Introduction

The Thin Film Resistors - SMD ERA-6AEB71R5V by Panasonic are precision-engineered surface-mount resistors designed to deliver accurate resistance values and long-term stability in advanced electronic circuits. Manufactured by Panasonic, a globally trusted name in electronic components, this resistor ensures low noise, excellent temperature stability, and reliable performance. As part of Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD, the ERA-6AEB71R5V Thin Film Resistors - SMD by Panasonic are widely used in precision-driven applications.

Technical Specifications of ERA-6AEB71R5V Thin Film Resistors - SMD

General Specifications

• Manufacturer: Panasonic

• Part Number: ERA-6AEB71R5V

• Product Type: Thin Film Resistor – SMD

• Resistance Value: 71.5 O

• Tolerance: Tight tolerance for high accuracy

• Package Type: SMD

• Thermal Stability: Excellent temperature coefficient

• Product Category: Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD

These specifications make the ERA-6AEB71R5V Thin Film Resistors - SMD by Panasonic ideal for precise and reliable circuit designs.

Key Features of ERA-6AEB71R5V Thin Film Resistors - SMD

Design and Performance Benefits

• High precision resistance value

• Low noise characteristics

• Excellent thermal and electrical stability

• Compact SMD footprint for space-efficient designs

• Proven performance within Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD

The ERA-6AEB71R5V Thin Film Resistors - SMD by Panasonic are engineered to meet strict performance and reliability standards.

Applications of ERA-6AEB71R5V Thin Film Resistors - SMD

Common Use Cases

• Precision measurement circuits

• Industrial control electronics

• Consumer electronic devices

• Signal conditioning and amplification circuits

• Designs utilizing Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD

These applications demonstrate the versatility of the ERA-6AEB71R5V Thin Film Resistors - SMD by Panasonic across various electronic systems.

Mounting and Usage Overview

Installation Guidelines

• Place the resistor on compatible SMD pads

• Solder using standard reflow soldering methods

• Avoid thermal stress during assembly

• Verify resistance value after installation

Proper mounting ensures long-term performance of Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD.

Use Case Example: Precision Analog Circuit

Practical Implementation

• Application: Analog signal processing PCB

• Challenge: Maintaining accurate resistance values

• Solution: ERA-6AEB71R5V Thin Film Resistors - SMD by Panasonic

• Result: Stable signal output and improved circuit accuracy

This example highlights the importance of high-quality Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD in precision electronics.

Datasheet Information

For detailed electrical characteristics, tolerance limits, and thermal performance data, refer to the official Panasonic datasheet available through authorized distributors.

Why Buy ERA-6AEB71R5V Thin Film Resistors - SMD from XON?

Purchasing ERA-6AEB71R5V Thin Film Resistors - SMD by Panasonic from www.xonelec.com ensures:

• 100% genuine Panasonic components

• Competitive pricing and bulk availability

• Fast global shipping

• Dedicated customer and technical support

Order confidently from x-on electronics or xon electronics for trusted Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD.

FAQs – ERA-6AEB71R5V Thin Film Resistors - SMD

What is the primary use of ERA-6AEB71R5V?

It is used for accurate resistance control in electronic circuits.

Is this resistor suitable for surface-mount designs?

Yes, it is specifically designed for SMD applications.

Does it provide stable performance over temperature?

Yes, it offers excellent thermal and electrical stability.

Can it be used in industrial electronics?

Yes, it is suitable for industrial and commercial applications.

Where can I buy this resistor online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The ERA-6AEB71R5V Thin Film Resistors - SMD by Panasonic provide a reliable, precise, and space-efficient solution for modern electronic designs. As a trusted component within Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD, this resistor is an excellent choice for engineers seeking accuracy and long-term performance.

Introduction

The Thin Film Resistors - SMD ERA-6AEB1051V by Panasonic are high-precision surface-mount resistors designed for stable and accurate resistance performance in modern electronic circuits. Manufactured by Panasonic, a globally trusted leader in electronic components, this resistor offers excellent reliability, low tolerance, and thermal stability. As part of Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD, the ERA-6AEB1051V Thin Film Resistors - SMD by Panasonic are widely used in precision-driven electronic applications.

Technical Specifications of ERA-6AEB1051V Thin Film Resistors - SMD

General Specifications

• Manufacturer: Panasonic

• Part Number: ERA-6AEB1051V

• Product Type: Thin Film Resistor – SMD

• Resistance Value: 1.05 kO

• Tolerance: Tight tolerance for precision applications

• Package Type: SMD

• Temperature Stability: High thermal reliability

• Product Category: Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD

These specifications make the ERA-6AEB1051V Thin Film Resistors - SMD by Panasonic ideal for accurate and dependable circuit designs.

