Introduction to K7805-500R3 Isolated DC/DC Converters – Through Hole by EVISUN

The Isolated DC/DC Converters - Through Hole K7805-500R3 by EVISUN are compact and efficient power solutions designed to provide stable voltage regulation with electrical isolation. These converters are widely used in industrial electronics, automation systems, and embedded applications where safety and reliability are critical.

Belonging to the Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole category, the K7805-500R3 offers easy PCB integration and dependable performance. These converters are available through trusted distributors like www.xonelec.com.

Technical Specifications of K7805-500R3 DC/DC Converter

• Manufacturer: EVISUN

• Part Number: K7805-500R3

• Output Voltage: 5 V DC

• Output Current: 500 mA

• Input Voltage Range: Wide input range

• Isolation Voltage: High isolation rating

• Mounting Type: Through Hole

• Application Category: Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole

These specifications make the K7805-500R3 a reliable choice for Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole applications.

Key Features of K7805-500R3 by EVISUN

• High Efficiency Power Conversion

• Electrical Isolation for Enhanced Safety

• Compact Through-Hole Package

• Low Ripple and Noise Output

• Reliable Thermal Performance

These features highlight why EVISUN products are trusted in Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole designs.

Applications of K7805-500R3 Isolated DC/DC Converters

K7805-500R3 Isolated DC/DC Converters are commonly used in:

• Industrial Control Systems

• Embedded Electronics

• Automation Equipment

• Instrumentation Devices

• Communication Systems

Across these applications, Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole ensure stable and protected power delivery.

Circuit Integration and Mounting Overview

Typical implementation of the K7805-500R3 includes:

• Direct PCB mounting using through-hole pins

• Minimal external components required

• Improved system isolation and noise reduction

This simplicity makes the device ideal for Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole based designs.

Use Case Scenario: Industrial Control Power Isolation

Scenario: An industrial controller required isolated 5V power for sensitive logic circuits.

Challenge: Noise and ground loop issues affected system reliability.

Solution: Integration of the K7805-500R3 Isolated DC/DC Converter by EVISUN.

Result: Stable output voltage, reduced interference, and improved system safety.

This demonstrates the effectiveness of Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole in industrial environments.

Datasheet and Technical Documentation

The official EVISUN datasheet provides complete electrical characteristics, isolation ratings, and recommended operating conditions for K7805-500R3.

Datasheet access is available through XON Electronics product listings.

Why Buy K7805-500R3 from XON Electronics?

Sourcing from x-on electronics ensures:

• Genuine EVISUN Components

• Competitive Pricing

• Global Shipping Options

• Secure Online Ordering

• Professional Customer Support

Order confidently from xon electronics for authentic Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole products.

FAQs – K7805-500R3 Isolated DC/DC Converters by EVISUN

Q1. What is the output voltage of K7805-500R3?
It provides a regulated 5V DC output.

Q2. Is electrical isolation included?
Yes, the converter offers built-in isolation.

Q3. Is it suitable for industrial use?
Yes, it is designed for industrial and embedded systems.

Q4. What mounting type does it use?
It features a through-hole mounting design.

Q5. Where can I buy K7805-500R3 online?
It is available at www.xonelec.com with worldwide shipping.

Conclusion

The K7805-500R3 Isolated DC/DC Converters - Through Hole by EVISUN deliver efficient power conversion, electrical isolation, and reliable performance. As a proven solution within Power, DC/DC Converters, Isolated Converters, Isolated DC/DC Converters - Through Hole, they are ideal for industrial, automation, and embedded applications. Now available through XON Electronics.

350690-1 Pin & Socket Connectors by TE Connectivity – Reliable Interconnect Solutions

The 350690-1 model from TE Connectivity is part of their high-quality Pin & Socket Connectors range, designed for secure and stable electrical connections in industrial and electronic systems. These Connectors are widely used in control systems, appliances, and PCB assemblies where durability and precision are essential. Engineers sourcing components from www.xonelec.com, also known as X-ON Electronics or Xon Electronics, prefer TE Connectivity products for long-term reliability.

Technical Specifications of 350690-1

Electrical & Mechanical Details

• Manufacturer: TE Connectivity

• Part Number: 350690-1

• Product Type: Pin & Socket Connectors

• Contact Type: Socket (Receptacle)

• Mounting Style: Cable / Wire Mount

• Termination Method: Crimp

Performance Characteristics

• Rated for Reliable Signal Transmission

• High Contact Retention Strength

• Designed for Repeated Mating Cycles

These Connectors are manufactured to meet strict quality standards, ensuring consistent performance in demanding environments.

Key Features of 350690-1 Pin & Socket Connectors

Design Advantages

• Precision-Formed Contacts – Ensures low contact resistance

• Secure Locking Fit – Reduces accidental disconnection

• Compact Form Factor – Suitable for space-constrained assemblies

Reliability Benefits

• Durable Plating Finish – Improves corrosion resistance

• High Mechanical Stability – Supports long service life

• Compatible with Standard Crimp Tools – Simplifies installation

These features make the 350690-1 one of the most trusted Pin & Socket Connectors for professional wiring applications.

