TIP2955 Bipolar Transistors - BJT by JSMSEMI – Reliable High-Power Switching Solution

The Bipolar Transistors - BJT TIP2955 by JSMSEMI are designed for high-current and high-power applications where dependable amplification and switching are critical. These components are widely used in power supplies, audio amplifiers, motor control circuits, and industrial electronics. As robust Semiconductors, these devices are part of the trusted Discrete Semiconductors family, delivering stable performance across demanding environments.
Explore trusted sourcing at https://www.xonelec.com/.

Technical Specifications of TIP2955

• Manufacturer: JSMSEMI

• Part Number: TIP2955

• Product Type: Bipolar Transistors - BJT

• Polarity: PNP

• Collector-Emitter Voltage (Vce): 60V

• Collector Current (Ic): 15A

• Power Dissipation: Up to 90W

• Package Type: TO-247 / TO-218 (variant dependent)

• Category: Semiconductors, Discrete Semiconductors, Transistors

These Bipolar Transistors - BJT are optimized for high-current handling and reliable thermal performance.

Key Features of TIP2955

• High current handling for power electronics

• Rugged design suitable for industrial use

• Excellent thermal stability under load

• Proven performance as Bipolar Transistors - BJT

• Reliable switching and amplification characteristics

As durable Transistors, the TIP2955 series supports long operational life in high-power circuits.

Applications of TIP2955

• Linear and switching power supplies

• Audio power amplifier stages

• Motor driver circuits

• Voltage regulation systems

• Industrial control electronics

These applications highlight why Semiconductors like TIP2955 remain essential within modern Discrete Semiconductors design.

Wiring and Connection Overview

The TIP2955 is typically mounted on a heatsink for optimal performance:

[Base] ? Control Signal
[Collector] ? Load Connection
[Emitter] ? Supply Rail

Proper thermal management ensures reliable operation of these Bipolar Transistors - BJT under continuous load.

Use Case Scenario: High-Current Audio Amplifier

An audio equipment manufacturer required high-power Transistors capable of handling sustained current without distortion.

Problem: Existing components overheated under peak load.
Solution: The TIP2955 Bipolar Transistors - BJT by JSMSEMI provided improved current capacity and thermal stability.
Result: Enhanced sound clarity, reduced failures, and longer system lifespan.

Download Datasheet for TIP2955

For complete electrical characteristics, pin configuration, and thermal specifications:

 Download TIP2955 Datasheet from XON Electronics 

Why Buy from X-On Electronics?

X-On Electronics (https://www.xonelec.com/) offers genuine Semiconductors and Discrete Semiconductors with:

• Authentic JSMSEMI components

• Global shipping to USA, India, Australia, Europe & other countries

• Competitive pricing for bulk orders

• Secure online purchasing

• Expert technical assistance

Your trusted source for Bipolar Transistors - BJT worldwide.

Conclusion

The TIP2955 Bipolar Transistors - BJT by JSMSEMI are a proven solution for high-power amplification and switching needs. With strong electrical performance, rugged construction, and reliable heat handling, these Transistors remain a preferred choice for engineers designing demanding power circuits.

FAQs – TIP2955 Bipolar Transistors - BJT

Q1. What type of transistor is TIP2955?
It is a PNP Bipolar Transistor - BJT designed for high-current applications.

Q2. What is the maximum collector current of TIP2955?
The TIP2955 supports up to 15A collector current.

Q3. Is TIP2955 suitable for audio amplifiers?
Yes, it is commonly used in high-power audio amplifier output stages.

Q4. Does TIP2955 require a heatsink?
Yes, a heatsink is recommended for optimal thermal performance.

Q5. Where can I buy TIP2955 online?
You can purchase it globally from www.xonelec.com.

MJL1302AG-JSM Bipolar Transistors – BJT by JSMSEMI – High-Performance Complement for Power Amplifiers

The Bipolar Transistors – BJT MJL1302AG-JSM by JSMSEMI are engineered for superior performance in high-current audio and power circuits. Designed as a PNP complement to high-power NPN BJTs, this device provides exceptional linearity, high current capability, and low distortion, making it ideal for professional audio equipment, industrial machinery, and power regulation systems.