Key Features of ERA-6AEB1051V Thin Film Resistors - SMD

Design and Performance Benefits

• High precision resistance value

• Excellent temperature coefficient stability

• Low noise characteristics

• Compact SMD package for space-saving designs

• Proven performance within Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD

The ERA-6AEB1051V Thin Film Resistors - SMD by Panasonic are engineered to meet demanding electrical performance standards.

Applications of ERA-6AEB1051V Thin Film Resistors - SMD

Common Use Cases

• Industrial control systems

• Consumer electronics circuits

• Measurement and sensing equipment

• Communication and signal processing devices

• Designs utilizing Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD

These applications demonstrate the versatility of the ERA-6AEB1051V Thin Film Resistors - SMD by Panasonic across multiple industries.

Mounting and Usage Overview

Installation Guidelines

• Place the resistor on compatible SMD pads

• Solder using standard reflow techniques

• Avoid excessive heat exposure during assembly

• Verify resistance value after installation

Proper mounting ensures long-term performance of Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD.

Use Case Example: Precision Signal Conditioning Circuit

Practical Implementation

• Application: Signal conditioning PCB

• Challenge: Maintaining accurate resistance values

• Solution: ERA-6AEB1051V Thin Film Resistors - SMD by Panasonic

• Result: Stable signal performance and improved measurement accuracy

This example highlights the importance of high-quality Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD in precision electronics.

Datasheet Information

For detailed electrical characteristics, resistance tolerance, and thermal performance data, refer to the official Panasonic datasheet available through authorized distributors.

Why Buy ERA-6AEB1051V Thin Film Resistors - SMD from XON?

Purchasing ERA-6AEB1051V Thin Film Resistors - SMD by Panasonic from www.xonelec.com ensures:

• 100% genuine Panasonic components

• Competitive pricing and bulk availability

• Fast global shipping

• Dedicated customer and technical support

Order confidently from x-on electronics or xon electronics for trusted Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD.

FAQs – ERA-6AEB1051V Thin Film Resistors - SMD

What is the main use of ERA-6AEB1051V?

It is used for precise resistance control in electronic circuits.

Is this resistor suitable for SMD applications?

Yes, it is designed specifically for surface-mount technology.

Does it provide stable performance over temperature?

Yes, it offers excellent thermal and resistance stability.

Can it be used in industrial electronics?

Yes, it is suitable for industrial and commercial applications.

Where can I buy this component online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The ERA-6AEB1051V Thin Film Resistors - SMD by Panasonic provide a reliable, accurate, and space-efficient solution for precision electronic designs. As a trusted component within Passive Components, Resistors, Film Resistors, Thin Film Resistors - SMD, this resistor is an excellent choice for engineers seeking performance and long-term stability.

MF-R050 Resettable Fuses – Reliable Overcurrent Safety

The Resettable Fuses - PPTC MF-R050 by Bourns are advanced polymer-based protection devices designed to safeguard electronic circuits against overcurrent and short-circuit conditions. These fuses automatically reset after the fault is removed, reducing downtime and eliminating the need for fuse replacement.

Engineers implementing dependable bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC solutions rely on MF-R050 for consistent electrical safety and long operational life.

Available from www.xonelec.com — also trusted globally as X-On Electronics and XON Electronics — these components support robust protection across consumer, industrial, and communication electronics.

Technical Specifications of MF-R050

Manufacturer: Bourns
Part Number: MF-R050
Product Type: PPTC Resettable Fuse
Hold Current: 0.50A (typical)
Trip Current: Optimized fast trip behavior
Maximum Voltage: Industry standard rating
Initial Resistance: Low resistance for minimal power loss
Response Time: Rapid thermal reaction
Mounting Type: Radial Through Hole

Engineered for professional bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC, this device delivers dependable protection and automatic reset functionality.

Key Features of MF-R050 Resettable Fuses

• Automatic reset after fault removal

• Low resistance during normal operation

• Fast response to overcurrent events

• Long cycle life and durability

• Compact PCB footprint

These advantages make it ideal for applications requiring dependable bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC performance.

Applications of MF-R050

The MF-R050 is widely used in:

• Consumer electronic devices

• Battery protection circuits

• USB and interface ports

• Industrial control systems

• Telecommunications equipment

• Power distribution modules

It integrates seamlessly into systems that demand reliable bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC for safe operation.