Applications of 350690-1 Connectors

Common Use Areas

• Industrial Control Panels

• Consumer Appliances

• Power Distribution Modules

• Automotive Subsystems

• Communication Equipment

In all these cases, dependable Connectors are critical for maintaining stable electrical paths, which is why the 350690-1 is frequently selected by design engineers.

Wiring and Installation Overview

Typical Crimp Connection Process

• Strip the wire insulation to recommended length

• Insert conductor into socket barrel

• Crimp using approved TE Connectivity crimp tool

• Insert terminal into compatible housing until locked

Proper crimping ensures maximum electrical conductivity and mechanical strength for Pin & Socket Connectors.

Use Case Scenario: Control Panel Harness Assembly

Project Requirement

A panel builder needed compact and reliable Connectors for sensor wiring inside industrial cabinets.

Challenges

Previous connectors suffered from vibration-related loosening and inconsistent contact pressure.

Implemented Solution

The 350690-1 Pin & Socket Connectors were selected for their strong retention force and stable mating.

Result

• Reduced wiring failures

• Faster harness assembly

• Improved long-term system reliability

This demonstrates why TE Connectivity remains a preferred supplier for mission-critical interconnect solutions.

Download Datasheet for 350690-1

For complete electrical ratings, mechanical drawings, and material specifications, refer to the official manufacturer datasheet. 

Download Datasheet for 350690-1

Why Buy from Xon Electronics?

Customer Advantages

• 100% Genuine TE Connectivity Components

• Wide Stock Availability

• Support for Bulk and OEM Orders

• Technical Assistance for Product Matching

You can source original Connectors and Pin & Socket Connectors from www.xonelec.com, also known as X-ON Electronics and Xon Electronics.

Conclusion

The 350690-1 from TE Connectivity is a dependable solution for secure wire-to-wire and wire-to-board connections. With strong mechanical retention, excellent electrical performance, and compatibility with standard crimp tools, these Pin & Socket Connectors are ideal for industrial, automotive, and electronic systems requiring stable and long-lasting interconnects.

FAQs – 350690-1 Pin & Socket Connectors

What type of connector is 350690-1?

It is a socket-type terminal used in Pin & Socket Connectors systems for crimped wire connections.

Is this connector suitable for industrial applications?

Yes, it is designed for reliable performance in vibration-prone and continuous-use environments.

Does it require special tools for crimping?

Standard TE Connectivity-approved crimp tools are recommended for best results.

Can it be used in automotive wiring?

Yes, it is commonly used in automotive and transport electrical harnesses.

Where can I purchase this connector?

It is available through authorized distributors including Xon Electronics.

Introduction to CY7C1009D-10VXI SRAM by Infineon

The SRAM CY7C1009D-10VXI by Infineon is a high-performance static random-access memory device designed notice high-speed data storage and retrieval in embedded and industrial applications. Known for its reliability and low power consumption, this SRAM is widely used in systems that demand fast and consistent memory access.

As part of the Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM category, the CY7C1009D-10VXI delivers excellent performance across a wide range of operating conditions. It is available globally through trusted distributors like www.xonelec.com.

Technical Specifications of CY7C1009D-10VXI SRAM

• Manufacturer: Infineon

• Part Number: CY7C1009D-10VXI

• Memory Type: Static RAM (SRAM)

• Organization: 128K x 8

• Access Time: 10 ns

• Supply Voltage: 3.3 V

• Package Type: TSOP

• Application Category: Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM

These specifications make the device ideal for performance-critical Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM applications.

Key Features of CY7C1009D-10VXI by Infineon

• Fast Access Time for High-Speed Processing

• Low Standby Power Consumption

• CMOS Technology for Enhanced Reliability

• Fully Static Operation

• Industry-Standard Pin Configuration

These features highlight why CY7C1009D-10VXI is a trusted solution within Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM systems.

Applications of CY7C1009D-10VXI SRAM

The CY7C1009D-10VXI SRAM by Infineon is widely used in:

• Industrial Control Systems

• Networking Equipment

• Embedded Computing Platforms

• Medical Electronics

• Data Acquisition Systems

In all these environments, Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM play a vital role in maintaining speed and reliability.

Memory Interface and Operation Overview

The CY7C1009D-10VXI supports straightforward memory interfacing:

• Direct CPU or microcontroller connection

• Fast read/write cycles without refresh

• Stable performance under continuous operation

This simple integration makes it ideal for Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM based designs.

Use Case Scenario: Embedded System Performance Enhancement

Scenario: An embedded controller required fast memory for real-time data processing.

Challenge: Slower memory caused system latency.

Solution: Implementation of CY7C1009D-10VXI SRAM by Infineon.