Recognized across bold Semiconductors, bold Discrete Semiconductors, bold Transistors, and advanced bold Bipolar Transistors – BJT by JSMSEMI, it ensures stable and efficient operation even under demanding conditions.

Technical Specifications of MJL1302AG-JSM

• Manufacturer: JSMSEMI

• Part Number: MJL1302AG-JSM

• Type: Bipolar Transistors – BJT by JSMSEMI

• Category: PNP Power Transistor

• Collector-Emitter Voltage (VCEO): 260V

• Collector Current (IC): 15A

• Power Dissipation: 200W

• Gain Bandwidth: High-frequency optimized

• Package: TO-264

• Operating Temperature: –55°C to +150°C

• Categories: bold Semiconductors, bold Discrete Semiconductors, bold Transistors, bold Bipolar Transistors – BJT by JSMSEMI

• DataSheetUrl

Key Features of MJL1302AG-JSM

• High-power dissipation for demanding circuits

• Low distortion and excellent linearity

• Robust PNP architecture for complementary pairing

• Rugged TO-264 package ensures superior thermal performance

• Stable gain across operating temperatures

• Suitable for high-power audio and industrial switching

• RoHS-compliant and designed for long service life

These strengths make it a premium choice among bold Bipolar Transistors – BJT by JSMSEMI.

Applications of MJL1302AG-JSM

Ideal for:

• High-fidelity stereo and professional audio amplifiers

• High-current switching and control circuits

• Industrial motor drivers

• Power supply regulation

• Inverter and converter stages

• Push-pull amplifier designs

• Precision signal amplification

Its dependable structure ensures long-term usage across bold Semiconductors and bold Discrete Semiconductors.

Wiring & Connection Overview

• Mount with an appropriate heatsink to manage thermal output

• Follow correct PNP pin configuration: Base, Collector, Emitter

• Use insulating pads when required for heatsink isolation

• Apply thermal grease for optimal heat dissipation

• Ensure sufficient PCB copper area for current paths

Proper installation enhances stability for bold Transistors and bold Bipolar Transistors – BJT by JSMSEMI circuits.

Use Case Scenario: High-End Push-Pull Audio Amplifier

Scenario: A high-end amplifier manufacturer needed a matching PNP transistor for its push-pull stage.
Problem: Existing components produced distortion at high currents.
Solution: The MJL1302AG-JSM Bipolar Transistors – BJT by JSMSEMI offered low distortion and superior current handling.
Result: Better sound clarity, improved thermal performance, and higher amplifier efficiency.

This showcases its value in precision audio and high-current bold Transistors applications.

Why Buy from Xon Electronics?

Xon Electronics supplies authentic bold Bipolar Transistors – BJT by JSMSEMI and a full range of bold Semiconductors and bold Discrete Semiconductors, offering:

• Guaranteed original components

• Worldwide fast shipping

• Bulk discounts for OEMs

• Professional sourcing support

• Secure and hassle-free ordering

Purchase now at www.xonelec.com.

Conclusion

The MJL1302AG-JSM Bipolar Transistors – BJT by JSMSEMI deliver exceptional performance in high-power audio, control systems, and industrial circuits. As a reliable member of bold Semiconductors, bold Discrete Semiconductors, and bold Transistors, this device ensures stable and efficient operation in advanced electronics.

FAQs – MJL1302AG-JSM

Q1. What type of transistor is MJL1302AG-JSM?
It is a PNP bold Bipolar Transistors – BJT by JSMSEMI.

Q2. What applications suit this transistor best?
High-end audio amplifiers, power circuits, and industrial switching.

Q3. What is its current capability?
Up to 15A.

Q4. Which product categories does it fall under?
bold Semiconductors, bold Discrete Semiconductors, bold Transistors, and bold Bipolar Transistors – BJT by JSMSEMI.

Q5. Where can I buy it?
Available at www.xonelec.com globally.

