37200500431 Fuses with Leads by Littelfuse – Buy at XON

Introduction

Circuit protection is essential for helping safeguard electronic equipment against excessive current conditions. The 37200500431 Fuses with Leads - Through Hole by Littelfuse provide a practical fuse solution for compatible circuit protection applications.

As part of the Circuit Protection, Fuses, and Fuses with Leads - Through Hole categories, the 37200500431 can be considered for electronic designs requiring an appropriate overcurrent protection component.

Technical Specifications of 37200500431

• Manufacturer: Littelfuse

• Part Number: 37200500431

• Product Type: Fuses with Leads - Through Hole

• Categories: Circuit Protection, Fuses, Fuses with Leads - Through Hole

• Designed for compatible overcurrent protection applications

• Through-hole mounting format

• Leaded fuse construction

• Suitable for compatible electronic circuits

• Useful for PCB-based applications

• Intended for circuit protection requirements

The 37200500431 Fuses with Leads - Through Hole provide a practical option for designers requiring a leaded fuse for compatible circuit protection applications.

Key Features of 37200500431

The 37200500431 Fuses with Leads - Through Hole offer useful characteristics for compatible electronic designs:

• Suitable for overcurrent protection

• Through-hole mounting configuration

• Leaded format for PCB applications

• Practical circuit protection solution

• Suitable for compatible electronic equipment

• Useful for power and control circuits

• Supports protection against excessive current conditions

• Suitable for various compatible circuit designs

These Circuit Protection components can help protect suitable electronic circuits when correctly specified for the application's electrical requirements.

Applications of 37200500431

The 37200500431 Fuses with Leads - Through Hole can be considered for applications such as:

• Electronic equipment

• PCB assemblies

• Power supply circuits

• Control systems

• Industrial electronics

• Consumer electronics

• Instrumentation

• Electrical equipment

• Power management circuits

• Embedded electronic systems

For applications requiring Fuses, the 37200500431 should be selected according to voltage rating, current rating, interrupting capability, fuse characteristics, mounting requirements, operating temperature, and the specific protection requirements of the circuit.

Benefits of Using 37200500431

The 37200500431 Fuses with Leads - Through Hole can provide several benefits for compatible circuit designs:

• Supports overcurrent protection

• Practical through-hole installation

• Suitable for PCB assemblies

• Leaded configuration simplifies compatible board integration

• Useful for electronic and electrical equipment

• Helps protect circuits from excessive current

• Suitable for compatible power and control applications

Selecting appropriate Fuses with Leads - Through Hole requires careful consideration of the circuit's normal operating current, voltage, fault conditions, fuse response characteristics, environmental conditions, and required safety specifications.

Why Choose Littelfuse 37200500431?

Littelfuse develops circuit protection products for electronics, electrical equipment, automotive systems, industrial applications, and other markets. The 37200500431 Fuses with Leads - Through Hole can be considered by engineers, manufacturers, and designers seeking suitable fuse solutions for compatible PCB applications.

Choosing the correct Fuses helps provide appropriate protection while maintaining reliable circuit operation. Always verify the manufacturer's specifications before incorporating the 37200500431 into a specific design.

Download Datasheet

Download the official datasheet for the 37200500431 Fuses with Leads - Through Hole to review detailed electrical ratings, fuse characteristics, dimensions, lead configuration, operating conditions, safety information, and other technical parameters before selecting the component.37200500431 Datasheet (PDF)

Frequently Asked Questions (FAQs)

1. What is the 37200500431?

The 37200500431 is a Littelfuse product categorized under Fuses with Leads - Through Hole, intended for compatible circuit protection applications.

2. Who manufactures the 37200500431 Fuses with Leads - Through Hole?

The 37200500431 Fuses with Leads - Through Hole are manufactured by Littelfuse.

3. What are Fuses used for?

Fuses are circuit protection devices designed to interrupt excessive current and help protect compatible electrical and electronic circuits from overcurrent conditions.