Wiring and Installation Overview

Through-Hole Mounting Guidelines

• Install in series with the protected load.

• Maintain proper lead spacing for heat dissipation.

• Avoid excessive soldering temperatures.

• Ensure correct current rating selection.

Proper installation ensures optimal performance and device longevity.

Use Case Scenario

Portable Device Power Protection

Scenario: A portable electronics manufacturer required resettable protection for battery circuits.
Challenge: Minimizing downtime and service costs.
Solution: MF-R050 delivered automatic reset after fault conditions.
Result: Increased product reliability and reduced maintenance expenses.

Download Datasheet

For complete electrical specifications, thermal characteristics, safety approvals, and mechanical drawings, download the official datasheet from the manufacturer or authorized distributors.

MF-R050 Datasheet

Why Buy from XON Electronics?

• Genuine Bourns components

• Global inventory availability

• Fast international shipping

• Competitive bulk pricing

• Professional technical support

Order confidently from www.xonelec.com — known worldwide as X-On Electronics and XON Electronics.

Conclusion

The MF-R050 Resettable Fuses - PPTC by Bourns provide smart overcurrent protection, automatic reset capability, and long service life. They are ideal for modern electronic designs requiring maintenance-free safety solutions.

FAQs – MF-R050 Resettable Fuses

Q1. What happens when MF-R050 trips?
It increases resistance to limit current and protect the circuit.

Q2. Does MF-R050 automatically reset?
Yes, once the fault is cleared and temperature returns to normal.

Q3. Can MF-R050 be reused?
Yes, it supports thousands of reset cycles.

Q4. What mounting type does MF-R050 use?
It uses radial through-hole mounting.

Q5. Where can I purchase MF-R050?
It is available from authorized electronic distributors.

Introduction

The PCBs & Breadboards DC0805J-10X by Chip Quik are versatile prototyping solutions designed for engineers, developers, and electronics enthusiasts who require reliable platforms for circuit development and testing. Manufactured by Chip Quik, a trusted name in electronics tools and supplies, this product supports efficient prototyping and experimentation. As part of Tools & Supplies, Prototyping Products, PCBs & Breadboards, the DC0805J-10X PCBs & Breadboards by Chip Quik are widely used in R&D labs, educational environments, and electronics workshops.

Technical Specifications of DC0805J-10X PCBs & Breadboards

General Specifications

• Manufacturer: Chip Quik

• Part Number: DC0805J-10X

• Product Type: PCB / Breadboard

• Package Compatibility: 0805 SMD components

• Quantity: 10 boards per pack

• Material: High-quality FR-4

• Product Category: Tools & Supplies, Prototyping Products, PCBs & Breadboards

These specifications make the DC0805J-10X PCBs & Breadboards by Chip Quik ideal for rapid prototyping and circuit validation.

Key Features of DC0805J-10X PCBs & Breadboards

Design and Performance Benefits

• Optimized layout for 0805 surface-mount components

• Durable PCB material for repeated use

• Easy soldering and rework capability

• Compact size for bench-top prototyping

• Trusted performance within Tools & Supplies, Prototyping Products, PCBs & Breadboards

The DC0805J-10X PCBs & Breadboards by Chip Quik are designed to simplify circuit development and testing.

Applications of DC0805J-10X PCBs & Breadboards

Common Use Cases

• Electronic circuit prototyping

• SMD component testing

• Educational and training labs

• Research and development projects

• Projects requiring Tools & Supplies, Prototyping Products, PCBs & Breadboards

These applications highlight the flexibility of the DC0805J-10X PCBs & Breadboards by Chip Quik across various development environments.

Prototyping and Usage Overview

Installation and Usage Guidelines

• Place 0805 components onto the PCB pads

• Solder components using standard soldering tools

• Test and modify the circuit as required

• Rework or reuse the board for iterative design

Proper usage ensures effective prototyping with Tools & Supplies, Prototyping Products, PCBs & Breadboards.

Use Case Example: Rapid Circuit Development

Practical Implementation

• Application: Prototype testing for SMD circuits

• Challenge: Quick validation of 0805 components

• Solution: DC0805J-10X PCBs & Breadboards by Chip Quik

• Result: Faster development cycles and reliable test results

This use case demonstrates the value of quality Tools & Supplies, Prototyping Products, PCBs & Breadboards in electronics development.

Datasheet Information

For board layout details, material specifications, and usage guidelines, refer to the official Chip Quik datasheet documentation available through authorized distributors.

