ADM3202ARUZ-REEL RS-232 Interface IC by Analog Devices – Reliable Serial Communication for Modern Electronics

The RS-232 Interface IC ADM3202ARUZ-REEL by Analog Devices is a compact, high-performance transceiver designed to provide reliable RS-232 communication for embedded devices, industrial systems, automation equipment, and data-communication hardware. Engineered for low-power operation and compliance with TIA/EIA-232-F standards, it stands out in the category of Semiconductors, Integrated Circuits - ICs, Interface ICs, and especially RS-232 Interface IC by Analog Devices products.

In this blog, we’ll explore its specifications, features, applications, wiring configuration, and how you can purchase the ADM3202ARUZ-REEL from Xon Electronics.

Technical Specifications of ADM3202ARUZ-REEL

• Manufacturer: Analog Devices

• Part Number: ADM3202ARUZ-REEL

• Type: RS-232 Interface IC

• Supply Voltage: 3V to 5.5V

• Data Rate: Up to 250 kbps

• Channels: Dual Driver / Dual Receiver

• Operating Temperature: -40°C to +85°C

• Package: 16-TSSOP

• Protection: Short-circuit protection, ±15 kV ESD protection

• Category: Semiconductors, Integrated Circuits - ICs, Interface ICs, RS-232 Interface IC by Analog Devices

This IC complies with RS-232 protocol requirements while maintaining low power consumption and robust signal integrity.

Key Features of ADM3202ARUZ-REEL RS-232 Interface IC

• High Data Rates (Up to 250 kbps) – Supports fast, stable serial communication

• Low Power Consumption – Ideal for battery-powered systems

• Dual Transmitters & Receivers – Simplifies two-way communication designs

• ±15 kV ESD Protection – Ensures durability in harsh industrial conditions

• 3V to 5.5V Operation – Flexible supply compatibility

• TSSOP Slim Package – Compact form factor for space-constrained projects

These key features highlight why it’s one of the most efficient components in the Semiconductors, Integrated Circuits - ICs, Interface ICs, and RS-232 Interface IC by Analog Devices lineup.

Applications of ADM3202ARUZ-REEL

This RS-232 transceiver is widely used in systems that require reliable serial communication:

• Industrial automation and control

• Embedded microcontroller systems

• Point-of-sale (POS) devices

• Networking and communication hardware

• Modems, routers, and gateways

• Medical and diagnostic equipment

• Portable instruments

Engineers rely on this IC for consistent performance in electrically noisy environments.

Wiring and Connection Overview

A typical connection setup for the ADM3202ARUZ-REEL includes:

[MCU Logic] ? TTL Input/Output Pins

ADM3202ARUZ-REEL RS-232 Drivers/Receivers

[External Device] ? RS-232 Ports (TX, RX lines)

With clearly defined logic-level and RS-232-level pins, the IC is easy to integrate into any embedded system.

Use Case Scenario: Industrial Automation Controller

Scenario: An industrial automation system needed a stable RS-232 driver for reliable PLC-to-sensor communication.
Problem: Existing ICs caused data errors due to ESD events and electrical noise.
Solution: The ADM3202ARUZ-REEL RS-232 Interface IC by Analog Devices offered ±15 kV ESD protection, low power consumption, and fast data rates.
Result: Improved stability, reduced downtime, and long-term communication reliability.

This showcases why this component is favored within Semiconductors, Integrated Circuits - ICs, Interface ICs, and RS-232 Interface IC by Analog Devices solutions.

Download Datasheet for ADM3202ARUZ-REEL

Need detailed specifications, pin configuration, or electrical characteristics?

Download ADM3202ARUZ-REEL Datasheet from Xon Electronics 

Why Buy from Xon Electronics?

Xon Electronics offers original Analog Devices components including the ADM3202ARUZ-REEL, with:

• 100% Genuine ICs

• Worldwide Shipping (USA, India, Europe, Australia & more)

• Bulk Order Pricing

• Expert Technical Support

• Secure Checkout & Reliable Delivery

Order from www.xonelec.com and get the best quality electronic components globally.

Conclusion

The ADM3202ARUZ-REEL RS-232 Interface IC by Analog Devices is an excellent choice for engineers needing a robust, compact, high-speed RS-232 transceiver. With strong ESD protection, low power consumption, and dual-channel communication, it remains one of the most trusted ICs in the Semiconductors, Integrated Circuits - ICs, Interface ICs, and RS-232 Interface IC by Analog Devices categories.

FAQs – ADM3202ARUZ-REEL RS-232 Interface IC

Q1. What voltage does the ADM3202ARUZ-REEL operate on?
It operates from 3V to 5.5V.

Q2. What data rate does it support?
It supports data rates up to 250 kbps.

Q3. What protection features are included?
It offers ±15 kV ESD protection and short-circuit protection.

Q4. Is it suitable for industrial systems?
Yes, it is ideal for harsh environments requiring stable serial communication.