4. Where can 37200500431 be used?

The 37200500431 Fuses with Leads - Through Hole can be considered for compatible PCB assemblies, electronic equipment, power supply circuits, control systems, instrumentation, industrial electronics, and other circuit protection applications.

5. What should be considered when selecting Circuit Protection?

When selecting Circuit Protection, consider the circuit's voltage and current requirements, fault conditions, fuse characteristics, interrupting capability, mounting configuration, operating temperature, applicable standards, and manufacturer specifications.

Conclusion

The 37200500431 Fuses with Leads - Through Hole by Littelfuse provide a practical solution for compatible overcurrent protection applications. As part of the Circuit Protection, Fuses, and Fuses with Leads - Through Hole categories, the product can be considered for PCB assemblies, electronic equipment, power supplies, control systems, instrumentation, and industrial electronics.

For genuine 37200500431 Fuses with Leads - Through Hole, competitive pricing, and convenient sourcing, Buy at XON.

Introduction

The Resettable Fuses - PPTC 1206L035/30WR by Littelfuse are designed to provide resettable overcurrent protection for electronic circuits and PCB assemblies. Using Positive Temperature Coefficient technology, these devices help limit excessive current during fault conditions and can recover toward their normal operating state after the fault is removed.

As part of Circuit Protection, Thermistors, and Resettable Fuses - PPTC, the 1206L035/30WR Resettable Fuses - PPTC are suitable for compact electronic designs where reliable and reusable overcurrent protection is required.

Technical Specifications of 1206L035/30WR Resettable Fuses - PPTC

General Specifications

• Manufacturer: Littelfuse

• Part Number: 1206L035/30WR

• Product Type: Resettable Fuse

• Technology: PPTC (Polymeric Positive Temperature Coefficient)

• Mounting Style: Surface Mount

• Product Category: Circuit Protection

• Product Family: Thermistors

• Subcategory: Resettable Fuses - PPTC

• Application: Electronic circuit overcurrent protection

• Package Format: Compact surface-mount design

The 1206L035/30WR Resettable Fuses - PPTC are designed for applications where a resettable protective component can help safeguard electronic circuitry from excessive current. Their compact construction makes them suitable for PCB applications involving Circuit Protection, Thermistors, and Resettable Fuses - PPTC.

Key Features of 1206L035/30WR Resettable Fuses - PPTC

Design and Performance Benefits

• Resettable protection against overcurrent conditions.

• PPTC technology supports reusable circuit protection.

• Compact surface-mount construction.

• Suitable for space-constrained PCB designs.

• Helps protect sensitive electronic circuitry.

• Can reduce the need for frequent replacement after a fault.

• Suitable for a wide range of electronic equipment.

• Manufactured by Littelfuse for circuit protection applications.

The 1206L035/30WR Resettable Fuses - PPTC provide a practical solution for electronic designs requiring dependable Circuit Protection, Thermistors, and Resettable Fuses - PPTC.

Applications of 1206L035/30WR Resettable Fuses - PPTC

Common Use Cases

• Consumer electronics

• Computer and peripheral equipment

• Telecommunications equipment

• Industrial electronic systems

• Power supply circuits

• Battery-powered equipment

• Control boards

• Embedded electronic systems

• Portable electronic devices

• PCB-based electronic equipment

The 1206L035/30WR Resettable Fuses - PPTC can be incorporated into electronic systems where Circuit Protection, Thermistors, and Resettable Fuses - PPTC are required to help protect circuits against excessive current.

How PPTC Resettable Fuses Work

Protection Principle

Under normal operating conditions, a PPTC resettable fuse has relatively low resistance and allows the circuit to operate normally. When excessive current flows, the component heats up and its resistance increases significantly, helping limit the current passing through the protected circuit.

Once the excessive-current condition is removed and the component cools, its resistance can return toward its normal operating condition. This resettable characteristic makes the 1206L035/30WR Resettable Fuses - PPTC useful for applications where repeated fault events may occur.