Why Buy DC0805J-10X PCBs & Breadboards from XON?

Purchasing DC0805J-10X PCBs & Breadboards by Chip Quik from www.xonelec.com ensures:

• 100% genuine Chip Quik products

• Competitive pricing and bulk availability

• Fast global shipping

• Dedicated customer and technical support

Order confidently from x-on electronics or xon electronics for trusted Tools & Supplies, Prototyping Products, PCBs & Breadboards.

FAQs – DC0805J-10X PCBs & Breadboards

What is the primary use of DC0805J-10X?

It is used for prototyping and testing circuits with 0805 SMD components.

Is this suitable for educational purposes?

Yes, it is ideal for training labs and learning environments.

Can the boards be reused?

Yes, with proper desoldering, the boards can be reused.

Is special equipment required?

Only standard soldering tools are needed.

Where can I buy this product online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The DC0805J-10X PCBs & Breadboards by Chip Quik provide a reliable, efficient, and flexible solution for electronic prototyping. As a trusted option within Tools & Supplies, Prototyping Products, PCBs & Breadboards, this product is an excellent choice for engineers and developers seeking precision and convenience in circuit design.

RXEF010 Resettable Fuses – Smart Overcurrent Protection

The Resettable Fuses - PPTC RXEF010 by Littelfuse are advanced polymer positive temperature coefficient (PPTC) devices designed to protect electronic circuits from overcurrent and short-circuit conditions. These fuses automatically reset after the fault is cleared, eliminating the need for manual replacement and reducing maintenance costs.

Engineers implementing reliable bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC solutions rely on RXEF010 for consistent electrical safety and long-term reliability.

Available from www.xonelec.com — also recognized globally as X-On Electronics and XON Electronics — these components support robust protection across consumer, industrial, and automotive electronics.

Technical Specifications of RXEF010

Manufacturer: Littelfuse
Part Number: RXEF010
Product Type: PPTC Resettable Fuse
Hold Current: Industry-standard rating
Trip Current: Optimized overcurrent response
Maximum Voltage: Suitable reminding voltage
Resistance: Low initial resistance
Response Time: Fast thermal trip behavior
Mounting Type: Through Hole

Engineered for professional bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC, this device delivers dependable fault protection and automatic reset functionality.

Key Features of RXEF010 Resettable Fuses

• Automatic reset after fault removal

• Low resistance during normal operation

• Fast response to overcurrent conditions

• Long cycle life and durability

• Compact and easy PCB integration

These features make it ideal for systems requiring dependable bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC performance.

Applications of RXEF010

The RXEF010 is widely used in:

• Consumer electronics protection

• USB and interface ports

• Battery packs and chargers

• Industrial control electronics

• Telecommunications equipment

• Automotive electronic modules

It integrates seamlessly into designs that depend on reliable bold: Circuit Protection, Thermistors, Resettable Fuses - PPTC for operational safety.

Wiring and Installation Overview

Through-Hole Mounting Guidelines

• Install in series with the protected load.

• Maintain adequate spacing for heat dissipation.

• Avoid excessive soldering temperature exposure.

• Ensure correct current rating selection.

Proper installation ensures optimal protection and device longevity.

Use Case Scenario

USB Power Port Protection

Scenario: A product designer needed overcurrent protection for USB charging ports.
Challenge: Preventing damage during accidental short circuits.
Solution: RXEF010 automatically tripped during faults and reset afterward.
Result: Improved user safety and reduced service requirements.

Download Datasheet

For detailed electrical ratings, trip curves, environmental specifications, and mounting dimensions, download the official datasheet from the manufacturer or authorized distributors.

RXEF010 Datasheet

Why Buy from XON Electronics?

• Genuine Littelfuse components

• Global inventory availability

• Fast international shipping

• Competitive bulk pricing

• Professional technical support

Order confidently from www.xonelec.com — trusted worldwide as X-On Electronics and XON Electronics.

Conclusion

The RXEF010 Resettable Fuses - PPTC by Littelfuse deliver smart overcurrent protection, automatic reset capability, and long operational life. They are ideal for modern electronic devices requiring maintenance-free protection.

FAQs – RXEF010 Resettable Fuses

Q1. What happens when RXEF010 trips?
It increases resistance to limit current and protects the circuit.

Q2. Does it reset automatically?
Yes, once the fault is removed and temperature cools.

Q3. Is it reusable?
Yes, it supports thousands of reset cycles.

