistance Value: 4.7 kO

• Tolerance: ±1%

• Power Rating: 0.6W

• Temperature Coefficient: ±50 ppm/°C

• Mounting Type: Through Hole

• Category: Passive Components, Resistors Film Resistors, Metal Film Resistors - Through Hole by Netech

This model provides consistent electrical characteristics, even under varying temperature and environmental conditions.

Key Features of FM0207/4K7/1

• High Precision – ±1% tolerance for accurate resistance values

• Low Noise – Ensures clean signal performance in sensitive circuits

• Stable Over Temperature – Maintains reliability across operating ranges

• Durable Coating – Protects against moisture and mechanical stress

• Through-Hole Mounting – Secure fit for long-lasting connections

With these advantages, the FM0207/4K7/1 stands out among Passive Components, Resistors Film Resistors, Metal Film Resistors - Through Hole by Netech for quality and dependability.

Applications of FM0207/4K7/1

The FM0207/4K7/1 is suitable for:

• Consumer Electronics

• Audio Equipment

• Industrial Control Systems

• Measuring and Testing Instruments

• Power Supplies

• Communication Devices

Engineers choose these Passive Components, Resistors Film Resistors, Metal Film Resistors - Through Hole by Netech when they need precise, stable, and low-noise resistance in their circuits.

Wiring and Connection Overview

Typical installation for the FM0207/4K7/1:

[Through Hole Leads] ? Insert into PCB holes ? Solder securely on the reverse side ? Trim excess lead length

The through-hole design ensures robust mechanical and electrical connections, ideal for both automated and manual assembly.

Use Case Scenario: Industrial Signal Processing Unit

Scenario: A manufacturer of industrial control systems required resistors with high accuracy and low noise for their signal processing boards.
Problem: Previous resistors caused drift and distortion in long-term usage.
Solution: The FM0207/4K7/1 Metal Film Resistors - Through Hole by Netech delivered precise resistance values and exceptional stability.
Result: Improved signal quality, reduced calibration needs, and enhanced system reliability.

Download Datasheet for FM0207/4K7/1

Looking for complete technical details, compliance certifications, or performance graphs?

Download FM0207/4K7/1 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Passive Components, Resistors Film Resistors, Metal Film Resistors - Through Hole by Netech with:

• 100% Authentic Netech Components
• Global Shipping – USA, India, Australia, Europe & more
• Bulk Pricing for OEMs and Distributors
• Expert Technical Assistance
• Safe and Secure Online Ordering

Order now from www.xonelec.com for premium quality resistors delivered worldwide.

Conclusion

The FM0207/4K7/1 Metal Film Resistors - Through Hole by Netech provide unmatched accuracy, stability, and durability, making them an excellent choice for precision electronics. As part of the Passive Components, Resistors Film Resistors, Metal Film Resistors - Through Hole by Netech family, they meet the needs of demanding industrial and consumer applications. Available now from Xon Electronics with shipping to USA, India, Australia, Europe, and beyond.

FAQs – FM0207/4K7/1 Metal Film Resistor

Q1. What is the tolerance of this resistor?
It has a ±1% tolerance for precise resistance values.

Q2. What is the power rating?
It is rated for 0.6W.

Q3. Is it suitable for audio applications?
Yes, its low noise characteristics make it ideal for high-fidelity audio equipment.

Q4. Where can I purchase it globally?
From www.xonelec.com, with delivery to USA, India, Australia, Europe, and other countries.

1882832 Pluggable Terminal Blocks by Phoenix Contact – Reliable Connection Solutions for Industrial & Electronic Applications

The Pluggable Terminal Blocks 1882832 by Phoenix Contact are high-quality, modular connectors designed to simplify wiring and ensure secure electrical connections. Built with Phoenix Contact’s precision engineering, these terminal blocks deliver outstanding performance, reliability, and flexibility for a variety of applications. As part of the Connectors, Terminal Blocks, Pluggable Terminal Blocks by Phoenix Contact category, they are widely used in control panels, machinery, and industrial automation systems.