Installation and PCB Design Overview

Installation Guidelines

• Verify the component specifications against the circuit requirements.

• Confirm the recommended PCB footprint before placement.

• Follow the manufacturer's recommended soldering conditions.

• Ensure the component is correctly positioned on the PCB.

• Keep the normal operating current within the specified limits.

• Consider temperature and fault conditions during component selection.

• Test the completed circuit after assembly.

Correct component selection and installation are important for achieving reliable performance from the 1206L035/30WR Resettable Fuses - PPTC.

Use Case Example: Compact Electronic Control Board

Practical Implementation

Application: Compact electronic control equipment.

Challenge: Protecting sensitive PCB circuitry against excessive current while using a compact protection component.

Solution: Engineers can use the 1206L035/30WR Resettable Fuses - PPTC by Littelfuse as part of the circuit protection design.

Result: The surface-mount construction allows resettable overcurrent protection to be incorporated into compact electronic assemblies.

This example demonstrates how the 1206L035/30WR Resettable Fuses - PPTC can support electronic systems requiring Circuit Protection, Thermistors, and Resettable Fuses - PPTC.

Datasheet Information

For complete electrical ratings, resistance characteristics, trip characteristics, maximum voltage, maximum current, temperature derating, dimensions, PCB footprint, and soldering requirements, refer to the official Littelfuse product documentation before selecting the component for a specific application.

Why Buy 1206L035/30WR Resettable Fuses - PPTC from X-On Electronics?

Purchasing 1206L035/30WR Resettable Fuses - PPTC by Littelfuse from X-On Electronics provides several advantages:

• Genuine Littelfuse products

• Competitive pricing

• Bulk purchasing options

• Global sourcing support

• Worldwide shipping

• Professional customer support

• Reliable sourcing for electronic circuit protection requirements

Choose X-On Electronics for genuine Circuit Protection, Thermistors, and Resettable Fuses - PPTC products backed by dependable global service.

FAQs – 1206L035/30WR Resettable Fuses - PPTC

What is the 1206L035/30WR used for?

The 1206L035/30WR Resettable Fuses - PPTC are designed to provide resettable overcurrent protection for electronic circuits and PCB assemblies.

Who manufactures the 1206L035/30WR?

The 1206L035/30WR is manufactured by Littelfuse.

What does PPTC mean?

PPTC stands for Polymeric Positive Temperature Coefficient. PPTC devices increase resistance when excessive current causes the component to heat, helping limit current through the protected circuit.

Are PPTC resettable fuses reusable?

Yes. PPTC devices are designed to return toward their normal low-resistance state after the fault condition is removed and the component cools.

Where can I buy genuine 1206L035/30WR Resettable Fuses - PPTC?

You can purchase genuine 1206L035/30WR Resettable Fuses - PPTC from X-On Electronics with worldwide shipping and customer support.

Conclusion

The 1206L035/30WR Resettable Fuses - PPTC by Littelfuse provide a compact solution for resettable overcurrent protection in electronic circuits. Their PPTC technology makes them suitable for PCB designs where protection against excessive current and recovery after a fault are important.

As an important product within Circuit Protection, Thermistors, and Resettable Fuses - PPTC, the 1206L035/30WR Resettable Fuses - PPTC can be considered for consumer electronics, industrial equipment, telecommunications systems, control boards, and other electronic applications. Purchase genuine Littelfuse products from X-On Electronics for competitive pricing, reliable sourcing, and worldwide delivery.

Introduction

The Resettable Fuses - PPTC 1206L005/60WR by Littelfuse are designed to provide resettable overcurrent protection for electronic circuits. Based on Positive Temperature Coefficient technology, these protective components can help safeguard sensitive circuitry against excessive current conditions while reducing the need for conventional fuse replacement after a fault.

As part of Circuit Protection, Thermistors, and Resettable Fuses - PPTC, the 1206L005/60WR Resettable Fuses - PPTC are suitable for compact electronic designs where reliable circuit protection and PCB space efficiency are important.