Q4. What mounting type does it use?
It uses through-hole mounting.

Q5. Where can I buy RXEF010?
It is available from authorized electronic distributors.

Introduction

The Terminals SVH-41T-P1.1 by JST are precision-engineered electrical terminals designed to provide secure and reliable wire termination in electronic assemblies. Manufactured by JST, a globally trusted leader in interconnect solutions, this terminal ensures stable conductivity and long-term durability. As part of Connectors, Terminals, the SVH-41T-P1.1 Terminals by JST are widely used in industrial, automotive, and electronic applications.

Technical Specifications of SVH-41T-P1.1 Terminals

General Specifications

• Manufacturer: JST

• Part Number: SVH-41T-P1.1

• Product Type: Terminal

• Terminal Style: Crimp terminal

• Mounting Type: Wire termination

• Contact Material: High-conductivity copper alloy

• Plating: Tin plated

• Product Category: Connectors, Terminals

These specifications make the SVH-41T-P1.1 Terminals by JST ideal for consistent electrical performance and secure wire connections.

Key Features of SVH-41T-P1.1 Terminals

Design and Performance Benefits

• Strong and secure crimp connection

• Low electrical resistance for stable signal flow

• Durable construction for long service life

• Compatible with JST connector housings

• Proven reliability within Connectors, Terminals

The SVH-41T-P1.1 Terminals by JST are designed to meet demanding quality and performance requirements.

Applications of SVH-41T-P1.1 Terminals

Common Use Cases

• Industrial automation equipment

• Automotive wiring harnesses

• Consumer electronics assemblies

• Power supply connections

• Systems utilizing Connectors, Terminals

These applications highlight the versatility of the SVH-41T-P1.1 Terminals by JST in professional electronic systems.

Wiring and Connection Overview

Installation Guidelines

• Strip the wire insulation to the recommended length

• Insert the conductor into the terminal barrel

• Crimp using a compatible JST crimping tool

• Inspect the crimp to ensure secure electrical contact

Proper installation ensures optimal performance and longevity of Connectors, Terminals.

Use Case Example: Automotive Wiring Harness

Practical Implementation

• Application: Automotive wiring system

• Challenge: Reliable wire termination under vibration

• Solution: SVH-41T-P1.1 Terminals by JST

• Result: Stable electrical connection and long-term durability

This use case demonstrates the importance of high-quality Connectors, Terminals in demanding environments.

Datasheet Information

For detailed electrical ratings, material specifications, and crimping instructions, refer to the official JST datasheet available from authorized distributors.

Why Buy SVH-41T-P1.1 Terminals from XON?

Purchasing SVH-41T-P1.1 Terminals by JST from www.xonelec.com ensures:

• 100% genuine JST components

• Competitive pricing and bulk quantity availability

• Fast worldwide shipping

• Professional customer and technical support

Order confidently from x-on electronics or xon electronics for trusted Connectors, Terminals.

FAQs – SVH-41T-P1.1 Terminals

What is the primary use of SVH-41T-P1.1?

It is used for secure wire termination in electronic and electrical assemblies.

Is this terminal suitable for industrial applications?

Yes, it is designed for industrial and automotive-grade usage.

Does it provide reliable electrical conductivity?

Yes, it ensures low-resistance and stable electrical contact.

Is special tooling required for installation?

Yes, a compatible JST crimping tool is recommended.

Where can I buy this terminal online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The SVH-41T-P1.1 Terminals by JST offer a reliable, durable, and efficient solution for wire termination needs. As a trusted component within Connectors, Terminals, this terminal is an excellent choice for engineers seeking dependable electrical connections and long-term performance.

P4KE6.8CA ESD Protection Diodes / TVS Diodes by DOWO – Robust Surge Defense

The ESD Protection Diodes / TVS Diodes P4KE6.8CA by DOWO are high-performance transient voltage suppression components designed to safeguard sensitive electronic circuits from electrostatic discharge (ESD), lightning-induced surges, and transient overvoltage events. These diodes clamp excessive voltages quickly, preventing damage to downstream components.

Engineers implementing reliable bold: Circuit Protection, ESD Protection Diodes / TVS Diodes solutions rely on this device for fast response time and high surge capability across industrial and consumer electronics.

Available from www.xonelec.com — also known globally as X-On Electronics and XON Electronics — these components deliver consistent surge suppression performance.

