The 2520 Series Data and Signal Surge Protective Devices are designed to protect sensitive electronic equipment from transient voltage surges. These devices are critical in ensuring the stability and longevity of your electronics, especially in environments prone to electrical disturbances.
The Bourns Model 2520 Series is a Data and Signal Surge Protective Device (SPD) designed to protect datelines, providing surge protection for 2-pair lines or 4 single lines with common reference poten..
View Products

The Bourns Model 1220 Series is a surge suppressor with thermal protection designed to open in the event of overheating due to an abnormal overvoltage or temporary overvoltage (TOV) and will interrupt any abnormal current that may be encountered, up to rated limits.
Features
Complies with UL 1449 and IEC/EN 61643-11 standards
UL recognized Type 4,Type 2 location SPD, passed short circuit current rating (SCCR) @ 200 kA
High reliability protected MOV with Advan..
View Products

MF-NSMF models are intended for reflow soldering (including, but not limited to heating plate, hot air, IR, nitrogen, and vapor phase). Wave soldering is permissible only if the device is on the top of the PCB, opposite the heat source. Hand soldering is not recommended for these devices. All temperatures refer to the topside of the device, measured on the device body surface. If reflow temperatures exceed the recommended profile, devices may not meet the published specifications. Compatib..
View Products

Bourns SF-1206HH-R and SF-1206HHA-R SinglFuse SMD Fuses feature a metal foil chip design for overcurrent protection and an EIA 1206 footprint. The SF-1206HH-R series consists of standard fuses, while the SF-1206HHA-R series fuses are AEC-Q200 compliant.
These fuses offer a small chip size with a high current rating of up to 30A and UL 248 compliance. Bourns SF-1206HH-R and SF-1206HHA-R SMD Fuses address the growing need for effective circuit protection in a variety of applications, includ..
View Products

Bourns new and improved next-generation surface mount 2-electrode GDT surge protection devices were designed using Bourns proprietary, advanced computer simulation techniques and provide industry-leading maximum impulse voltage limiting specifications in a small, environmentally rugged surface mount package. The performance of the Bourns GDT25 Series contributes significantly to increased protection against induced voltage transients such as lightning and AC induction. Furthermore, the increase..
View Products