Technical Specifications of 1206L005/60WR Resettable Fuses - PPTC

General Specifications

• Manufacturer: Littelfuse

• Part Number: 1206L005/60WR

• Product Type: Resettable Fuse

• Technology: PPTC (Polymeric Positive Temperature Coefficient)

• Mounting Style: Surface Mount

• Product Category: Circuit Protection

• Product Family: Thermistors

• Subcategory: Resettable Fuses - PPTC

• Application: Electronic circuit overcurrent protection

• Package Style: Compact surface-mount format

The 1206L005/60WR Resettable Fuses - PPTC are intended for circuit protection applications where a resettable protective component can provide an alternative to conventional one-time fuses. Their compact form factor makes them useful in PCB designs requiring efficient Circuit Protection, Thermistors, and Resettable Fuses - PPTC.

Key Features of 1206L005/60WR Resettable Fuses - PPTC

Design and Performance Benefits

• Resettable protection against overcurrent conditions.

• PPTC technology supports reusable circuit protection.

• Compact surface-mount construction.

• Suitable for space-constrained PCB designs.

• Helps protect sensitive electronic circuitry.

• Reduces the need for frequent fuse replacement.

• Suitable for electronic equipment and circuit boards.

• Manufactured by Littelfuse, a recognized circuit protection manufacturer.

The 1206L005/60WR Resettable Fuses - PPTC offer a practical solution for electronic designs requiring dependable Circuit Protection, Thermistors, and Resettable Fuses - PPTC.

Applications of 1206L005/60WR Resettable Fuses - PPTC

Common Use Cases

• Consumer electronics

• Computer and peripheral equipment

• Telecommunications equipment

• Industrial electronics

• Power supply circuits

• Battery-powered equipment

• Control boards

• Embedded electronic systems

• Portable electronic devices

• PCB-based electronic equipment

The 1206L005/60WR Resettable Fuses - PPTC can be incorporated into electronic systems where Circuit Protection, Thermistors, and Resettable Fuses - PPTC are required to help protect circuits from excessive current.

How PPTC Resettable Fuses Work

Protection Principle

A PPTC resettable fuse normally has low resistance during normal operating conditions. When excessive current causes the component to heat, its resistance increases significantly, reducing the current flowing through the protected circuit.

After the fault condition is removed and the component cools, its resistance can return toward its normal operating state. This resettable behavior makes the 1206L005/60WR Resettable Fuses - PPTC useful in applications where repeated overcurrent events may occur.

Installation and PCB Design Overview

Installation Guidelines

• Verify the fuse specifications against the application's operating requirements.

• Confirm the PCB footprint before placement.

• Observe the recommended soldering profile.

• Place the component in the correct PCB orientation and position.

• Ensure the normal operating current remains within the specified limits.

• Evaluate fault conditions when selecting the protective component.

• Verify circuit performance after assembly.

Correct component selection and PCB installation are important for achieving reliable performance from the 1206L005/60WR Resettable Fuses - PPTC.

Use Case Example: Compact Electronic Control Board

Practical Implementation

Application: Compact electronic control equipment.

Challenge: Protecting sensitive PCB circuitry against unexpected overcurrent conditions while avoiding a large protection component.

Solution: Engineers can use the 1206L005/60WR Resettable Fuses - PPTC by Littelfuse as part of the circuit protection strategy.

Result: The compact surface-mount design helps integrate resettable overcurrent protection into space-constrained electronic assemblies.

This example demonstrates how the 1206L005/60WR Resettable Fuses - PPTC can support electronic systems requiring Circuit Protection, Thermistors, and Resettable Fuses - PPTC.

Datasheet Information

For complete electrical ratings, resistance characteristics, trip characteristics, maximum voltage, maximum current, temperature derating, dimensions, recommended PCB layout, and soldering conditions, refer to the official Littelfuse product documentation before selecting the component for a specific design.

Why Buy 1206L005/60WR Resettable Fuses - PPTC from X-On Electronics?