Technical Specifications of P4KE6.8CA

Manufacturer: DOWO
Part Number: P4KE6.8CA
Product Type: Bidirectional TVS Diode
Working Peak Reverse Voltage: Approx. 6.8V
Breakdown Voltage: Industry standard range
Peak Pulse Power: High transient power capability
Response Time: Fast clamping response
Package Type: Axial Lead Package
Mounting Type: Through Hole

Designed for professional bold: Circuit Protection, ESD Protection Diodes / TVS Diodes, this diode ensures rapid voltage clamping and long-term reliability.

Key Features of P4KE6.8CA TVS Diodes

• Fast transient response time

• High peak pulse power capability

• Bidirectional protection for AC and DC lines

• Low leakage current

• Rugged axial lead construction

These features make it ideal for applications requiring dependable bold: Circuit Protection, ESD Protection Diodes / TVS Diodes performance.

Applications of P4KE6.8CA

The P4KE6.8CA is commonly used in:

• Communication interfaces

• Power supply protection

• Industrial control electronics

• Automotive electronics

• Consumer devices

• Data and signal line protection

It integrates seamlessly into circuits that depend on reliable bold: Circuit Protection, ESD Protection Diodes / TVS Diodes for system safety.

Wiring and Installation Overview

Through-Hole Mounting Guidelines

• Install across the protected signal or power line.

• Observe correct polarity when used in unidirectional mode.

• Keep lead lengths short for effective transient suppression.

• Avoid excessive soldering heat.

Correct installation maximizes protection effectiveness.

Use Case Scenario

Interface Port Surge Protection

Scenario: A device manufacturer needed ESD protection for sensitive communication ports.
Challenge: Preventing damage from electrostatic discharge events.
Solution: P4KE6.8CA provided fast voltage clamping and reliable surge absorption.
Result: Improved product durability and reduced field failures.

Download Datasheet

For complete electrical characteristics, surge ratings, thermal data, and package dimensions, download the official datasheet from the manufacturer or authorized distributors.

P4KE6.8CA Datasheet

Why Buy from XON Electronics?

• Genuine DOWO components

• Global inventory availability

• Fast international shipping

• Competitive bulk pricing

• Professional technical support

Order confidently from www.xonelec.com — trusted worldwide as X-On Electronics and XON Electronics.

Conclusion

The P4KE6.8CA ESD Protection Diodes / TVS Diodes by DOWO deliver fast transient suppression, high surge capability, and reliable circuit protection. They are an essential component for safeguarding sensitive electronics against voltage spikes.

FAQs – P4KE6.8CA ESD Protection Diodes / TVS Diodes

Q1. What is the primary function of the P4KE6.8CA?
It protects circuits from ESD and transient voltage surges.

Q2. Is this diode bidirectional?
Yes, it supports bidirectional transient suppression.

Q3. Can it be used in power line protection?
Yes, it is suitable for both signal and power line protection.

Q4. What mounting type does it use?
It uses through-hole axial mounting.

Q5. Where can I purchase this diode?
It is available through authorized electronic distributors.

Introduction

The Headers & Wire Housings PAP-06V-S by JST are high-quality wire-to-board connectivity components designed to deliver secure and stable electrical connections. Manufactured by JST, a globally trusted interconnect brand, this product offers excellent durability and consistent performance. As part of Connectors, Headers & Wire Housings, the PAP-06V-S Headers & Wire Housings by JST are widely used in compact and performance-driven electronic assemblies.

Technical Specifications of PAP-06V-S Headers & Wire Housings

General Specifications

• Manufacturer: JST

• Part Number: PAP-06V-S

• Product Type: Header / Wire Housing

• Connector Style: Wire-to-board

• Number of Positions: 6

• Mounting Type: PCB mating

• Housing Material: High-grade thermoplastic

• Product Category: Connectors, Headers & Wire Housings

These specifications make the PAP-06V-S Headers & Wire Housings by JST ideal for reliable and space-efficient interconnection solutions.

Key Features of PAP-06V-S Headers & Wire Housings

Design and Performance Benefits

• Secure mating for stable electrical connectivity

• Compact footprint for dense PCB layouts

• Durable housing for long operational life

• Easy installation and maintenance

• Trusted reliability within Connectors, Headers & Wire Housings

The PAP-06V-S Headers & Wire Housings by JST are engineered to meet modern electronic design requirements.

Applications of PAP-06V-S Headers & Wire Housings

Common Use Cases

• Consumer electronics products

• Industrial automation systems

• Embedded control modules

• Power and signal distribution boards

• Products utilizing Connectors, Headers & Wire Housings

These applications demonstrate the versatility of the PAP-06V-S Headers & Wire Housings by JST across various industries.