In this blog, we will discuss technical specifications, key features, application areas, wiring details, and why you should source them from Xon Electronics for worldwide delivery.

Technical Specifications of 1882832

• Manufacturer: Phoenix Contact

• Part Number: 1882832

• Type: Pluggable Terminal Block

• Number of Positions: 6

• Pitch: 5.08 mm

• Current Rating: 12A

• Voltage Rating: 320V

• Mounting Type: Plug-In Connection

• Wire Range: 24–12 AWG

• Category: Connectors, Terminal Blocks, Pluggable Terminal Blocks by Phoenix Contact

These specifications make the 1882832 a dependable choice for electrical installations requiring secure and repeatable connections.

Key Features of 1882832 Pluggable Terminal Blocks

• Modular Design – Easy installation and replacement without rewiring

• High Current & Voltage Capacity – Supports demanding applications

• Reliable Contact Technology – Ensures consistent electrical performance

• Space-Saving Construction – Ideal for compact control cabinets

• Durable Materials – Long-lasting and resistant to wear

These features make it a standout in the Connectors, Terminal Blocks, Pluggable Terminal Blocks by Phoenix Contact product range, ensuring optimal performance even in harsh conditions.

Applications of 1882832

The 1882832 is suitable for various electrical and industrial uses:

• Industrial Control Panels

• Automation and Process Control Systems

• Power Distribution Units

• Machinery and Equipment Wiring

• Communication and Signal Systems

• Renewable Energy Installations

For engineers and electricians, these Connectors, Terminal Blocks, Pluggable Terminal Blocks by Phoenix Contact provide the flexibility and reliability needed for modern systems.

Wiring and Connection Overview

Typical wiring setup for the 1882832:

[Wire Input] ? Strip wire to required length ? Insert into terminal - Tighten securing screw/clamp
-
[Pluggable Connection] ? Mate with corresponding header for quick installation or removal

This plug-and-play design saves installation time and allows for easy maintenance.

Use Case Scenario: Automation System Upgrade

Scenario: An automation integrator needed a fast and reliable way to connect and disconnect wiring in a modular control cabinet.
Problem: Fixed terminal blocks required time-consuming rewiring during upgrades.
Solution: The 1882832 Pluggable Terminal Blocks by Phoenix Contact offered quick, tool-free disconnection and secure reconnection.
Result: Reduced maintenance time, improved flexibility, and increased overall system uptime.

Download Datasheet for 1882832

Need complete technical details, dimensional drawings, or safety certifications?

Download 1882832 Datasheet from Xon Electronics

Why Buy from Xon Electronics?

Xon Electronics offers genuine Connectors, Terminal Blocks, Pluggable Terminal Blocks by Phoenix Contact with:

• 100% Authentic Phoenix Contact Products
• Global Shipping – USA, India, Australia, Europe & more
• Bulk Discounts for OEMs and Distributors
• Expert Technical Support for Integration
• Secure Online Ordering

Order now from www.xonelec.com and power your projects with world-class connection technology.

Conclusion

The 1882832 Pluggable Terminal Blocks by Phoenix Contact are a reliable and efficient choice for industrial, automation, and electrical wiring needs. With their modular design, robust performance, and ease of use, they stand out in the Connectors, Terminal Blocks, Pluggable Terminal Blocks by Phoenix Contact product range. Available now at Xon Electronics with worldwide shipping to USA, India, Australia, Europe, and other countries.

FAQs – 1882832 Pluggable Terminal Block

Q1. How many positions does the 1882832 have?
It has 6 positions with a pitch of 5.08 mm.

Q2. What is the current rating?
It supports up to 12A current capacity.

Q3. Is this suitable for industrial automation systems?
Yes, it’s designed for control panels, machinery, and process control applications.

Q4. Where can I purchase it globally?
From www.xonelec.com, with shipping to USA, India, Australia, Europe, and more.