Purchasing 1206L005/60WR Resettable Fuses - PPTC by Littelfuse from X-On Electronics provides several advantages:

• Genuine Littelfuse products

• Competitive pricing

• Bulk purchasing options

• Global sourcing support

• Worldwide shipping

• Professional customer support

• Reliable sourcing for electronic circuit protection requirements

Choose X-On Electronics for genuine Circuit Protection, Thermistors, and Resettable Fuses - PPTC products backed by dependable global service.

FAQs – 1206L005/60WR Resettable Fuses - PPTC

What is the 1206L005/60WR used for?

The 1206L005/60WR Resettable Fuses - PPTC are designed to provide resettable overcurrent protection for electronic circuits and PCB assemblies.

Who manufactures the 1206L005/60WR?

The 1206L005/60WR is manufactured by Littelfuse.

What does PPTC mean?

PPTC stands for Polymeric Positive Temperature Coefficient. PPTC components increase resistance when subjected to excessive current and heat, helping limit current through the protected circuit.

Are PPTC resettable fuses reusable?

Yes. Unlike conventional one-time fuses, PPTC devices can return toward their normal low-resistance state after the fault condition is removed and the component cools.

Where can I buy genuine 1206L005/60WR Resettable Fuses - PPTC?

You can purchase genuine 1206L005/60WR Resettable Fuses - PPTC from X-On Electronics with worldwide shipping and customer support.

Conclusion

The 1206L005/60WR Resettable Fuses - PPTC by Littelfuse provide a compact solution for resettable overcurrent protection in electronic circuits. Their PPTC technology makes them suitable for PCB designs where protection against excessive current and the ability to recover after a fault are important.

As an important product within Circuit Protection, Thermistors, and Resettable Fuses - PPTC, the 1206L005/60WR Resettable Fuses - PPTC can be considered for consumer electronics, industrial equipment, telecommunications systems, control boards, and other electronic applications. Purchase genuine Littelfuse products from X-On Electronics for competitive pricing, reliable sourcing, and worldwide delivery.

5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes by Littelfuse for Superior Transient Voltage Protection

Introduction

Modern electronic systems require robust protection against electrostatic discharge (ESD), voltage spikes, and transient surge events. The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes by Littelfuse are designed to provide fast response, high surge capability, and reliable circuit protection, ensuring the safety and longevity of sensitive electronic components.

As part of the Circuit Protection and ESD Protection Diodes / TVS Diodes categories, the 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes are widely used in industrial automation, automotive electronics, telecommunications, networking equipment, power supplies, renewable energy systems, and consumer electronics. The 5.0SMDJ70CA-T7 delivers dependable transient suppression for demanding applications.

Technical Specifications of 5.0SMDJ70CA-T7

• Manufacturer: Littelfuse

• Part Number: 5.0SMDJ70CA-T7

• Product Type: ESD Protection Diodes / TVS Diodes

• Categories: Circuit Protection, ESD Protection Diodes / TVS Diodes

• Surface-mount package

• High peak pulse power capability

• Ultra-fast response time

• Low leakage current

• Excellent transient suppression

• Bidirectional protection

• High reliability

• RoHS compliant (where applicable)

The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes are engineered to safeguard electronic systems from transient voltage damage while maintaining stable operation.

Key Features of 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes

The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes offer several significant advantages:

• High surge protection capability

• Fast transient response

• Reliable ESD protection

• Low leakage characteristics

• Long operational life

• Compact SMD package

• Excellent electrical stability

• Trusted Littelfuse manufacturing quality

These Circuit Protection and ESD Protection Diodes / TVS Diodes provide dependable protection for sensitive electronic equipment.

Applications of 5.0SMDJ70CA-T7

The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes are commonly used in:

• Industrial Automation Equipment

• Automotive Electronics

• Switching Power Supplies

• Telecommunications Systems

• Networking Equipment

• Renewable Energy Systems

• Consumer Electronics

• Embedded Control Systems

• Medical Electronics

• Data Communication Devices

The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes help protect valuable electronic circuits from harmful voltage transients and ESD events.