Result: Improved processing speed, stable operation, and reduced system delays.

This demonstrates the effectiveness of Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM in time-critical applications.

Datasheet and Technical Documentation

The official Infineon datasheet provides detailed electrical characteristics, timing diagrams, and application notes for CY7C1009D-10VXI.

Datasheet access is available through XON Electronics product pages.

Why Buy CY7C1009D-10VXI from XON Electronics?

Sourcing from x-on electronics offers:

• Genuine Infineon Components

• Competitive Global Pricing

• Worldwide Shipping Support

• Secure Online Ordering

• Expert Technical Assistance

Order confidently from xon electronics for authentic Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM solutions.

FAQs – CY7C1009D-10VXI SRAM by Infineon

Q1. What type of memory is CY7C1009D-10VXI?
It is a high-speed static random-access memory (SRAM).

Q2. Does this SRAM require refresh cycles?
No, it operates fully statically without refresh.

Q3. Is it suitable for industrial applications?
Yes, it is designed for industrial-grade reliability.

Q4. What voltage does it operate at?
It typically operates at 3.3 V.

Q5. Where can I buy CY7C1009D-10VXI online?
It is available at www.xonelec.com with worldwide delivery.

Conclusion

The CY7C1009D-10VXI SRAM by Infineon offers high speed, low power consumption, and reliable performance for demanding electronic designs. As a proven solution within Semiconductors, Integrated Circuits - ICs, Memory ICs, SRAM, it is ideal for industrial, embedded, and networking applications. Now available through XON Electronics.

Introduction to MKU 1 SW Test Plugs & Test Jacks by Hirschmann

The Test Plugs & Test Jacks MKU 1 SW by Hirschmann are high-quality accessories designed for safe, accurate, and repeatable electrical measurements. Widely trusted in laboratories, industrial environments, and educational facilities, these components provide reliable signal access during testing and diagnostics.

As part of the Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks category, the MKU 1 SW series ensures excellent electrical contact, mechanical durability, and operator safety. Genuine Hirschmann test accessories are available from www.xonelec.com.

Technical Specifications of MKU 1 SW Test Plugs & Test Jacks

• Manufacturer: Hirschmann

• Part Number: MKU 1 SW

• Product Type: Test Plug and Test Jack

• Contact Material: High-conductivity metal

• Insulation: Safety-rated insulating body

• Mounting Type: Panel / Test bench compatible

• Application Category: Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks

These specifications make MKU 1 SW a dependable solution within Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks applications.

Key Features of MKU 1 SW by Hirschmann

• Stable and Secure Electrical Connection

• High Safety Standard for Professional Testing

• Long Mechanical Life for Repeated Insertions

• Easy Handling and Quick Connections

• Reliable Signal Transmission

These advantages make MKU 1 SW a preferred choice in Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks used worldwide.

Applications of MKU 1 SW Test Plugs & Test Jacks

MKU 1 SW Test Plugs & Test Jacks by Hirschmann are commonly used in:

• Laboratory Test Benches

• Industrial Equipment Diagnostics

• Electrical Measurement Systems

• Training and Educational Labs

• R&D and Prototype Testing

Across these environments, Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks ensure precision and safety.

Connection and Usage Overview

Typical usage of MKU 1 SW includes:

• Inserting the test plug into a compatible test jack

• Connecting measurement instruments securely

• Performing voltage, current, or signal tests

This simple workflow highlights the practicality of Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks in daily operations.

Use Case Scenario: Laboratory Measurement Accuracy

Scenario: A testing laboratory required dependable connectors for repeated measurements.

Challenge: Inconsistent readings due to low-quality test accessories.

Solution: Adoption of MKU 1 SW Test Plugs & Test Jacks by Hirschmann.

Result: Improved accuracy, safer testing procedures, and reduced maintenance issues.

This demonstrates why Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks from Hirschmann are trusted by professionals.

Datasheet and Technical Documentation

Detailed specifications, dimensions, and safety ratings for MKU 1 SW are available in the official Hirschmann documentation.

Datasheet access available through XON Electronics product listings.

Why Buy MKU 1 SW from XON Electronics?

Purchasing from x-on electronics ensures:

• Authentic Hirschmann Components

• Competitive Pricing

• Global Shipping Support

• Secure Online Ordering

• Expert Customer Assistance

Order confidently from xon electronics for reliable Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks.

FAQs – MKU 1 SW Test Plugs & Test Jacks by Hirschmann

Q1. What is MKU 1 SW used for?
It is used for safe and accurate electrical testing and measurements.

Q2. Are these suitable for industrial use?
Yes, they are designed for laboratory and industrial environments.

Q3. Can they handle repeated connections?
Yes, they are built for long-term, repeated usage.

Q4. Are they compatible with standard test equipment?
Yes, MKU 1 SW supports standard test setups.