MJL3281AG-JSM Bipolar Transistors – BJT by JSMSEMI – High-Power, High-Fidelity Performance

The Bipolar Transistors – BJT MJL3281AG-JSM by JSMSEMI are designed for superior performance in high-power and audio-frequency applications. Known for their exceptional linearity, high current capacity, and low distortion characteristics, these BJTs are ideal for demanding amplifier circuits and power electronics.

As dependable components in bold Semiconductors, bold Discrete Semiconductors, bold Transistors, and advanced bold Bipolar Transistors – BJT by JSMSEMI, they deliver excellent efficiency, reliability, and thermal stability.

Technical Specifications of MJL3281AG-JSM

• Manufacturer: JSMSEMI

• Part Number: MJL3281AG-JSM

• Type: Bipolar Transistors – BJT by JSMSEMI

• Category: NPN Power Transistor

• Collector-Emitter Voltage (VCEO): 260V

• Collector Current (IC): 15A

• Power Dissipation: 200W

• Gain Bandwidth Product: High-frequency optimized

• Package: TO-264

• Operating Temperature Range: –55°C to +150°C

• Categories: bold Semiconductors, bold Discrete Semiconductors, bold Transistors, bold Bipolar Transistors – BJT by JSMSEMI

• DataSheetUrl 

Key Features of MJL3281AG-JSM

• High-power dissipation capability

• Excellent linearity for high-fidelity audio

• Low distortion and high gain stability

• Robust TO-264 package for enhanced thermal handling

• Suitable for high-current switching and amplification

• Long-term reliability in harsh conditions

• RoHS-compliant construction

These features make it a preferred choice among bold Bipolar Transistors – BJT by JSMSEMI for both industrial and audio applications.

Applications of MJL3281AG-JSM

This high-performance BJT is suited for:

• High-fidelity audio power amplifiers

• Power supply regulation

• High-current switching systems

• Industrial motor control circuits

• Inverter and converter modules

• Signal amplification stages

• High-power electronic devices

Its capability makes it indispensable for both bold Semiconductors and bold Discrete Semiconductors markets.

Wiring & Connection Overview

• Proper heatsink installation is essential due to high power dissipation

• Ensure correct polarity: Base, Collector, Emitter orientation

• Use thermal grease when mounting to heatsinks

• Protect with flyback diodes when used with inductive loads

• Ensure adequate PCB trace width for high current flow

These steps ensure safe integration of bold Bipolar Transistors – BJT by JSMSEMI into power circuits.

Use Case Scenario: High-End Audio Amplifier Design

Scenario: A premium audio amplifier manufacturer required a transistor with superb linearity and low distortion.
Problem: Conventional BJTs introduced signal distortion at high power levels.
Solution: The MJL3281AG-JSM Bipolar Transistors – BJT by JSMSEMI offered high current handling and exceptional audio performance.
Result: Cleaner output, reduced THD, and improved amplifier efficiency.

This makes the device ideal for demanding bold Transistors and bold Bipolar Transistors – BJT by JSMSEMI applications.

Why Buy from Xon Electronics?

Xon Electronics provides authentic bold Bipolar Transistors – BJT by JSMSEMI and other bold Semiconductors, offering:

• 100% genuine JSMSEMI components

• Global logistics network

• Competitive pricing for bulk and OEM orders

• Technical component sourcing support

• Safe and fast ordering process

Order now at www.xonelec.com.

Conclusion

The MJL3281AG-JSM Bipolar Transistors – BJT by JSMSEMI deliver excellent power output, thermal reliability, and superior audio performance. As key members of bold Semiconductors, bold Discrete Semiconductors, and bold Transistors, they stand out as top-tier solutions for high-power electronics.

FAQs – MJL3281AG-JSM

Q1. What type of transistor is MJL3281AG-JSM?
It is an NPN bold Bipolar Transistors – BJT by JSMSEMI.

Q2. What applications does it suit best?
High-power amplifiers, motor control, switching circuits, and power supplies.

Q3. What is the maximum collector current?
15A.

Q4. What category does it belong to?
It falls under bold Semiconductors, bold Discrete Semiconductors, and bold Transistors.