Q5. Where can I buy it?
Purchase directly from www.xonelec.com with global shipping.

SN75176BDR RS-422/RS-485 Interface IC by Texas Instruments – Robust Differential Bus Transceiver for Reliable Communication

The  RS-422/RS-485 Interface IC SN75176BDR by Texas Instruments is a high-performance differential bus transceiver designed for balanced transmission lines. It supports multipoint communication over long distances and offers noise-resistant data transmission in industrial automation, data acquisition, and communication systems.

In this blog, we’ll explore the IC’s technical features, advantages, common use cases, wiring configuration, and how to purchase it from Xon Electronics. If you’re developing a system that requires stable, high-speed differential signaling, the RS-422/RS-485 Interface IC by Texas Instruments is an industry-trusted solution.

Technical Specifications of SN75176BDR

• Manufacturer: Texas Instruments

• Part Number: SN75176BDR

• IC Type: Differential Bus Transceiver

• Standards Supported: RS-422 and RS-485

• Supply Voltage: 4.75V to 5.25V

• Data Rate: Up to 10 Mbps

• Receiver Input Resistance: = 12kO

• Driver Output Voltage Swing: ±5V

• Number of Drivers/Receivers: 1 Driver, 1 Receiver

• Package: SOIC-8

• Category: Communication ICs, RS-422/RS-485 Interface IC by Texas Instruments

This compact, low-power IC is engineered for stable and reliable serial communication in electrically noisy environments.

Key Features of SN75176BDR

• Multipoint Bus Capability – Supports up to 32 devices on a single bus

• Differential Signaling – Minimizes electromagnetic interference and signal degradation

• High Data Rate – Operates up to 10 Mbps for fast communication

• Wide Operating Voltage – Works reliably across a broad voltage range

• Fail-Safe Design – Ensures predictable output when inputs are open or shorted

These features make the SN75176BDR RS-422/RS-485 Interface IC by Texas Instruments ideal for demanding industrial and embedded communication networks.

Applications of SN75176BDR

The RS-422/RS-485 Interface IC by Texas Instruments is used across industries in:

• Industrial Automation and Motor Control

• Building Management Systems

• Data Acquisition Devices

• Security and Surveillance Systems

• Smart Energy Meters and Power Monitoring

• RS-485/RS-422 Networked Systems

Thanks to its robust signaling and low power operation, this IC supports both legacy and modern embedded systems.

Wiring and Connection Overview

Typical RS-485 Bus Configuration with SN75176BDR:

1. Connect VCC (5V) and GND

2. Connect Driver A/B to the differential bus lines

3. Connect Receiver A/B for receiving signals from the bus

4. Tie RE and DE pins for enabling receiver/driver as needed

5. Use proper termination resistors for long cable lengths

This IC supports half-duplex communication, simplifying two-wire bus setups.

Use Case Scenario: Industrial Control System Communication Bus

Scenario: A factory automation solution needed a reliable communication IC to support long-distance, multipoint communication across machine modules.

Problem: Signal integrity degraded with previous ICs over 100-meter cable runs.

Solution: The SN75176BDR RS-422/RS-485 Interface IC by Texas Instruments provided noise-immune differential signaling with consistent data throughput.

Result: Improved communication reliability, simplified design, and reduced downtime.

This highlights why the RS-422/RS-485 Interface IC by Texas Instruments is a favorite among automation engineers.

Download Datasheet for SN75176BDR

Need electrical characteristics, timing diagrams, or layout recommendations?

Download SN75176BDR Datasheet from Xon Electronics

Why Buy from Xon Electronics?

At Xon Electronics, we offer genuine SN75176BDR RS-422/RS-485 Interface IC by Texas Instruments with:

• 100% Original Texas Instruments Components
• Global Shipping – USA, India, Australia, Europe & more
• Stock Available for Prototyping and Production
• Technical Support for RS-485 Bus Design
• Safe Online Ordering & Competitive Pricing

Order now at www.xonelec.com and strengthen your communication network.

Conclusion

The SN75176BDR RS-422/RS-485 Interface IC by Texas Instruments delivers robust differential signaling in a small SOIC-8 package, making it ideal for industrial and embedded communications. With support for high-speed data, low power draw, and multi-device bus capability, it is a reliable choice for RS-485/RS-422 applications. Available at Xon Electronics with global shipping to the USA, India, Australia, Europe, and beyond.

FAQs – SN75176BDR Interface IC

Q1. What communication standards does it support?
Both RS-422 and RS-485.

Q2. What is the maximum data rate?
Up to 10 Mbps.

Q3. How many devices can it support on a bus?
Up to 32 transceivers in a network.

Q4. Is it suitable for industrial applications?
Yes, it’s widely used in automation and control systems.

Q5. Where can I buy it globally?
From www.xonelec.com, shipping to USA, India, Australia, Europe, and other countries.