Benefits of Using 5.0SMDJ70CA-T7

Choosing the 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes provides numerous advantages:

• Excellent surge suppression

• Enhanced equipment reliability

• Fast response to transient events

• Improved circuit safety

• Reduced maintenance costs

• Long service life

• Compact PCB integration

• Cost-effective circuit protection

The 5.0SMDJ70CA-T7 is an ideal solution for designers seeking reliable transient voltage suppression in compact electronic systems.

Why Choose Littelfuse 5.0SMDJ70CA-T7?

Littelfuse is a globally trusted manufacturer of circuit protection components known for quality, innovation, and reliability. The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes provide industry-leading surge protection performance, making them suitable for industrial, automotive, telecommunications, and commercial electronics.

Download Datasheet

Download the official datasheet for the 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes to review complete electrical specifications, peak pulse power ratings, clamping voltage, package dimensions, thermal characteristics, and application recommendations before integrating the component into your design 5.0SMDJ70CA-T7 Datasheet (PDF)

Frequently Asked Questions (FAQs)

1. What is the 5.0SMDJ70CA-T7 used for?

The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes are used to protect electronic circuits from electrostatic discharge, voltage spikes, and transient overvoltage conditions.

2. Who manufactures the 5.0SMDJ70CA-T7?

The 5.0SMDJ70CA-T7 is manufactured by Littelfuse.

3. Which industries commonly use 5.0SMDJ70CA-T7 TVS diodes?

These devices are widely used in industrial automation, automotive electronics, telecommunications, networking equipment, renewable energy systems, consumer electronics, and power supplies.

4. What are the advantages of TVS diodes?

ESD Protection Diodes / TVS Diodes provide ultra-fast transient suppression, high surge handling capability, low leakage current, reliable circuit protection, and extended equipment life.

5. Where can I buy genuine 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes?

You can purchase genuine 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes by Littelfuse online at XON with competitive pricing, fast worldwide shipping, and dependable customer support.

Conclusion

The 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes by Littelfuse provide exceptional surge protection, rapid transient response, and long-term reliability for modern electronic applications. As part of the Circuit Protection and ESD Protection Diodes / TVS Diodes categories, they are ideal for industrial automation, automotive systems, telecommunications, networking equipment, and power electronics. Choose genuine 5.0SMDJ70CA-T7 ESD Protection Diodes / TVS Diodes and Buy Online at XON for authentic products, competitive pricing, and fast worldwide delivery.

1.5KE400A ESD Protection Diodes / TVS Diodes by Littelfuse for Reliable Surge and Transient Voltage Protection

Introduction

Electronic circuits are constantly exposed to voltage spikes, electrostatic discharge (ESD), and transient surges that can damage sensitive components. The 1.5KE400A ESD Protection Diodes / TVS Diodes by Littelfuse are designed to provide fast and reliable protection against transient voltage events, helping extend the lifespan and reliability of electronic equipment.

As part of the Circuit Protection and ESD Protection Diodes / TVS Diodes categories, the 1.5KE400A ESD Protection Diodes / TVS Diodes are widely used in industrial equipment, telecommunications, automotive electronics, power supplies, networking devices, and consumer electronics. The 1.5KE400A offers dependable surge suppression, fast response time, and robust protection for modern electronic designs.

Technical Specifications of 1.5KE400A

• Manufacturer: Littelfuse

• Part Number: 1.5KE400A

• Product Type: ESD Protection Diodes / TVS Diodes

• Categories: Circuit Protection, ESD Protection Diodes / TVS Diodes

• High surge power capability

• Fast response time

• Excellent transient suppression

• Reliable overvoltage protection

• Low leakage current

• Durable package construction

• High reliability

• RoHS compliant (where applicable)

The 1.5KE400A ESD Protection Diodes / TVS Diodes are engineered to safeguard electronic circuits from damaging voltage transients while maintaining long-term system reliability.

