Introduction
The Cable Glands, Strain Reliefs & Cord Grips M3201GBH by Heyco are designed to provide reliable cable management, strain relief, and liquid-tight protection for pre-assembled cables. This component belongs to the Heyco-Tite Liquid Tight Cordgrips family and features a split-gland design that allows installation onto cables after the cable termination has already been assembled. Heyco specifies the M3201GBH for 1/2 NPT applications and a cable diameter range of approximately 5.3 mm to 8.5 mm.
As an important solution within Wire & Cable, Wire & Cable Management, and Cable Glands, Strain Reliefs & Cord Grips, the M3201GBH Cable Glands, Strain Reliefs & Cord Grips are well suited to industrial equipment, control systems, electrical enclosures, and other applications requiring dependable cable entry protection.
Technical Specifications of M3201GBH Cable Glands, Strain Reliefs & Cord Grips
General Specifications
Manufacturer: Heyco
Part Number: M3201GBH
Product Type: Liquid Tight Cordgrip
Series: Heyco-Tite Liquid Tight Cordgrips
Color: Gray
Material: Nylon 6/6 with TPE sealing gland
Cable Type: Pre-assembled cables
Cable Diameter Range: 5.3 mm to 8.5 mm
Hub Thread: 1/2 NPT
Design: Split gland with integral sealing ring
Maximum Overall Length: 42.7 mm
Thread Length: 11.2 mm
Product Category: Wire & Cable
Subcategory: Wire & Cable Management
Product Family: Cable Glands, Strain Reliefs & Cord Grips
The M3201GBH Cable Glands, Strain Reliefs & Cord Grips are designed to provide cable entry sealing and strain relief while accommodating pre-assembled cables. Heyco lists the part as a gray 1/2 NPT split liquid-tight cordgrip.
Key Features of M3201GBH Cable Glands, Strain Reliefs & Cord Grips
Design and Performance Benefits
Split-gland construction for pre-assembled cables.
Integral sealing ring for improved sealing at the mounting location.
Designed for liquid-tight cable entry applications.
1/2 NPT hub configuration.
Supports cable diameters from approximately 5.3 mm to 8.5 mm.
Nylon 6/6 construction with TPE sealing gland.
Gray finish for easy identification and professional installation.
Suitable for demanding wire-management applications.
Designed for NEMA 4, 4X, 6, and 6P applications according to Heyco.
The M3201GBH Cable Glands, Strain Reliefs & Cord Grips combine cable retention and sealing functions in a design intended for reliable Wire & Cable, Wire & Cable Management, and Cable Glands, Strain Reliefs & Cord Grips applications.
Applications of M3201GBH Cable Glands, Strain Reliefs & Cord Grips
Common Use Cases
Industrial electrical enclosures
Industrial automation equipment
Control panels
Factory machinery
Power and control equipment
Instrumentation systems
Outdoor electrical equipment
Pre-assembled cable installations
Industrial wire management
Electrical enclosure cable entry
The M3201GBH Cable Glands, Strain Reliefs & Cord Grips are particularly useful where pre-terminated cables need to pass through an enclosure while maintaining cable management and sealing performance. They can support applications involving Wire & Cable, Wire & Cable Management, and Cable Glands, Strain Reliefs & Cord Grips.
Installation and Connection Overview
Installation Guidelines
Confirm that the cable diameter is within the supported range.
Verify compatibility with the 1/2 NPT mounting location.
Pass the pre-assembled cable through the cordgrip body.
Apply the split gland around the cable.
Insert the gland and cable assembly into the cordgrip fingers.
Tighten the sealing nut to establish the required liquid-tight seal.
Verify the completed cable entry for secure mechanical retention.
Heyco specifically describes the split-gland design as suitable for cables that have already been terminated, such as RJ45 cables with Cat5e termination.
Use Case Example: Industrial Control Enclosure
Practical Implementation
Application: Industrial control cabinet containing pre-assembled communication and control cables.
Challenge: Routing terminated cables through an enclosure while maintaining reliable sealing and strain relief.
Solution: Engineers can use the M3201GBH Cable Glands, Strain Reliefs & Cord Grips by Heyco to accommodate a pre-assembled cable through a 1/2 NPT entry point.
Result: The split design simplifies installation without requiring removal of the existing cable termination, while the sealing system helps protect the enclosure cable entry.
This example demonstrates the usefulness of the M3201GBH Cable Glands, Strain Reliefs & Cord Grips in Wire & Cable, Wire & Cable Management, and Cable Glands, Strain Reliefs & Cord Grips applications.
Datasheet Information
For complete mechanical dimensions, cable diameter limits, material specifications, environmental ratings, installation instructions, and certification information, refer to the official Heyco Datasheet. Heyco specifies IP68 performance at 70 PSI / 5 BAR and approval for NEMA 4, 4X, 6, and 6P applications for this product family.
Why Buy M3201GBH Cable Glands, Strain Reliefs & Cord Grips from X-On Electronics?
Purchasing M3201GBH Cable Glands, Strain Reliefs & Cord Grips by Heyco from X-On Electronics provides several advantages:
Choose X-On Electronics for genuine Wire & Cable, Wire & Cable Management, and Cable Glands, Strain Reliefs & Cord Grips products backed by dependable global service.
FAQs – M3201GBH Cable Glands, Strain Reliefs & Cord Grips
What is the M3201GBH used for?
The M3201GBH Cable Glands, Strain Reliefs & Cord Grips are used for cable entry, strain relief, and liquid-tight sealing of pre-assembled cables in electrical enclosures and equipment.
Who manufactures the M3201GBH?
The M3201GBH is manufactured by Heyco.
What cable diameter does the M3201GBH support?
The M3201GBH supports cables with a diameter range of approximately 5.3 mm to 8.5 mm.
What type of thread does the M3201GBH use?
The M3201GBH uses a 1/2 NPT hub thread.
Where can I buy genuine M3201GBH Cable Glands, Strain Reliefs & Cord Grips?
You can purchase genuine M3201GBH Cable Glands, Strain Reliefs & Cord Grips from X-On Electronics with worldwide shipping and customer support.
Conclusion
The M3201GBH Cable Glands, Strain Reliefs & Cord Grips by Heyco provide a practical solution for managing and sealing pre-assembled cables in industrial and electrical applications. Its split-gland construction, 1/2 NPT configuration, integrated sealing ring, and compatibility with approximately 5.3 mm to 8.5 mm cable diameters make it suitable for a variety of enclosure and cable-entry applications.
As an important product within Wire & Cable, Wire & Cable Management, and Cable Glands, Strain Reliefs & Cord Grips, the M3201GBH Cable Glands, Strain Reliefs & Cord Grips are a useful choice for industrial automation, control panels, machinery, and electrical equipment. Purchase genuine Heyco products from X-On Electronics for competitive pricing, reliable sourcing, and worldwide delivery.