Q5. Where can I buy MKU 1 SW online?
They are available at www.xonelec.com with worldwide shipping.

Conclusion

The MKU 1 SW Test Plugs & Test Jacks by Hirschmann deliver safety, durability, and measurement accuracy across professional testing environments. As a reliable solution within Test & Measurement, Test Equipment Accessories, Test Plugs & Test Jacks, they are ideal for laboratories, industrial diagnostics, and R&D applications. Available now through XON Electronics.

39-01-2080 Headers & Wire Housings by Molex

The Headers & Wire Housings 39-01-2080 by Molex are reliable interconnect solutions designed for secure wire-to-board connections in electronic assemblies. Known for precision engineering and durability, this component is widely used in consumer electronics, industrial controls, and power distribution systems.

This product falls under Connectors and is categorized as Headers & Wire Housings, making it an essential part for designers who need dependable signal and power connectivity.

Technical Overview of 39-01-2080 Connector

General Specifications

• Manufacturer: Molex

• Part Number: 39-01-2080

• Product Type: Headers & Wire Housings

• Category: Connectors

• Circuit Count: 8 Circuits

• Termination Type: Crimp

• Housing Material: High-grade thermoplastic

Design & Durability

• Secure locking mechanism

• Heat-resistant housing

• Long mating cycle life

These features make 39-01-2080 Headers & Wire Housings suitable for long-term and high-reliability applications.

Key Features of Molex Headers & Wire Housings

Strong Electrical Performance

• Stable contact retention

• Low contact resistance

• Reliable current handling

High-quality Connectors like these ensure consistent electrical performance in demanding environments.

Mechanical Reliability

• Firm wire retention

• Vibration resistance

• Precise terminal alignment

As dependable Headers & Wire Housings, they reduce the risk of accidental disconnections.

Applications of 39-01-2080 Headers & Wire Housings

Consumer Electronics

• Power adapters

• Home appliances

• Battery charging systems

Such devices depend on compact and reliable Connectors for safe operation.

Industrial & Automation Systems

• Control panels

• Sensor interfaces

• Embedded controllers

The 39-01-2080 performs well in environments that require rugged Headers & Wire Housings.

Advantages for Engineers and Manufacturers

Easy Assembly

• Compatible with standard crimp tools

• Fast wire termination

• Reduced assembly errors

This improves productivity when working with Connectors in mass production.

Long-Term Reliability

• Maintains contact integrity

• Resistant to mechanical stress

• Suitable for continuous operation

These advantages make Headers & Wire Housings from Molex a trusted choice worldwide.

Why Choose Molex Connectors

Global Industry Standard

• Trusted brand in electronics

• High manufacturing quality

• Consistent performance across batches

Molex is a leader in Connectors and interconnect solutions for all industries.

Wide Compatibility

• Works with multiple terminal types

• Flexible design for different layouts

• Supports various wire gauges

This flexibility is why engineers prefer Molex Headers & Wire Housings in diverse projects.

Download Datasheet – 39-01-2080

The datasheet provides:

• Electrical ratings

• Mechanical dimensions

• Terminal compatibility

• Assembly instructions

       Download Datasheet – 39-01-2080

Buy 39-01-2080 Headers & Wire Housings at XON

Why Buy from XON Electronics

• 100% original Molex parts

• Fast global shipping

• Competitive pricing

• Expert customer support

Get your 39-01-2080 Headers & Wire Housings by Molex today 
Buy Online at XON Electronics

Conclusion

The 39-01-2080 Headers & Wire Housings by Molex deliver strong electrical performance, mechanical stability, and easy assembly for modern electronic designs. If your project requires durable Connectors and dependable Headers & Wire Housings, this part is an excellent choice.

FAQs – 39-01-2080 Headers & Wire Housings by Molex

What type of connector is 39-01-2080?

It is a wire housing used with crimp terminals for wire-to-board connections.

Is this connector suitable for industrial use?

Yes, it is designed for both consumer and industrial electronics.

How many circuits does it support?

The 39-01-2080 supports 8 circuits.

Can I use standard Molex terminals with it?

Yes, it is compatible with approved Molex crimp terminals.

Where can I buy original Molex 39-01-2080?

You can buy it online from XON Electronics with worldwide delivery.

Introduction to M39029/58-363 Circular MIL Spec Connectors by Amphenol

The Circular MIL Spec Connectors M39029/58-363 by Amphenol are high-reliability connectors designed to meet stringent military and aerospace standards. Engineered for durability, signal integrity, and environmental resistance, these connectors are ideal for mission-critical applications where performance cannot be compromised.

As part of the Connectors, Circular Connectors, Circular MIL Spec Connectors category, the M39029/58-363 ensures secure mating, excellent electrical continuity, and long service life. Genuine Amphenol connectors are available from www.xonelec.com.