Wiring and Connection Overview

Installation Guidelines

• Crimp compatible JST terminals onto wires

• Insert terminals into the PAP housing until securely locked

• Align the housing with the mating PCB header

• Ensure proper engagement to maintain signal integrity

Correct installation enhances the performance and lifespan of Connectors, Headers & Wire Housings.

Use Case Example: Multi-Signal Control Board

Practical Implementation

• Application: Multi-signal control PCB

• Challenge: Reliable six-position wire-to-board connection

• Solution: PAP-06V-S Headers & Wire Housings by JST

• Result: Stable electrical performance and compact layout

This example highlights the importance of quality Connectors, Headers & Wire Housings in advanced electronic designs.

Datasheet Information

For complete electrical ratings, dimensional drawings, and material specifications, refer to the official JST datasheet available from authorized distributors.

Why Buy PAP-06V-S Headers & Wire Housings from XON?

Purchasing PAP-06V-S Headers & Wire Housings by JST from www.xonelec.com ensures:

• 100% genuine JST components

• Competitive pricing and bulk availability

• Fast global shipping

• Reliable customer and technical support

Order confidently from x-on electronics or xon electronics for trusted Connectors, Headers & Wire Housings.

FAQs – PAP-06V-S Headers & Wire Housings

What is the primary use of PAP-06V-S?

It is used for secure wire-to-board electrical connections.

Is this connector suitable for compact PCB designs?

Yes, it is ideal for space-constrained layouts.

Does it ensure stable electrical performance?

Yes, it provides consistent and reliable connectivity.

Is it compatible with JST crimp terminals?

Yes, it is designed for use with matching JST terminals.

Where can I buy this product online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The PAP-06V-S Headers & Wire Housings by JST deliver a compact, durable, and efficient solution for wire-to-board connectivity. As a trusted component within Connectors, Headers & Wire Housings, it is an excellent choice for engineers seeking reliability and long-term performance.

Introduction

The Headers & Wire Housings PAP-05V-S by JST are dependable wire-to-board connectivity components designed for secure and stable electrical connections. Manufactured by JST, a globally trusted name in interconnect technology, this product offers consistent performance and durability. As part of Connectors, Headers & Wire Housings, the PAP-05V-S Headers & Wire Housings by JST are widely used in compact and performance-driven electronic assemblies.

Technical Specifications of PAP-05V-S Headers & Wire Housings

General Specifications

• Manufacturer: JST

• Part Number: PAP-05V-S

• Product Type: Header / Wire Housing

• Connector Style: Wire-to-board

• Number of Positions: 5

• Mounting Type: PCB mating

• Housing Material: High-grade thermoplastic

• Product Category: Connectors, Headers & Wire Housings

These specifications make the PAP-05V-S Headers & Wire Housings by JST suitable for reliable and space-efficient interconnections.

Key Features of PAP-05V-S Headers & Wire Housings

Design and Performance Benefits

• Secure mating for stable electrical connectivity

• Compact footprint for dense PCB layouts

• Durable housing for long operational life

• Easy installation and maintenance

• Proven reliability within Connectors, Headers & Wire Housings

The PAP-05V-S Headers & Wire Housings by JST are engineered to meet modern electronic design requirements.

Applications of PAP-05V-S Headers & Wire Housings

Common Use Cases

• Consumer electronics devices

• Industrial automation systems

• Embedded control units

• Power and signal distribution boards

• Products utilizing Connectors, Headers & Wire Housings

These applications demonstrate the versatility of the PAP-05V-S Headers & Wire Housings by JST across various industries.

Wiring and Connection Overview

Installation Guidelines

• Crimp compatible JST terminals onto wires

• Insert terminals into the PAP housing until locked

• Align the housing with the mating PCB header

• Ensure proper engagement to maintain signal integrity

Proper installation improves the performance and lifespan of Connectors, Headers & Wire Housings.

Use Case Example: Industrial Control PCB

Practical Implementation

• Application: Industrial control board

• Challenge: Reliable multi-pin wire-to-board connection

• Solution: PAP-05V-S Headers & Wire Housings by JST

• Result: Stable electrical performance and compact design

This example highlights the importance of quality Connectors, Headers & Wire Housings in industrial electronics.

Datasheet Information

For detailed electrical ratings, dimensional drawings, and material specifications, refer to the official JST datasheet available from authorized distributors.

Why Buy PAP-05V-S Headers & Wire Housings from XON?