Key Features of 1.5KE400A ESD Protection Diodes / TVS Diodes

The 1.5KE400A ESD Protection Diodes / TVS Diodes provide several important advantages:

• High surge protection capability

• Fast transient response

• Reliable ESD protection

• Low leakage current

• Long operational life

• Rugged construction

• Stable electrical performance

• Trusted Littelfuse quality

These Circuit Protection and ESD Protection Diodes / TVS Diodes are ideal for protecting sensitive electronic circuits in demanding applications.

Applications of 1.5KE400A

The 1.5KE400A ESD Protection Diodes / TVS Diodes are commonly used in:

• Power Supplies

• Industrial Automation

• Automotive Electronics

• Telecommunications Equipment

• Consumer Electronics

• Data Communication Systems

• Networking Equipment

• Control Panels

• Embedded Systems

• General Electronic Circuit Protection

The 1.5KE400A ESD Protection Diodes / TVS Diodes provide dependable protection against electrical transients in a broad range of electronic systems.

Benefits of Using 1.5KE400A

Selecting the 1.5KE400A ESD Protection Diodes / TVS Diodes offers numerous benefits:

• Superior transient voltage suppression

• Enhanced equipment reliability

• Protection against ESD damage

• Longer system life

• Improved circuit safety

• Cost-effective surge protection

• Reliable high-energy absorption

• Reduced maintenance costs

The 1.5KE400A is an excellent choice for engineers designing reliable and protected electronic systems.

Also Available from Other Manufacturers

In addition to Littelfuse, similar 1.5KE400A ESD Protection Diodes / TVS Diodes or equivalent surge protection solutions may also be available from:

• Yangjie

• DOWO

• Diotec

• EIC Semiconductor

• STMicroelectronics

Availability may vary based on voltage rating, package type, and electrical specifications.

Why Choose Littelfuse 1.5KE400A?

Littelfuse is a globally recognized leader in circuit protection technologies. The 1.5KE400A ESD Protection Diodes / TVS Diodes combine proven surge suppression performance, high reliability, and excellent manufacturing quality, making them suitable for industrial, automotive, telecommunications, and consumer electronics.

Download Datasheet

Download the official datasheet for the 1.5KE400A ESD Protection Diodes / TVS Diodes to review complete electrical characteristics, surge ratings, clamping voltage, package dimensions, thermal information, and application guidelines before integrating the component into your design 1.5KE400A Datasheet (PDF)

Frequently Asked Questions (FAQs)

1. What is the 1.5KE400A used for?

The 1.5KE400A ESD Protection Diodes / TVS Diodes protect electronic circuits from voltage spikes, electrostatic discharge, and transient overvoltage events.

2. Who manufactures the 1.5KE400A?

The 1.5KE400A is manufactured by Littelfuse.

3. Which industries commonly use 1.5KE400A TVS diodes?

They are widely used in industrial automation, automotive electronics, telecommunications, networking equipment, power supplies, and consumer electronics.

4. What are the advantages of TVS diodes?

ESD Protection Diodes / TVS Diodes offer ultra-fast response, high surge handling capability, reliable overvoltage protection, low leakage current, and extended equipment reliability.

5. Where can I buy genuine 1.5KE400A ESD Protection Diodes / TVS Diodes?

You can purchase genuine 1.5KE400A ESD Protection Diodes / TVS Diodes by Littelfuse online at XON with competitive pricing, worldwide shipping, and dependable customer support.

Conclusion

The 1.5KE400A ESD Protection Diodes / TVS Diodes by Littelfuse deliver fast transient suppression, dependable surge protection, and long-term reliability for sensitive electronic circuits. As part of the Circuit Protection and ESD Protection Diodes / TVS Diodes categories, they are ideal for industrial, automotive, telecommunications, and power supply applications. Choose genuine 1.5KE400A ESD Protection Diodes / TVS Diodes and Buy Online at XON for authentic products, competitive pricing, and fast worldwide delivery.