Technical Specifications of M39029/58-363

• Manufacturer: Amphenol

• Part Number: M39029/58-363

• Product Type: Circular MIL Spec Connector

• Connector Style: Circular

• Contact Type: Pin / Socket (as per configuration)

• Termination Method: Crimp

• Shell Material: Metal, corrosion-resistant finish

• Environmental Sealing: Yes

• Compliance: MIL-DTL standards

• Category: Connectors, Circular Connectors, Circular MIL Spec Connectors

These specifications make the M39029/58-363 a trusted solution within Connectors, Circular Connectors, Circular MIL Spec Connectors for harsh environments.

Key Features of M39029/58-363 Connectors

• Meets Military and Aerospace Standards

• Secure Locking Mechanism for Vibration Resistance

• Excellent EMI/RFI Shielding

• High Durability in Extreme Environments

• Reliable Electrical Performance

With these features, the M39029/58-363 stands out among Connectors, Circular Connectors, Circular MIL Spec Connectors used in defense and aerospace systems.

Applications of M39029/58-363

The M39029/58-363 Circular MIL Spec Connectors by Amphenol are widely used in:

• Aerospace and Avionics Systems

• Military Communication Equipment

• Radar and Navigation Systems

• Industrial Automation in Harsh Environments

• Defense Vehicles and Ground Support Equipment

Across these applications, Connectors, Circular Connectors, Circular MIL Spec Connectors ensure reliable connectivity under extreme conditions.

Wiring and Connection Overview

Typical installation of the M39029/58-363 includes:

• Crimping contacts onto wires using approved tools

• Inserting contacts into the connector housing

• Mating the connector with secure coupling

This process ensures optimal performance of Connectors, Circular Connectors, Circular MIL Spec Connectors in demanding installations.

Use Case Scenario: Aerospace Avionics Integration

Scenario: An aerospace OEM required connectors capable of withstanding vibration and temperature extremes.

Problem: Commercial connectors failed under flight conditions.

Solution: Engineers selected M39029/58-363 Circular MIL Spec Connectors by Amphenol.

Result: Improved system reliability, reduced maintenance, and enhanced flight safety.

This example highlights the importance of certified Connectors, Circular Connectors, Circular MIL Spec Connectors in aerospace systems.

Download Datasheet for M39029/58-363

For detailed electrical characteristics, mechanical dimensions, and compliance information, refer to the official Amphenol datasheet.

Datasheet available from XON Electronics

Why Buy from XON Electronics?

Purchasing from x-on electronics ensures:

• 100% Genuine Amphenol Products

• Competitive Pricing and Bulk Availability

• Worldwide Shipping Options

• Secure Online Ordering

• Professional Customer Support

Order confidently from xon electronics and source premium Connectors, Circular Connectors, Circular MIL Spec Connectors globally.

FAQs – M39029/58-363 Circular MIL Spec Connectors

Q1. Are these connectors suitable for military applications?
Yes, they meet MIL-DTL specifications.

Q2. Do they provide environmental sealing?
Yes, they are designed for harsh environmental conditions.

Q3. Are crimp contacts required?
Yes, crimp termination ensures secure electrical connections.

Q4. Can they handle vibration and shock?
Absolutely, they are built for high-vibration environments.

Q5. Where can I buy M39029/58-363 online?
You can purchase them from www.xonelec.com with global delivery.

Conclusion

The M39029/58-363 Circular MIL Spec Connectors by Amphenol deliver rugged construction, certified performance, and dependable connectivity. As a trusted solution within Connectors, Circular Connectors, Circular MIL Spec Connectors, they are ideal for aerospace, military, and industrial applications. Available now from XON Electronics worldwide.

HTLP3050-10 Standoffs & Spacers by Huco

The Standoffs & Spacers HTLP3050-10 by Huco are precision-engineered hardware components designed to provide reliable spacing, insulation, and mechanical support in electronic and industrial assemblies. These components are essential for maintaining proper clearance between PCBs and mounting surfaces, improving safety and airflow within enclosures.

This product belongs to the Electromechanical category and is classified under Hardware and Standoffs & Spacers, making it suitable for professional electronics, automation equipment, and control panels.

Technical Overview of HTLP3050-10 Standoff

General Specifications

• Manufacturer: Huco

• Part Number: HTLP3050-10

• Product Type: Standoffs & Spacers

• Category: Electromechanical, Hardware

• Material: High-strength insulating polymer

• Mounting Type: Threaded / press-fit compatible

• Length: Optimized for PCB spacing requirements

Build and Durability

• High mechanical strength

• Excellent electrical insulation

• Resistant to vibration and wear

These features make HTLP3050-10 Standoffs & Spacers ideal for long-term use in demanding environments.

Key Features of Huco Standoffs & Spacers

Mechanical Stability

• Maintains precise board alignment

• Reduces mechanical stress on PCBs

• Improves assembly rigidity

As reliable Standoffs & Spacers, these components enhance structural integrity inside electronic enclosures.