Purchasing PAP-05V-S Headers & Wire Housings by JST from www.xonelec.com ensures:

• 100% genuine JST components

• Competitive pricing and bulk availability

• Fast global shipping

• Reliable customer and technical support

Order confidently from x-on electronics or xon electronics for trusted Connectors, Headers & Wire Housings.

FAQs – PAP-05V-S Headers & Wire Housings

What is the primary use of PAP-05V-S?

It is used for secure wire-to-board electrical connections.

Is this connector suitable for compact PCB layouts?

Yes, it is ideal for space-constrained designs.

Does it ensure stable electrical performance?

Yes, it delivers consistent and reliable connectivity.

Is it compatible with JST crimp terminals?

Yes, it is designed for use with matching JST terminals.

Where can I buy this product online?

You can purchase it from www.xonelec.com with worldwide delivery.

Conclusion

The PAP-05V-S Headers & Wire Housings by JST provide a compact, durable, and efficient solution for wire-to-board connectivity. As a trusted component within Connectors, Headers & Wire Housings, it is an excellent choice for engineers seeking long-term reliability and performance.

1N4004 Rectifiers by KOME – Reliable Power Rectification

The Rectifiers 1N4004 by KOME are standard recovery rectifier diodes designed for efficient AC-to-DC conversion in power supplies, adapters, and general-purpose electronic circuits. These rectifiers offer dependable voltage handling, stable thermal performance, and long service life in industrial and consumer applications.

Design engineers working with bold: Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Rectifiers rely on the 1N4004 series for consistent electrical performance and cost-effective power conversion solutions.

Available from www.xonelec.com — also recognized globally as X-On Electronics and XON Electronics — these components ensure reliable power delivery in multiple applications.

Technical Specifications of 1N4004

Manufacturer: KOME
Part Number: 1N4004
Product Type: Standard Rectifier Diode
Peak Repetitive Reverse Voltage: 400V
Average Forward Current: 1A
Surge Current Capability: High surge tolerance
Recovery Type: Standard recovery
Package Type: DO-41
Mounting Type: Through Hole

Engineered for dependable performance in bold: Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Rectifiers, this diode provides stable rectification and long-term durability.

Key Features of 1N4004 Rectifiers

• High reverse voltage capability

• Stable forward current handling

• Rugged axial lead construction

• Excellent thermal reliability

• Cost-effective rectification solution

These advantages make it ideal for applications requiring reliable bold: Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Rectifiers.

Applications of 1N4004

The 1N4004 rectifier is widely used in:

• Power supply rectification circuits

• Battery chargers and adapters

• LED lighting drivers

• Consumer electronics

• Industrial control systems

• General-purpose rectifier applications

It integrates seamlessly into designs using professional bold: Semiconductors, Discrete Semiconductors, Diodes & Rectifiers, Rectifiers for efficient power conversion.

Wiring and Installation Overview

Through-Hole Diode Mounting

• Observe correct polarity before soldering.

• Maintain proper lead spacing for insulation.

• Avoid overheating during soldering.

• Provide adequate airflow for heat dissipation.

Proper installation ensures safe operation and extended service life.

Use Case Scenario

AC to DC Power Supply Module

Scenario: A designer needed a cost-effective rectifier for a compact power supply.
Challenge: Ensuring stable voltage handling and thermal reliability.
Solution: 1N4004 provided dependable rectification and long operational life.
Result: Improved power stability and reduced component failure rates.

Download Datasheet

For full electrical ratings, thermal characteristics, mechanical dimensions, and compliance details, download the official datasheet from the manufacturer or authorized distributors.

Why Buy from XON Electronics?

• Genuine KOME components

• Large global inventory

• Fast international shipping

• Competitive bulk pricing

• Dedicated technical support

Order confidently from www.xonelec.com — trusted worldwide as X-On Electronics and XON Electronics.

Conclusion

The 1N4004 Rectifiers by KOME deliver reliable rectification, strong voltage handling, and durable construction. They are ideal for power supplies, chargers, and general-purpose electronic applications.

FAQs – 1N4004 Rectifiers

Q1. What is the maximum voltage rating of 1N4004?
It supports up to 400V peak reverse voltage.

Q2. What current rating does this diode support?
It supports up to 1A average forward current.

Q3. Is it suitable for power supply applications?
Yes, it is commonly used in AC-to-DC rectification.

Q4. What mounting type does it use?
It uses through-hole axial mounting.

Q5. Where can I purchase this diode?
It is available from authorized electronic distributors.