Q5. Where can it be purchased?
Buy from www.xonelec.com with worldwide shipping.

SI7884BDP-T1-GE3 MOSFETs by JSMSEMI – High-Efficiency Power Switching

The MOSFETs SI7884BDP-T1-GE3 by JSMSEMI are advanced Semiconductors designed for efficient power management and high-speed switching. As part of the Discrete Semiconductors family, these Transistors fall under the MOSFETs category, offering low on-resistance and high current handling capability. This makes them ideal for power supply designs, DC-DC converters, and motor control applications.

In this blog, we’ll cover the technical specifications, key features, applications, pin configuration, use case scenario, datasheet access, and why you should buy online at XON Electronics.

1. Technical Specifications of SI7884BDP-T1-GE3

• Manufacturer: JSMSEMI

• Part Number: SI7884BDP-T1-GE3

• Type: MOSFETs

• Category: Semiconductors, Discrete Semiconductors, Transistors

• Drain-to-Source Voltage (Vds): 30V

• Continuous Drain Current (Id): 70A

• RDS(on): 3.5mO (typical)

• Gate Charge (Qg): Low for fast switching

• Package: PowerPAK SO-8

• Polarity: N-channel

2. Key Features of SI7884BDP-T1-GE3

• Ultra-low RDS(on) for reduced conduction losses

• High current capability up to 70A

• Fast switching speeds for efficient operation

• Rugged PowerPAK SO-8 package for thermal stability

• Suitable for synchronous rectification and DC-DC converters

• Energy-efficient design for extended product life

The SI7884BDP-T1-GE3 MOSFETs deliver outstanding performance within the Transistors and MOSFETs category.

3. Applications of SI7884BDP-T1-GE3

The SI7884BDP-T1-GE3 MOSFETs by JSMSEMI are used in:

• DC-DC converters and voltage regulators

• Power supply modules

• Motor drivers and controllers

• Battery management systems

• Load switching applications

• Consumer and industrial electronics

4. Pin Configuration and Connection Overview

• Drain (D): Connected to load

• Source (S): Connected to ground

• Gate (G): Voltage-controlled input for switching

• Compact PowerPAK SO-8 design ensures easy integration on PCBs.

5. Use Case Scenario: DC-DC Converter Application

Scenario: A power electronics company required an efficient MOSFET for their DC-DC converter.
Problem: Existing solutions had high losses, reducing efficiency.
Solution: The SI7884BDP-T1-GE3 MOSFETs provided low RDS(on) and high current capacity.
Result: Improved efficiency, reduced heat generation, and extended device lifespan.

6. Download Datasheet for SI7884BDP-T1-GE3

Download SI7884BDP-T1-GE3 Datasheet from XON Electronics

7. Why Buy from XON Electronics?

At XON Electronics, we provide genuine JSMSEMI products including the SI7884BDP-T1-GE3 with:

• 100% Authentic MOSFETs
• Worldwide shipping – USA, India, Australia, Europe & more
• Bulk and OEM pricing options
• Expert technical support
• Secure and reliable online shopping

8. Also Available from Other Manufacturers

In addition to JSMSEMI, XON Electronics also supplies MOSFETs from:

• Vishay

This ensures a broad selection of Discrete Semiconductors for various applications.

9. FAQs – SI7884BDP-T1-GE3 MOSFETs

Q1. What is the maximum drain current?
It supports up to 70A continuous current.

Q2. What is the typical RDS(on)?
It offers a low 3.5mO for efficiency.

Q3. What package type is used?
It comes in a compact PowerPAK SO-8 package.

Q4. Is it suitable for motor drivers?
Yes, it is ideal for motor control and high-current switching.

Q5. Where can I buy SI7884BDP-T1-GE3?
From www.xonelec.com with global delivery.

Conclusion

The SI7884BDP-T1-GE3 MOSFETs by JSMSEMI deliver high efficiency, fast switching, and superior thermal performance. As part of the Semiconductors, Discrete Semiconductors, Transistors, MOSFETs family, they are ideal for power supplies, converters, and motor control applications.