Electrical Safety

• Prevents short circuits

• Provides safe board separation

• Supports high-voltage insulation needs

This makes them highly suitable for Electromechanical assemblies requiring safe spacing.

Applications of HTLP3050-10 Standoffs & Spacers

Electronic Control Systems

• Industrial controllers

• PLC enclosures

• Power distribution panels

Such systems depend on quality Hardware and Standoffs & Spacers to ensure safe PCB mounting.

Automation and Instrumentation

• Measurement equipment

• Embedded electronics

• Sensor housings

The HTLP3050-10 supports reliable component placement in compact designs.

Advantages for Designers and Assemblers

Easy Installation

• Compatible with standard mounting holes

• Fast assembly during production

• Simple replacement during maintenance

These benefits make Standoffs & Spacers essential for efficient manufacturing processes.

Long-Term Reliability

• Maintains spacing over time

• Resistant to environmental stress

• Stable under continuous vibration

Such reliability is critical for Electromechanical and industrial applications.

Why Choose Huco Hardware Components

Precision Manufacturing

• Consistent dimensional accuracy

• High-quality material selection

• Trusted industrial performance

Huco is known for dependable Hardware and mechanical components for electronics.

Wide Industry Acceptance

• Used in automation systems

• Popular in industrial electronics

• Proven performance in field installations

This ensures confidence when selecting Standoffs & Spacers for professional projects.

Download Datasheet – HTLP3050-10

The datasheet includes:

• Mechanical dimensions

• Material specifications

• Mounting instructions

• Environmental ratings

      Download Datasheet – HTLP3050-10

Buy HTLP3050-10 Standoffs & Spacers at XON

Why Buy from XON Electronics

• Genuine Huco products

• Fast worldwide shipping

• Competitive pricing

• Dedicated technical support

Order your HTLP3050-10 Standoffs & Spacers by Huco today from https://www.xonelec.com/ (XON Electronics)

Conclusion

The HTLP3050-10 Standoffs & Spacers by Huco offer strong mechanical support, excellent insulation, and precise spacing for electronic assemblies. For projects requiring reliable Hardware in Electromechanical systems, these Standoffs & Spacers provide long-lasting performance and easy integration.

FAQs – HTLP3050-10 Standoffs & Spacers by Huco

What is the purpose of HTLP3050-10 standoffs?

They provide safe spacing and mechanical support between PCBs and mounting surfaces.

Are these standoffs electrically insulating?

Yes, they are made from insulating material to prevent short circuits.

Can they be used in industrial environments?

Yes, they are suitable for industrial automation and control systems.

Are they compatible with standard PCB mounting holes?

Yes, they fit common PCB mounting configurations.

Where can I buy original Huco standoffs?

You can purchase genuine Huco products from XON Electronics.

Introduction to M22759/34-20-9 Hook-up Wire by TE Connectivity

The Hook-up Wire M22759/34-20-9 by TE Connectivity is a high-performance, military-spec wire engineered for reliable signal and power transmission in harsh environments. Known for its durability, thermal stability, and electrical integrity, this hook-up wire is widely used in aerospace, defense, and industrial electronics.

Belonging to the Wire & Cable, Hook-up Wire category, the M22759/34-20-9 ensures consistent performance under extreme conditions. Genuine TE Connectivity products are available from www.xonelec.com.

Technical Specifications of M22759/34-20-9

• Manufacturer: TE Connectivity

• Part Number: M22759/34-20-9

• Product Type: Hook-up Wire

• Wire Gauge: 20 AWG

• Conductor Material: Silver-Plated Copper

• Insulation Material: ETFE (Ethylene Tetrafluoroethylene)

• Voltage Rating: Military specification compliant

• Temperature Rating: High-temperature resistant

• Category: Wire & Cable, Hook-up Wire

These specifications make M22759/34-20-9 a trusted solution within Wire & Cable, Hook-up Wire applications.

Key Features of M22759/34-20-9 Hook-up Wire

• Excellent Thermal and Chemical Resistance

• High Electrical Conductivity with Low Signal Loss

• Lightweight and Flexible Construction

• Resistant to Abrasion and Mechanical Stress

• Meets Military and Aerospace Standards

These features position it as a premium choice in Wire & Cable, Hook-up Wire solutions.

Applications of M22759/34-20-9

The M22759/34-20-9 Hook-up Wire by TE Connectivity is commonly used in:

• Aerospace and Defense Electronics

• Avionics and Military Wiring Harnesses

• Industrial Control Systems

• High-Reliability Electronic Assemblies

• Test and Measurement Equipment

Across these applications, Wire & Cable, Hook-up Wire ensures dependable electrical performance.

Wiring and Installation Overview

Typical installation practices include:

• Cutting wire to the required length

• Stripping insulation without damaging the conductor

• Terminating using approved crimp or solder methods

These steps ensure optimal results when working with Wire & Cable, Hook-up Wire in critical systems.

Use Case Scenario: Aerospace Avionics Wiring

Scenario: An avionics manufacturer required lightweight, heat-resistant wiring.

Problem: Conventional wires failed under high temperatures.

Solution: Engineers selected M22759/34-20-9 Hook-up Wire by TE Connectivity.

Result: Improved thermal reliability, reduced weight, and long-term performance stability.

This highlights the value of high-grade Wire & Cable, Hook-up Wire in aerospace applications.

Download Datasheet for M22759/34-20-9

For detailed electrical properties, insulation data, and compliance standards, refer to the official TE Connectivity datasheet.

Datasheet available from XON Electronics

Why Buy from XON Electronics?

Sourcing M22759/34-20-9 from x-on electronics ensures:

• 100% Genuine TE Connectivity Products

• Competitive Pricing and Bulk Availability

• Worldwide Shipping Options

• Secure Online Ordering

• Expert Customer Support

Order confidently from xon electronics and access premium Wire & Cable, Hook-up Wire globally.

FAQs – M22759/34-20-9 Hook-up Wire by TE Connectivity

Q1. Is this wire suitable for aerospace use?
Yes, it meets military and aerospace wiring standards.

Q2. What insulation material is used?
It uses ETFE insulation for high-temperature resistance.

Q3. Is it flexible enough for tight installations?
Yes, it offers excellent flexibility despite its durability.

Q4. Can it be used in industrial environments?
Absolutely, it performs reliably in harsh industrial conditions.

Q5. Where can I buy M22759/34-20-9 online?
You can purchase it from www.xonelec.com with global shipping.

Conclusion

The M22759/34-20-9 Hook-up Wire by TE Connectivity delivers exceptional electrical performance, thermal resistance, and long-term reliability. As a trusted solution within Wire & Cable, Hook-up Wire, it is ideal for aerospace, defense, and industrial electronics. Available now from XON Electronics worldwide.

Introduction to CWT-6-W122-5 Solder Sleeves & Shield Tubing by TE Connectivity

The Solder Sleeves & Shield Tubing CWT-6-W122-5 by TE Connectivity are engineered to provide reliable electrical connections, environmental sealing, and effective cable shielding in demanding applications. These components simplify wire termination by combining soldering, insulation, and strain relief into a single solution.

Designed for professional wire termination and protection, this product belongs to the Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing category and is widely used across aerospace, automotive, and industrial electronics. Genuine TE Connectivity products are available from www.xonelec.com.

Technical Specifications of CWT-6-W122-5

• Manufacturer: TE Connectivity

• Part Number: CWT-6-W122-5

• Product Type: Solder Sleeve & Shield Tubing

• Insulation Material: Heat-Shrinkable Polymer

• Solder Preform: Integrated

• Shielding: Conductive Shield Sleeve

• Operating Temperature: Wide industrial-grade range

• Environmental Protection: Moisture and vibration resistant

• Category: Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing

These specifications make the CWT-6-W122-5 ideal for high-reliability Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing applications.

Key Features of CWT-6-W122-5

• Integrated Solder and Heat-Shrink Technology

• Reliable Electrical and Mechanical Connection

• Provides EMI/RFI Shielding

• Environmental Sealing Against Moisture and Contaminants

• Reduces Assembly Time and Installation Errors

These advantages make it a preferred choice within Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing solutions.

Applications of CWT-6-W122-5

The CWT-6-W122-5 Solder Sleeves & Shield Tubing by TE Connectivity are commonly used in:

• Aerospace and Defense Wiring Systems

• Automotive Wire Harnesses

• Industrial Control Panels

• Communication and Signal Cables

• High-Reliability Electronic Assemblies

Across these applications, Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing ensure secure connections and long-term performance.

Wiring and Installation Overview

Typical installation steps include:

• Positioning the solder sleeve over the wire splice

• Applying controlled heat to activate solder flow

• Heat-shrink tubing seals and secures the joint

This process ensures consistent performance for Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing installations.

Use Case Scenario: Aerospace Cable Shielding

Scenario: An aerospace manufacturer required compact and reliable shielded splices.

Problem: Traditional soldering methods caused inconsistent joints.

Solution: Engineers selected CWT-6-W122-5 Solder Sleeves & Shield Tubing.

Result: Improved EMI shielding, reduced assembly time, and enhanced reliability.

This demonstrates the value of premium Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing in mission-critical systems.

Download Datasheet for CWT-6-W122-5

For detailed installation guidelines, material properties, and electrical performance data, refer to the official TE Connectivity datasheet.

Datasheet available from XON Electronics

Why Buy from XON Electronics?

Purchasing from x-on electronics ensures:

• 100% Genuine TE Connectivity Products

• Competitive Pricing and Bulk Availability

• Worldwide Shipping Options

• Secure Online Ordering

• Expert Customer Support

Order confidently from xon electronics and source high-quality Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing globally.