Buy now at XON Electronics for genuine JSMSEMI components and worldwide delivery.

TDA7851L Audio Amplifiers by JSMSEMI – Buy Online at XON

The Audio Amplifiers TDA7851L by JSMSEMI are high-fidelity quad-bridge power amplifiers designed for superior audio performance in automotive and multimedia applications. Belonging to the Semiconductors, Integrated Circuits - ICs, Audio ICs, Audio Amplifiers category, this device delivers 4 x 50W output with low distortion and high efficiency, making it a preferred choice for premium sound systems.

1. Technical Specifications of TDA7851L

• Manufacturer: JSMSEMI

• Part Number: TDA7851L

• Type: Audio Amplifiers

• Configuration: Quad bridge (4 x 50W)

• Operating Voltage: 8V – 18V

• Output Power: 50W/channel @ 4O

• THD: < 0.02% at 1kHz

• Efficiency: High efficiency with reduced heat generation

• Protections: Short-circuit, overload, and thermal shutdown

• Package: Multiwatt-25

• Category: Semiconductors, Integrated Circuits - ICs, Audio ICs, Audio Amplifiers

Designed to meet strict automotive-grade standards, the TDA7851L ensures long-lasting reliability and consistent performance.

2. Key Features of TDA7851L Audio Amplifiers

• 4 x 50W quad-bridge configuration for powerful stereo and surround sound

• Ultra-low distortion for crystal-clear audio output

• Integrated thermal, short-circuit, and overload protection

• Low noise preamplifier stage for enhanced clarity

• High efficiency for reduced power consumption and heat

3. Applications of TDA7851L

• OEM car audio systems

• Aftermarket automotive sound upgrades

• Marine and recreational vehicle audio setups

• Embedded multimedia systems

• High-power in-vehicle entertainment units

4. Wiring and Connection Overview

Typical wiring setup:

• Power Supply: +12V (Vcc) to Pin 13

• Ground: GND to Pin 8/17

• Speaker Outputs:

  • Front Left: Pins 1 & 2

  • Front Right: Pins 24 & 25

  • Rear Left: Pins 5 & 6

  • Rear Right: Pins 20 & 21

• Audio Input: Connect preamp left/right channels to input pins

5. Use Case Scenario – Automotive Audio Enhancement

Scenario: A car audio installer needed a cost-effective amplifier IC capable of delivering clean sound at high volume without distortion.
Problem: Previous amplifiers overheated and degraded audio quality under continuous load.
Solution: The TDA7851L Audio Amplifiers provided superior sound clarity, high thermal tolerance, and consistent performance.
Result: Enhanced customer satisfaction, fewer component failures, and increased installation efficiency.

6. Download Datasheet for TDA7851L

Get complete specifications, pin configurations, and design guidelines:
Download TDA7851L Datasheet from Xon Electronics

7. Also Available from Other Manufacturers

The TDA7851L Audio Amplifiers are also available from:

• STMicroelectronics

8. Why Buy from Xon Electronics?

• 100% Genuine Audio ICs and Audio Amplifiers

• Global shipping – USA, India, Australia, Europe & more

• Bulk order discounts for OEMs and installers

• Technical assistance for integration

• Secure and fast online ordering

9. FAQs – TDA7851L Audio Amplifiers

Q1: What is the output power?
A: 50W/channel @ 4O.

Q2: Is it suitable for automotive applications?
A: Yes, it’s designed for automotive-grade reliability.

Q3: Does it have built-in protection features?
A: Yes, including thermal shutdown, overload, and short-circuit protection.

Q4: Can it be used in marine systems?
A: Yes, with proper environmental protection.

Q5: Where can I purchase it globally?
A: At www.xonelec.com with worldwide delivery.

Conclusion

The TDA7851L Audio Amplifiers by JSMSEMI deliver high-power output, low distortion, and outstanding efficiency for automotive and multimedia systems. With integrated protection features and automotive-grade reliability, it’s a top choice for premium audio solutions. Available now at Xon Electronics with global shipping to USA, India, Australia, Europe, and more.