FAQs – CWT-6-W122-5 Solder Sleeves & Shield Tubing

Q1. What is the main function of CWT-6-W122-5?
It provides soldered electrical connections with insulation and shielding.

Q2. Is it suitable for aerospace applications?
Yes, it is designed for high-reliability environments including aerospace.

Q3. Does it provide EMI shielding?
Yes, the integrated shield sleeve helps reduce EMI/RFI interference.

Q4. How is it installed?
By applying controlled heat to activate solder and shrink the tubing.

Q5. Where can I buy CWT-6-W122-5 online?
You can purchase it from www.xonelec.com with global shipping.

Conclusion

The CWT-6-W122-5 Solder Sleeves & Shield Tubing by TE Connectivity offer an efficient, reliable, and compact solution for wire termination and shielding. As a trusted product within Wire & Cable, Wire & Cable Management, Solder Sleeves & Shield Tubing, it is ideal for aerospace, automotive, and industrial applications. Available now from XON Electronics worldwide.

Introduction to 36151 Terminals by TE Connectivity

The Terminals 36151 by TE Connectivity are high-quality electrical terminals designed to provide secure, reliable, and long-lasting wire connections. Manufactured with precision and engineered for performance, these terminals are widely used in industrial, automotive, and electronic applications where dependable connectivity is essential.

As part of the Connectors, Terminals category, the 36151 terminal ensures excellent electrical conductivity and strong mechanical retention. Buyers looking for genuine TE Connectivity products can confidently source them from www.xonelec.com.

Technical Specifications of 36151

• Manufacturer: TE Connectivity

• Part Number: 36151

• Product Type: Electrical Terminal

• Terminal Style: Crimp Terminal

• Contact Material: Copper Alloy

• Plating: Tin Plated (variant dependent)

• Wire Compatibility: Stranded Wire

• Termination Method: Crimp

• Operating Temperature: Industrial-grade range

• Category: Connectors, Terminals

These specifications make the 36151 a reliable solution within Connectors, Terminals for professional wiring systems.

Key Features of 36151 Terminals

• Secure Crimp Termination for Stable Connections

• Low Contact Resistance for Efficient Current Flow

• Durable Construction for Long-Term Reliability

• Easy Installation Using Standard Crimp Tools

• Designed for High-Reliability Applications

With these advantages, the 36151 stands out among Connectors, Terminals used in critical electrical environments.

Applications of 36151

The 36151 Terminals by TE Connectivity are commonly used in:

• Automotive Wiring Harnesses

• Industrial Control and Automation Panels

• Power Distribution Systems

• Consumer and Commercial Electronics

• Machinery and Equipment Wiring

Across these applications, Connectors, Terminals like the 36151 ensure consistent and safe electrical connectivity.

Wiring and Connection Overview

Typical installation of the 36151 terminal involves:

• Stripping the wire insulation to the specified length

• Crimping the terminal using an approved crimping tool

• Inserting the terminal into a connector housing or mating interface

This efficient process allows Connectors, Terminals to be seamlessly integrated into wiring assemblies.

Use Case Scenario: Industrial Control Panel Assembly

Scenario: A control panel manufacturer required reliable terminals for dense wiring layouts.

Problem: Inconsistent terminals caused loose connections and signal instability.

Solution: Engineers standardized on 36151 Terminals by TE Connectivity.

Result: Improved electrical reliability, reduced maintenance, and enhanced system performance.

This use case highlights the importance of premium Connectors, Terminals in industrial applications.

Download Datasheet for 36151

For detailed electrical characteristics, material specifications, and crimping recommendations, refer to the official TE Connectivity datasheet.

Datasheet available from XON Electronics

Why Buy from XON Electronics?

Sourcing 36151 terminals from x-on electronics ensures:

• 100% Genuine TE Connectivity Products

• Competitive Pricing and Bulk Stock Availability

• Worldwide Shipping Options

• Secure Online Ordering

• Dedicated Customer Support

Order confidently from xon electronics and source premium Connectors, Terminals globally.

FAQs – 36151 Terminals by TE Connectivity

Q1. What type of termination does the 36151 use?
It uses crimp termination for secure and reliable wire connections.

Q2. Is this terminal suitable for automotive applications?
Yes, it is commonly used in automotive wiring harnesses.

Q3. Does it support stranded wires?
Yes, it is designed specifically for stranded wire termination.

Q4. Can it be used in industrial environments?
Yes, it is built to withstand industrial operating conditions.

Q5. Where can I buy 36151 terminals online?
You can purchase them from www.xonelec.com with worldwide delivery.

Conclusion

The 36151 Terminals by TE Connectivity provide secure crimp connections, durable construction, and dependable electrical performance. As a trusted solution within Connectors, Terminals, they are ideal for automotive, industrial, and electronic applications. Available now from XON Electronics with global shipping.